Exploiting Micrometer-Scale Replication of Fungal Biotemplates for Multifunctional Uses in Electrochemistry and SERS Substrates.

In this paper, filamentous fungi have been used as biotemplates to integrate gold nanoparticles (Au-NPs) into the cell wall. A new chemical mechanism has been proposed to elucidate the assimilation of Au-NPs by fungi, considering the ionic current that arises in the function of fungal metabolism. After biological components were eliminated, mycelium-like gold microtubes have been obtained using different fungal species as precursors.

Novel Synthesis Route of Plasmonic CuS Quantum Dots as Efficient Co-Catalysts to TiO/Ti for Light-Assisted Water Splitting.

Self-doped CuS nanoparticles (NPs) were successfully synthesized via microwave-assisted polyol process to act as co-catalysts to TiO nanofiber (NF)-based photoanodes to achieve higher photocurrents on visible light-assisted water electrolysis. The strategy adopted to perform the copper cation sulfidation in polyol allowed us to overcome the challenges associated with the copper cation reactivity and particle size control. The impregnation of the CuS NPs on TiO NFs synthesized via hydrothermal corrosion of a metallic Ti support resulted in composites with increased visible and near-infrared light absorption compared to the pristine support.

Advancements in polyol synthesis: expanding chemical horizons and Néel temperature tuning of CoO nanoparticles.

The polyol synthesis of CoO nanoparticles (NPs) is typically conducted by dissolving and heating cobalt acetate tetrahydrate and water in diethylene glycol (DEG). This process yields aggregates of approximately 100 nm made of partially aligned primary crystals. However, the synthesis demands careful temperature control to allow the nucleation of CoO while simultaneously preventing reduction, caused by the activity of DEG.

Aquatic Fate and Ecotoxicology Effect of ZnS:Mn Quantum Dots on in Fresh Water.

With the increasing integration of nanomaterials into daily life, the potential ecotoxicological impacts of nanoparticles (NPs) have attracted increased attention from the scientific community. This study assessed the ecotoxicity of ZnS quantum dots (QDs) doped with varying molar concentrations of Mn on . The ZnS:Mn QDs were synthesized using the polyol method.

Gold and Iron Oxide Nanoparticle Assemblies on Turnip Yellow Mosaic Virus for In-Solution Photothermal Experiments.

The ability to construct three-dimensional architectures via nanoscale engineering is important for emerging applications in sensors, catalysis, controlled drug delivery, microelectronics, and medical diagnostics nanotechnologies. Because of their well-defined and highly organized symmetric structures, viral plant capsids provide a 3D scaffold for the precise placement of functional inorganic particles yielding advanced hierarchical hybrid nanomaterials. In this study, we used turnip yellow mosaic virus (TYMV), grafting gold nanoparticles (AuNP) or iron oxide nanoparticles (IONP) onto its outer surface.

Unusual, hierarchically structured composite of sugarcane pulp bagasse biochar loaded with Cu/Ni bimetallic nanoparticles for dye removal.

Biochar-supported nanocatalysts emerged as unique materials for environmental remediation. Herein, sugarcane pulp bagasse (SCPB) was wet-impregnated with Cu(NO)3HO and Ni(NO)6HO, then pyrolyzed at 500 °C, under N, for 1 h. We specifically focused on sugarcane pulp instead of SCB and biochar materials.

Interaction between carbon dots from folic acid and their cellular receptor: a qualitative physicochemical approach.

According to the World Health Organization, the number of cancers (all cancers, both sexes, all ages and worldwide) in 2020 reached a total of 19 292 789 new cases leading to 9 958 133 deaths during the same period. Many cancers could be cured if detected early. Preventing cancer and detecting it early are two essential strategies for controlling this pathology.

Green, zero-waste pathway to fabricate supported nanocatalysts and anti-kinetoplastid agents from sugarcane bagasse.

The conversion processes of sugarcane into direct-consumption sugar and juice are generating a tremendous amount of waste, the so-called sugarcane bagasse (SCB). Biochar preparation is among the practical solutions aiming to manage and valorize SCB into high added-value functional material (FM). Herein, we propose a novel zero-waste pathway to fabricate two FMs from one biomass.

Functionalized maghemite nanoparticles for enhanced adsorption of uranium from simulated wastewater and magnetic harvesting.

