Influence of Polymer Architecture on the Structure of Complex Coacervate Core Micelles: AB + AC versus AB + C Systems.

Complex coacervate core micelles (C3Ms), formed through electrostatic interactions between oppositely charged block copolyelectrolytes, are effective delivery vehicles for hydrophilic biomacromolecules. This study investigates the impact of polymer architecture on the C3Ms structure by blending homopolyelectrolytes and diblock copolyelectrolytes as anionic counterparts for cationic diblock copolyelectrolytes. Our results show that the micellar structure, including core size, aggregation number, and corona characteristics, is precisely controlled by the fraction of homopolyelectrolytes.

Bridge-rich and loop-less hydrogel networks through suppressed micellization of multiblock polyelectrolytes.

Most triblock copolymer-based physical hydrogels form three-dimensional networks through micellar packing, and formation of polymer loops represents a topological defect that diminishes hydrogel elasticity. This effect can be mitigated by maximizing the fraction of elastically effective bridges in the hydrogel network. Herein, we report hydrogels constructed by complexing oppositely charged multiblock copolymers designed with a sequence pattern that maximizes the entropic and enthalpic penalty of micellization.

Ionic Strength-Dependent Structure of Complex Coacervate Core Micelles.

Salt concentration-dependent structure of complex coacervate core micelles (C3Ms), formed by polyether-based block copolyelectrolytes containing cationic ammonium (A) or anionic sulfonate (S) groups in aqueous media, is investigated by light scattering and small-angle X-ray/neutron scattering (SAX/NS). As the salt concentration increases, both a core radius () and an aggregation number () significantly decrease, but a corona thickness () is nearly unchanged. Larger salt concentrations can lower the interfacial tension between the coacervate cores and aqueous media, resulting in an increased interfacial area per chain and a more relaxed conformation of the core blocks.

Scaling Relationship of Complex Coacervate Core Micelles: Role of Core Block Stretching.

The scaling relationship of complex coacervate core micelles (C3Ms) has been investigated experimentally and theoretically. The C3Ms are formed by mixing two oppositely charged block copolyelectrolyte solutions (i.e.

Ionic group-dependent structure of complex coacervate hydrogels formed by ABA triblock copolymers.

This study investigates the nanostructure of complex coacervate core hydrogels (C3Gs) with varying compositions of cationic charged groups (, ammonium and guanidinium) using small-angle X-ray/neutron scattering (SAX/NS). C3Gs were prepared by stoichiometric mixing of two oppositely charged ABA triblock copolymers in aqueous solvents, in which A end-blocks were functionalized with either sulfonate groups or a mixture of ammonium and guanidinium groups. Comprehensive small-angle X-ray/neutron scattering (SAX/NS) analysis elucidated the dependence of C3Gs structures on the fraction of guanidinium groups in the cationic end-block () and salt concentration ().

Hydrolysis-Driven Viscoelastic Transition in Triblock Copolyether Hydrogels with Acetal Pendants.

While the hydrolytic cleavage of ester groups is widely exploited in degradable hydrogels, the scission in the midst of chain backbones can bring dramatic changes in the mechanical properties of the hydrogels. However, the predictive design of the mechanical profile of the hydrogels is a complex task, mainly due to the randomness of the location of chain scission. To overcome this challenge, we herein present degradable ABA triblock poly(ethylene oxide)-based hydrogels containing an A-block bearing acetal pendant, which provides systematically tunable mechano-temporal properties of the hydrogels.

Molecular Exchange Kinetics in Complex Coacervate Core Micelles: Role of Associative Interaction.

Molecular exchange dynamics between spherical complex coacervate core micelles (C3Ms) are documented using time-resolved small-angle neutron scattering measurements (TR-SANS), and the effects of salt concentration, type of charges, and core block polydispersity to the chain exchange are quantified. Isotopically labeled block copolyelectrolytes were prepared by postpolymerization modification of two nearly identical poly(ethylene oxide--allyl glycidyl ether), one with normal and the other with deuterated PEO blocks (i.e.

Conformational control of two-dimensional gold nanoparticle arrays in a confined geometry within a vesicular wall.

The two-dimensional (2D) assembly of gold nanoparticles (AuNPs) in a confined geometry is a rare phenomenon that has not been experimentally verified for complex systems. In this study, this process was investigated in detail using two types of block copolymers with hydrophobic and hydrophilic blocks and a series of AuNPs of three different sizes protected by hydrophobic ligands. In aqueous solutions, the selected block copolymers self-assembled into vesicular nanostructures with a hydrophobic domain in the wall, which functions as a confined geometrical space for hydrophobic AuNPs (i.

