Ultralight and Mechanically Robust TiCT Hybrid Aerogel Reinforced by Carbon Nanotubes for Electromagnetic Interference Shielding.

Lightweight materials with high electrical conductivity and robust mechanical properties are highly desirable for electromagnetic interference (EMI) shielding in modern portable and highly integrated electronics. Herein, a three-dimensional (3D) porous TiCT/carbon nanotube (CNT) hybrid aerogel was fabricated via a bidirectional freezing method for lightweight EMI shielding application. The synergism of the lamellar and porous structure of the MXene/CNT hybrid aerogels contributed extensively to their excellent electrical conductivity (9.

Shaping micro-clusters via inverse jamming and topographic close-packing of microbombs.

Designing topographic clusters is of significant interest, yet it remains challenging as they often lack mobility or deformability. Here we exploit the huge volumetric expansion (up to 3000%) of a new type of building block, thermally expandable microbombs. They consist of a viscoelastic polymeric shell and a volatile gas core, which, within structural confinement, create micro-clusters via inverse jamming and topographical close-packing.

Multidirectional Wrinkle Patterns Programmed by Sequential Uniaxial Strain with Conformal yet Nontraceable Masks.

Surface wrinkling is a promising route to control the mechanical, electrical, and optical properties of materials in a wide range of applications. However, previous artificial wrinkles are restricted to single or random orientation and lacks selectivity. To address this challenge, this study presents multidirectional wrinkle patterns with high selectivity and orientation through sequential uniaxial strain with conformal polymeric shadow masks.

Density-tunable lightweight polymer composites with dual-functional ability of efficient EMI shielding and heat dissipation.

Lightweight dual-functional materials with high EMI shielding performance and thermal conductivity are of great importance in modern cutting-edge applications, such as mobile electronics, automotive, aerospace, and military. Unfortunately, a clear material solution has not emerged yet. Herein, we demonstrate a simple and effective way to fabricate lightweight metal-based polymer composites with dual-functional ability of excellent EMI shielding effectiveness and thermal conductivity using expandable polymer bead-templated Cu hollow beads.

Multifunctional Mesoporous Ionic Gels and Scaffolds Derived from Polyhedral Oligomeric Silsesquioxanes.

A new methodology for fabrication of inorganic-organic hybrid ionogels and scaffolds is developed through facile cross-linking and solution extraction of a newly developed ionic polyhedral oligomeric silsesquioxane with inorganic core. Through design of various cationic tertiary amines, as well as cross-linkable functional groups on each arm of the inorganic core, high-performance ionogels are fabricated with excellent electrochemical stability and unique ion conduction behavior, giving superior lithium ion battery performance. Moreover, through solvent extraction of the liquid components, hybrid scaffolds with well-defined, interconnected mesopores are utilized as heterogeneous catalysts for the CO-catalyzed cycloaddition of epoxides.

Nonlinear Frameworks for Reversible and Pluripotent Wetting on Topographic Surfaces.

Soft, ultrathin frameworks nonlinearly organized in tandem are presented to realize both reversible and pluripotent wetting on topographic surfaces. A design rule is introduced by establishing and proving the theoretical model upon hierarchical textures. Nonlinear frameworks can be conformally and reversibly wet upon complex topography in nature, thereby overcoming the wetting problems in previous conventional solid systems.

Electromagnetic interference shielding with 2D transition metal carbides (MXenes).

Materials with good flexibility and high conductivity that can provide electromagnetic interference (EMI) shielding with minimal thickness are highly desirable, especially if they can be easily processed into films. Two-dimensional metal carbides and nitrides, known as MXenes, combine metallic conductivity and hydrophilic surfaces. Here, we demonstrate the potential of several MXenes and their polymer composites for EMI shielding.

Facilitated Ion Transport in Smectic Ordered Ionic Liquid Crystals.

A novel ionic mixture of an imidazolium-based room-temperature ionic liquid containing ethylene-oxide-functionalized phosphite anions is fabricated, which, when doped with lithium salt, self-assembles into a smectic-ordered ionic liquid crystal through Coulombic interactions between the ion species. Interestingly, the smectic order in the ionic-liquid-crystal ionogel facilitates ionic transport.

Lithium Dendrite Suppression with UV-Curable Polysilsesquioxane Separator Binders.