Maghemite (γ-FeO) nanoparticles (MNPs) were functionalized with 3-aminopropyltriethoxysilane (APTES) to give APTES@FeO (AMNP) which was then reacted with diethylenetriamine-pentaacetic acid (DTPA) to give a nanohybrid DTPA-APTES@FeO (DAMNP). Nano-isothermal titration calorimetry shows that DTPA complexation with uranyl ions in water is exothermic and has a stoichiometry of two DTPA to three uranyl ions. Density functional theory calculations indicate the possibility of several complexes between DTPA and UO with different stoichiometries.

Electron transfer between carbon dots and tetranuclear Dawson-derived sandwich polyanions.

Among the photocatalysts which could be used for converting solar energy, polyoxometalates are often regarded as ideal candidates because of their remarkable performances in photocatalytic water splitting and photodegradation of pollutants. Nonetheless, these polyanions are only capable of absorbing UV light, unless coupled to a visible-light photosensitizer. Carbon nanodots are especially promising for this purpose because of their strong visible-light absorption, photostability, non-toxicity, and very low production costs.

Water Vapor Photoelectrolysis in a Solid-State Photoelectrochemical Cell with TiO Nanotubes Loaded with CdS and CdSe Nanoparticles.

In this study, polyol-made CdS and CdSe crystalline nanoparticles (NPs) are loaded by impregnation on TiO nanotube arrays (TNTAs) for solar-simulated light-driven photoelectrochemical (PEC) water vapor splitting. For the first time, we introduce a safe way to utilize toxic, yet efficient photocatalysts by integration in solid-state PEC (SSPEC) cells. The enabling features of SSPEC cells are the surface protonic conduction mechanism on TiO and the use of polymeric electrolytes, such as Nafion instead of liquid ones, for operation with gaseous reactants, like water vapor from ambient humidity.

Preparation of FeO-Ag Nanocomposites with Silver Petals for SERS Application.

The formation of silver nanopetal-FeO poly-nanocrystals assemblies and the use of the resulting hetero-nanostructures as active substrates for Surface Enhanced Raman Spectroscopy (SERS) application are here reported. In practice, about 180 nm sized polyol-made FeO spheres, constituted by 10 nm sized crystals, were functionalized by (3-aminopropyl)triethoxysilane (APTES) to become positively charged, which can then electrostatically interact with negatively charged silver seeds. Silver petals were formed by seed-mediated growth in presence of Ag cations and self-assembly, using L-ascorbic acid (L-AA) and polyvinyl pyrrolidone (PVP) as mid-reducing and stabilizing agents, respectively.

Grafting TRAIL through Either Amino or Carboxylic Groups onto Maghemite Nanoparticles: Influence on Pro-Apoptotic Efficiency.

Tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL) is a member of the TNF cytokine superfamily. TRAIL is able to induce apoptosis through engagement of its death receptors DR4 and DR5 in a wide variety of tumor cells while sparing vital normal cells. This makes it a promising agent for cancer therapy.

Polyol Synthesis: A Versatile Wet-Chemistry Route for the Design and Production of Functional Inorganic Nanoparticles.

The term "polyol process" was first used in the late eighties by Fiévet, Lagier, and Figlarz [...

Highly Efficient Electron Transfer in a Carbon Dot-Polyoxometalate Nanohybrid.

Using solar radiation to fuel catalytic processes is often regarded as the solution to our energy needs. However, developing effective photocatalysts that are active under visible light has proven to be difficult, often due to the toxicity, instability, and high cost of suitable catalysts. We engineered a novel photoactive nanomaterial obtained by the spontaneous electrostatic coupling of carbon nanodots with [PWO], a molecular catalyst belonging to the class of polyoxometalates.

Polyol-Made Luminescent and Superparamagnetic β-NaYEuF@γ-FeO Core-Satellites Nanoparticles for Dual Magnetic Resonance and Optical Imaging.

Red luminescent and superparamagnetic β-NaYEuF@γ-FeO nanoparticles, made of a 70 nm-sized β-NaYEuF single crystal core decorated by a 10 nm-thick polycrystalline and discontinuous γ-FeO shell, have been synthesized by the polyol process. Functionalized with citrate ligands they show a good colloidal stability in water making them valuable for dual magnetic resonance and optical imaging or image-guided therapy. They exhibit a relatively high transverse relaxivity r = 42.

Synthesis of Magnetic Wires from Polyol-Derived Fe-Glycolate Wires.