Antifreeze and Rheological Properties of Injectable Triblock Copolymer Hydrogels with Supramolecular Junctions.

ABC triblock copolymers composed of hydrophobic poly(ε-caprolactone) (PCL), zwitterionic poly(carboxybetaine methacrylate) midblock, and P(PEGMA-UPy ) containing supramolecular ureidopyrimidinone moieties, poly(ε-caprolactone-block-carboxybetaine methacrylate-block-[poly(ethylene glycol) methyl ether methacrylate-co-(α-methacryloyl-ω-(6-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl)ureido)hexylcarbamoyloxy)poly(ethylene glycol))]), are investigated to achieve multifunctional antifreeze hydrogels. The PCL and P(PEGMA-UPy ) blocks induce the formation of physical network with a hierarchical nanostructure comprising hydrophobic PCL cores and supramolecular junctions, respectively. The super-hydrophilic nature of polyzwitterion midblocks and the confinement effect of the supramolecular junctions enhance the antifreeze performance, where the majority of water molecules remains supercooled below sub-zero temperature.

Self-Assembly of 2D Gold Nanoparticle Superlattice in a Polymer Vesicle Layer Driven by Hydrophobic Interaction.

Self-assembly of gold nanoparticles (AuNPs) into highly ordered superstructures provides a promising route toward fabricating materials with new functionalities or enhanced physical properties. Although self-assembly of AuNPs has garnered significant research attention recently, a highly ordered superlattice of AuNPs under a low concentration in a confined geometry formed by nonfunctionalized materials has not been reported. Herein, we investigate the self-assembly of a 2D AuNPs superlattice in a polymer vesicle layer using hydrophobic interactions, which exhibits centered rectangular lattice symmetry.

Self-Assembly Behavior of Elastin-like Polypeptide Diblock Copolymers Containing a Charged Moiety.

Elastin-like polypeptides (ELPs) are stimulus-responsive protein-based biopolymers, and some ELP block copolymers can assemble into spherical nanoparticles with thermosensitivity. In this study, two different ELP diblock copolymers, each composed of a hydrophobic and a charged moiety, were synthesized, and the dependence of their physical properties on pH, temperature, and salt concentration was investigated. A series of analyses revealed that hydrophobic core micelles could be generated in response to a change in their surroundings and that micelles did not self-aggregate, a phenomenon due to the repulsive forces between like-charged molecules on the surface.

Metabolic engineering of Methylorubrum extorquens AM1 for poly (3-hydroxybutyrate-co-3-hydroxyvalerate) production using formate.

Formate is a promising environmentally friendly and sustainable feedstock synthesized from syngas or carbon dioxide. Methylorubrum extorquens is a type II methylotroph that can use formate as a carbon source. It accumulates polyhydroxyalkanoates (PHAs) inside the cell, mainly producing poly-3-hydroxybutyrate (PHB), a degradable biopolymer.

Facile Synthesis of Poly(ethylene oxide)-Based Self-Healable Dynamic Triblock Copolymer Hydrogels.

Stimuli-responsive smart hydrogels have garnered considerable interest for their potential in biomedical applications. While widely utilized, little is known about the rheological and mechanical properties of the hydrogels with respect to the type of cross-linker in a systematic manner. In this study, we present a facile synthetic route toward ABA triblock copolymer hydrogels based on poly(ethylene oxide) (PEO).

Structural Analysis of Bottlebrush Block Copolymer Micelles Using Small-Angle X-ray Scattering.

We present structural analysis of spherical diblock copolymer micelles where core blocks have bottlebrush architecture. The dependence of the core radius () and the corona thickness () on the core block length () is investigated using small-angle X-ray scattering (SAXS) and discussed in terms of the stiffness of a core-forming polymer posed by its long fluoroalkyl side chains. The conformation of the core block is strongly stretched, and the measured exponents α and β from power-law correlations, ∼ and ∼ , respectively, are greater than those from any scaling predictions for block copolymer micelles with a flexible, linear core-block.

Normal stress difference-driven particle focusing in nanoparticle colloidal dispersion.

Colloidal dispersion has elastic properties due to Brownian relaxation process. However, experimental evidence for the elastic properties, characterized with normal stress differences, is elusive in shearing colloidal dispersion, particularly at low Péclet numbers ( < 1). Here, we report that single micrometer-sized polystyrene (PS) beads, suspended in silica nanoparticle dispersion (8 nm radius; 22%, v/v), laterally migrate and form a tightly focused stream by the normal stress differences, generated in pressure-driven microtube flow at low .

Effect of Ionic Group on the Complex Coacervate Core Micelle Structure.