For the first time, an inorganic-organic hybrid polymer binder was used for the coating of hybrid composites on separators to enhance thermal stability and to prevent formation of lithium dendrite in lithium metal batteries. The fabricated hybrid-composite-coated separators exhibited minimal thermal shrinkage compared with the previous composite separators (<5% change in dimension), maintenance of porosity (Gurley number ∼400 s/100 cm(3)), and high ionic conductivity (0.82 mS/cm).

Biomass-Derived Thermally Annealed Interconnected Sulfur-Doped Graphene as a Shield against Electromagnetic Interference.

Electrically conductive thin carbon materials have attracted remarkable interest as a shielding material to mitigate the electromagnetic interference (EMI) produced by many telecommunication devices. Herein, we developed a sulfur-doped reduced graphene oxide (SrGO) with high electrical conductivity through using a novel biomass, mushroom-based sulfur compound (lenthionine) via a two-step thermal treatment. The resultant SrGO product exhibited excellent electrical conductivity of 311 S cm(-1), which is 52% larger than 205 S cm(-1) for undoped rGO.

High through-plane thermal conduction of graphene nanoflake filled polymer composites melt-processed in an L-shape kinked tube.

Design of materials to be heat-conductive in a preferred direction is a crucial issue for efficient heat dissipation in systems using stacked devices. Here, we demonstrate a facile route to fabricate polymer composites with directional thermal conduction. Our method is based on control of the orientation of fillers with anisotropic heat conduction.

Self-assembled block copolymer micelles with silver-carbon nanotube hybrid fillers for high performance thermal conduction.

The development of polymer-filled composites with an extremely high thermal conductivity (TC) that is competitive with conventional metals is in great demand due to their cost-effective process, light weight, and easy shape-forming capability. A novel polymer composite with a large thermal conductivity of 153 W m(-1) K(-1) was prepared based on self-assembled block copolymer micelles containing two different fillers of micron-sized silver particles and multi-walled carbon nanotubes. Simple mechanical mixing of the components followed by conventional thermal compression at a low processing temperature of 160 °C produced a novel composite with both structural and thermal stability that is durable for high temperature operation up to 150 °C as well as multiple heating and cooling cycles of ΔT = 100 °C.

Fouling-tolerant nanofibrous polymer membranes for water treatment.

Nafion/polyvinylidene fluoride (PVDF) nanofibrous membranes with electrostatically negative charges on the fiber surface were fabricated via electrospinning with superior water permeability and antifouling behaviors in comparison with the conventional microfiltration membranes. The fiber diameter and the resultant pore size in the nanofibrous membranes were easily controlled through tailoring the properties of the electrospinning solutions. The electrospun Nafion/PVDF nanofibrous membranes revealed high porosities (>80%) and high densities of sulfonate groups on the membrane surface, leading to praiseworthy water permeability.

RTA-treated carbon fiber/copper core/shell hybrid for thermally conductive composites.

In this paper, we demonstrate a facile route to produce epoxy/carbon fiber composites providing continuous heat conduction pathway of Cu with a high degree of crystal perfection via electroplating, followed by rapid thermal annealing (RTA) treatment and compression molding. Copper shells on carbon fibers were coated through electroplating method and post-treated via RTA technique to reduce the degree of imperfection in the Cu crystal. The epoxy/Cu-plated carbon fiber composites with Cu shell of 12.

Copper shell networks in polymer composites for efficient thermal conduction.

Thermal management of polymeric composites is a crucial issue to determine the performance and reliability of the devices. Here, we report a straightforward route to prepare polymeric composites with Cu thin film networks. Taking advantage of the fluidity of polymer melt and the ductile properties of Cu films, the polymeric composites were created by the Cu metallization of PS bead and the hot press molding of Cu-plated PS beads.

Thermal annealing effects on the physical properties of styrenic pentablock ionomers and their electromechanical responses.

Thermal annealing effect on the physical properties of two ionic (poly((t-butyl-styrene)-b-(ethylene-r-propylene)-b-(styrene-r-styrene sulfonate)-b-(ethylene-r-propylene)-b-(t-butyl-styrene (SSPB) pentablock copolymers with different ion exchange capacities (IEC; 1.5 and 2.0 meq/g) and their electromechanical responses in ionic polymer-metal composite (IPMC) devices have been investigated.

Dispersion and reaggregation of nanoparticles in the polypropylene copolymer foamed by supercritical carbon dioxide.