Fe-glycolate wires with micrometer-scale lengths can be synthesized by the polyol process. Although the as-produced wires are in the paramagnetic state at room temperature, they are transformed into ferrimagnetic iron oxides and ferromagnetic metallic iron wires by reductive annealing. The shape of the wires is unchanged by reductive annealing, and it is possible to control the magnetic properties of the resulting wire-shaped ferri/ferromagnets by adjusting the annealing conditions.

Star-Shaped FeO-Au Core-Shell Nanoparticles: From Synthesis to SERS Application.

In this work, the preparation of magneto-plasmonic granular nanostructures and their evaluation as efficient substrates for magnetically assisted surface enhanced Raman spectroscopy (SERS) sensing are discussed. These nanostructures consist of star-shaped gold Au shell grown on iron oxide FeO multicores. They were prepared by seed-mediated growth of anisotropic, in shape gold nanosatellites attached to the surface of polyol-made iron oxide polycrystals.

On the first evidence of exchange-bias feature in magnetically contrasted consolidates made from CoFeO-CoO core-shell nanoparticles.

Hetero-nanostructures based on magnetic contrast oxides have been prepared as highly dense nanoconsolidates. Cobalt ferrite-cobalt oxide core-shell type nanoparticles (NPs) were synthesized by seed mediated growth in polyol and subsequently consolidated by Spark Plasma Sintering (SPS) at 500 °C for a few minutes while applying a uniaxial pressure of 100 MPa. It is interesting to note that the exchange bias feature observed in the core-shell NPs is reproduced in their ceramic counterparts, or even attenuated.

Assembly of gold nanoparticles using turnip yellow mosaic virus as an in-solution SERS sensor.

A common challenge in nanotechnology is the conception of materials with well-defined nanoscale structure. In recent years, virus capsids have been used as templates to create a network to organize 3D nano-objects, building thus new functional nanomaterials and then devices. In this work, we synthetized 3D gold nanoclusters and we used them as Surface Enhanced Raman Scattering (SERS) sensor substrates in solution.

On the limits of Reactive-Spark-Plasma Sintering to prepare magnetically enhanced nanostructured ceramics: the case of the CoFeO-NiO system.

Magnetic materials are crucial for the efficiency of the conversion-storage-transport-reconversion energy chain, and the enhancement of their performance has an important impact on technological development. The present work explores the possibility of preparing hetero-nano-structured ceramics based on magnetic oxides, by coupling a ferrimagnetic phase (F) with an antiferromagnetic one (AF) on the nanometric scale. The field-assisted sintering technique or SPS (Spark-Plasma Sintering), adopted at this purpose, ensures the preservation of nano-sized crystals within the final solid structure.

TRAIL acts synergistically with iron oxide nanocluster-mediated magneto- and photothermia.

Targeting TRAIL (Tumor necrosis factor (TNF)-Related Apoptosis-Inducing Ligand) receptors for cancer therapy remains challenging due to tumor cell resistance and poor preparations of TRAIL or its derivatives. Herein, to optimize its therapeutic use, TRAIL was grafted onto iron oxide nanoclusters (NCs) with the aim of increasing its pro-apoptotic potential through nanoparticle-mediated magnetic hyperthermia (MHT) or photothermia (PT). : The nanovector, NC@TRAIL, was characterized in terms of size, grafting efficiency, and potential for MHT and PT.

New Iron Oxide Nanoparticles Catechol-Grafted with Bis(amidoxime)s for Uranium(VI) Depletion of Aqueous Solution.

Environmental pollution caused by heavy metals constitutes a serious public health problem. In the case of uranium depletion, amidoxime groups are important because of their high affinity for uranium(VI). New series of bis(amidoxime)s with catechol-derived anchor groups were tested (b-AMD-1 and b-AMD-2).

The first one-pot synthesis of undoped and Eu doped β-NaYF4 nanocrystals and their evaluation as efficient dyes for nanomedicine.

Polygonal-shaped about 75 nm sized and highly crystallized Eu-doped β-NaYF particles were directly prepared under mild conditions using the polyol process. A set of operating parameters were optimized for such a purpose. A conventional heating under reflux for 30 min of a mixture of Y(III) and Eu(III) acetate, ammonium fluoride, sodium hydroxide and oleic acid (OA) dissolved in ethyleneglycol offered a pertinent material processing route if a large excess of NHF and an enough amount of OA were used.