Pairs of ionic group dependence of the structure of a complex coacervate core micelle (C3M) in an aqueous solution was investigated using DLS, cryo-TEM, and SANS with a contrast matching technique and a detailed model analysis. Block copolyelectrolytes were prepared by introducing an ionic group (i.e.

Molecular Tailoring of Poly(styrene--methyl methacrylate) Block Copolymer Toward Perpendicularly Oriented Nanodomains with Sub-10 nm Features.

We demonstrate a novel approach for fabricating vertically orientated, sub-10 nm, block copolymer (BCP) nanodomains on a substrate via molecular tailoring of poly(styrene--methyl methacrylate) (PS--PMMA) BCP, one of the most widely used BCPs for nanopatterning. The idea is to incorporate a short middle block of self-attracting poly(methacrylic acid) (PMAA) between the PS and PMMA blocks, where the PMAA middle block promotes phase separation between PS and PMMA, while maintaining the domain orientation perpendicular to the substrate. The designed PS--PMAA--PMMA triblock copolymers, which were synthesized via well-controlled anionic polymerization, exhibited order-disorder transition temperatures higher than that of pristine PS--PMMA BCPs, indicating the promotion of phase separation by the middle PMAA block.

Tunable Photonic Band Gap of PS-b-P2VP Lamellar Film Using Metal Ions and pH Gradation.

Optical properties of photonic crystal film were investigated by tuning photonic band gap (PBG). The lamellar-forming photonic films were prepared by nearly symmetric poly(styrene-b-2-vinyl pyridine) (PS-b-P2VP) block copolymers. Molecular weight of PS block and P2VP block is 52 kg/mol, and 57 kg/mol, respectively.

Nanoscale Phase Behavior of Mixed Polymer Ligands on a Gold Nanoparticle Surface.

The phase behavior of mixed polymer ligands anchored on Au nanoparticle surfaces was investigated using small-angle neutron scattering (SANS). An equimolar mixture of deuterated polystyrene (PS) and normal poly(methyl methacrylate) (PMMA) was attached to Au nanoparticles, and the polymer-grafted nanoparticles were characterized in an isotopic toluene mixture, a good solvent for both homopolymers. Poly(deuterated styrene--methyl methacrylate) (P(S--MMA)) attached to the Au nanoparticles was also characterized as a control case.

Small angle neutron scattering study of complex coacervate micelles and hydrogels formed from ionic diblock and triblock copolymers.

A complex coacervate is a fluid phase that results from the electrostatic interactions between two oppositely charged macromolecules. The nature of the coacervate core structure of hydrogels and micelles formed from complexation between pairs of diblock or triblock copolymers containing oppositely charged end-blocks as a function of polymer and salt concentration was investigated. Both ABA triblock copolymers of poly[(allyl glycidyl ether)-b-(ethylene oxide)-b-(allyl glycidyl ether)] and analogous poly[(allyl glycidyl ether)-b-(ethylene oxide)] diblock copolymers, which were synthesized to be nearly one-half of the symmetrical triblock copolymers, were studied.

Two-dimensional GIWAXS reveals a transient crystal phase in solution-processed thermally converted tetrabenzoporphyrin.

Thermally convertible organic materials are useful for the fabrication of multilayered thin film electronic devices such as solar cells. However, substantial changes in molecular ordering can occur during the conversion process that may lead to multiple polymorphs having differing electronic properties. In-situ grazing incidence wide-angle X-ray scattering with 2-D detection (2-D GIWAXS) was used to study the changes in the thin film crystal structure, texture, and crystallite size of a convertible small-molecule electron donor, tetrabenzoporphyrin (BP), during thermal conversion from the precursor bicycloporphyrin (CP) and the resulting crystal-crystal phase transition from a metastable phase (phase I) to a stable phase (phase II).

Nanoporous bicontinuous structures via addition of thermally-stable amphiphilic nanoparticles within block copolymer templates.

Herein, we fabricated the bicontinuous structures from nanocomposites of poly(styrene-b-methyl methacrylate) (PS-b-PMMA) block copolymer and the shell-cross-linked, thermally stable gold nanoparticles (Au NPs). The surface property of Au NPs was controlled with ligands containing various compositions of PS and PMMA so that the resulting Au NPs were selective to PS or PMMA block or nonselective (i.e.

Crystalline polymorphs of [6,6]-phenyl-C61-butyric acid n-butyl ester (PCBNB).

The thermotropic behavior of [6,6]-phenyl-C(61)-butyric acid n-butyl ester (PCBNB) in powder and thin film form was investigated using X-ray diffraction and transmission electron microscopy. Upon heating PCBNB powder above its glass-transition temperature, an amorphous-to-crystalline transition (i.e.