For the preparation of nanocomposites, we conducted environmentally benign foaming processing on polypropylene (PP) copolymer/clay nanocomposites via a batch process in an autoclave. We investigated the dispersion and the exfoliation of the nanoclay particles. Full exfoliation was achieved by the foamability of the matrix PP copolymer using supercritical carbon dioxide (sc CO2) and subcritical carbon dioxide (sub CO2).

A facile route to fabricate stable reduced graphene oxide dispersions in various media and their transparent conductive thin films.

In this paper, we demonstrate an easy way to prepare a stable reduced graphene oxide (RGO) dispersion in aqueous or organic media by simple adjustment of the degree of reduction and pH of RGO dispersion, and a subsequent fabrication of transparent conductive RGO thin films on various substrates using a spray coating technique. RGOs were prepared using a hydrazine reducing agent from graphene oxide (GO), which was oxidized from graphite via a modified Hummers' method. The degree of reduction determined the surface properties, such as atomic composition, surface polarity, and potential of RGO platelets.

Enhanced interfacial adhesion between an amorphous polymer (polystyrene) and a semicrystalline polymer [a polyamide (nylon 6)].

We studied enhanced interfacial adhesion between an amorphous polymer (polystyrene, PS) and a semicrystalline polymer (a polyamide, Ny6). The fracture mechanism for this system was investigated to elicit a universal description on the fracture mechanism. The surface modification of PS to provide functional groups that can react with the functional groups of Ny6 was carried out with ion-beam and/or plasma treatment.

Surface functionalization of a poly(vinylidene fluoride): effect on the adhesive and piezoelectric properties.

We studied the effect of the surface functionalization and crystalline phase change of poly(vinylidene fluoride) (PVDF) films on their adhesion and piezoelectric properties. The surface modification of PVDF was carried out with ion beam and/or plasma treatment. These surface modifications were found to alter the interfacial strength between PVDF and metal electrodes and the crystal structure of the piezoelectric PVDF film.

Physical properties of nanocomposites prepared by in situ polymerization of high-density polyethylene on multiwalled carbon nanotubes.

In situ metallocence polymerization was used to prepare nanocomposites of multiwalled carbon nanotubes (MWCNT) and high density polyethylene (HDPE). This polymerization method consists of attaching a metallocene catalyst complex onto the surface of MWCNT followed by surface-initiated polymerization to generate polymer brushes on the surface. All the procedures of polymerization made progress with one-pot process.

Piezoelectric properties of poly(vinylidene fluoride) and carbon nanotube blends: beta-phase development.

In order to get poly(vinylidene fluoride) (PVDF) films containing high beta-phase content, multiwalled carbon nanotubes (MWCNTs) were blended with PVDF. For drawn samples, the content of piezoelectric beta-form crystal was increased with MWCNT addition due to the rapid crystallization rate offered by the nucleating action of MWCNT, but soon reached a plateau. Poling on the drawn samples helps additional beta-phase formation when the added MWCNT content was less than 0.

Physical properties of thin PVDF/MWNT (multi-walled carbon nanotube) composite films by melt blending.

Poly(vinylidene fluoride)(PVDF)/Multi-walled carbon nanotube (MWNT) composites were melt blended using internal mixer. The relationships between structures and physical properties of thin PVDF/MWNT composite films were studied. With increasing the content of MWNT, the size of spherulites in PVDF decreased.

Effect of temperature on the interfacial behavior of a polystyrene-b-poly(methyl methacrylate) diblock copolymer at the air/water interface.

Monolayers of a polystyrene-poly(methyl methacrylate) (PS-PMMA) diblock copolymer at the air-water interface were studied by measuring the surface pressure-area isotherms at several temperatures. Langmuir film balance experiments and atomic force microscopy showed that the diblock copolymer molecules formed surface micelles. In the plot of the surface pressure versus surface area per repeating unit, the monolayer changed from the gas phase to the liquid expanded phase at lower surface pressure for systems at low temperature compared to those at high temperature.

Crystallization of a polypropylene terpolymer made by a Ziegler-Natta catalyst: formation of gamma-phase.

The appearance of the gamma phase of a polypropylene-containing terpolymer prepared with a Ziegler-Natta catalyst was analyzed, and a novel strategy to make a polypropylene terpolymer which contains a high content of the gamma phase was experimentally sought. Wide-angle X-ray scattering and differential scanning calorimetry measurements have been conducted to investigate gamma-phase formation. Using a mixed flow of both elongational and shear components (a foaming process), we could introduce a lot of nuclei in the melt by flow-induced crystallization (FIC).