Validation of the analytical methodology used in obtaining the oral bioavailability of organic target pollutants in atmospheric particulate matter (PM) applying an in-vitro method.

In recent years, scientists have started evaluating the portion of PM-bound pollutants that may be liberated (bioaccessible fraction) in human fluids and spread through the digestive system ultimately entering systemic circulation (known as the bioavailable fraction). In the current research, an analytical procedure was validated and applied to characterize the oral bioavailable fraction of PM samples. The approach encompassed the determination of 49 organic contaminants.

Predicted concentrations of antineoplastic drugs in the aquatic environment: The case of Ría de Vigo (NW, Spain).

The European Medicines Agency (EMA) mandates Environmental Risk Assessments (ERAs) since 2006 to determine potential risks of new marketed medicines. Drugs with a Predicted Environmental Concentration (PEC) in inland surface waters exceeding 0.01 μg L require further environmental risk assessment.

Oxidative potential of the inhalation bioaccessible fraction of PM and bioaccessible concentrations of polycyclic aromatic hydrocarbons and metal(oid)s in PM.

Atmospheric particulate matter (PM) has been related to numerous adverse health effects in humans. Nowadays, it is believed that one of the possible mechanisms of toxicity could be the oxidative stress, which involves the development of reactive oxygen species (ROS). Different assays have been proposed to characterize oxidative stress, such as dithiothreitol (DTT) and ascorbic acid (AA) acellular assays (OP and OP), as a metric more relevant than PM mass measurement for PM toxicity.

A green approach for the automatic quantitative analysis of additives in plastic samples using in-tube extraction dynamic headspace sampling technique coupled to GC-MS/MS.

Background: Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples.

Bioaccumulation of trace metals in the plastisphere: Awareness of environmental risk from a European perspective.

The term "Plastisphere" refers to the biofilm layer naturally formed by microorganisms attaching to plastic surfaces. This layer possesses the capability to adsorb persistent organic and inorganic pollutants, particularly trace metals, which are the focus of this research study. Immersion experiments were concurrently conducted in five locations spanning four European countries (France, Ireland, Spain, and Italy) utilising eight distinct polymers.

Development of a dispersive liquid-liquid microextraction method for the determination of plastic additives in seawater.

A method using dispersive liquid-liquid microextraction (DLLME) prior to high performance liquid chromatography-diode array detection (HPLC-DAD) was developed to determine seven additives from the plastics industry (butylated hydroxytoluene, diisodecyl phthalate, irgafos 168, lawsone, quercetin, triclosan and vitamin E) in seawater samples. These compounds can reach seawater due to direct discharge from wastewater treatment plants and leaching from plastics and microplastics. The extraction was performed using 25 mL of seawater, 500 μL of 1-octanol (extraction solvent) and a stirring step instead of dispersive solvent.

A reliable method to determine airborne microplastics using quantum cascade laser infrared spectrometry.

The number of studies dealing with airborne microplastics (MPs) is increasing but sampling and sample treatment are not standardized, yet. Here, a fast and reliable method to characterize MPs is presented. It involves the study of two passive sampling devices to collect atmospheric bulk deposition (wet and dry deposition) and three digestion methods (two alkaline-oxidative and an oxidative) to treat the samples.

A multi-residue method for the analysis of organic pollutants released from atmospheric PM in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation.

Background: In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field.

A nationwide monitoring of atmospheric microplastic deposition.

Plastic production continues to increase every year, yet it is widely acknowledged that a significant portion of this material ends up in ecosystems as microplastics (MPs). Among all the environmental compartments affected by MPs, the atmosphere remains the least well-known. Here, we conducted a one-year simultaneous monitoring of atmospheric MPs deposition in ten urban areas, each with different population sizes, economic activities, and climates.

Organotin compounds in seafood by ultrasonic assisted extraction and gas chromatography-triple quadrupole tandem mass spectrometry.

Although restricting environmental quality values for organotin compounds (OTs) are set by Directive 2013/39/EU of the European Parliament, marine environment remains being affected due to maritime circulation at global scale. Fish and seafood accumulate OTs, making fish and seafood consumption the main source of OTs in humans. Because of the fish and seafood matrices complexity and the required low limits of detection, a robust and fast procedure for the quantification of OTs in fish and seafood, using ultrasound-assisted extraction and gas chromatography-tandem mass spectrometry, was validated and applied.

Microplastics in surface water of the Bay of Asunción, Paraguay.

This study identified and quantified microplastics in the Bay of Asunción, Paraguay, and its main tributaries. Surface water samples were sieved in duplicate at six locations using stainless-steel sieves (0.3-4.

Occurrence and size distribution study of microplastics in household water from different cities in continental Spain and the Canary Islands.

The purpose of this study was to investigate the occurrence of microplastics (MPs) in drinking water in Spain by comparing tap water from different locations using common sampling and identification procedures. We sampled tap water from 24 points in 8 different locations from continental Spain and the Canary Islands by means of 25 μm opening size steel filters coupled to household connections. All particles were measured and spectroscopically characterized including not only MPs but also particles consisting of natural materials with evidence of industrial processing, such as dyed natural fibres, referred insofar as artificial particles (APs).

Source apportionment of PM and health risk assessment related in a narrow tropical valley. Study case: Metropolitan area of Aburrá Valley (Colombia).

This study investigates spatio-temporal variations of PM mass concentrations and associated metal(oid)s, δC carbon isotope ratios, polycyclic aromatic hydrocarbons (PAHs), total organic carbon (TOC) and equivalent black carbon (eBC) concentrations over a half year period (from March 2017 to October 2017) in two residential areas of Medellín (MED-1 and MED-2) and Itagüí municipality (ITA-1 and ITA-2) at a tropical narrow valley (Aburrá Valley, Colombia), where few data are available. A total of 104 samples were analysed by using validated analytical methodologies, providing valuable data for PM chemical characterisation. Metal(oid)s concentrations were measured by inductively coupled plasma mass spectrometry (ICP-MS) after acid digestion, and PAHs concentrations were measured by Gas Chromatography-Mass Spectrometry (GC-MS) after Pressurised Hot Water Extraction (PHWE) and Membrane Assisted Solvent Extraction (MASE).

Filtration of biopolymer PHB particles loaded with synthetic musks does not cause significant bioaccumulation in marine mussels.

The role of the biopolymer polyhydroxybutyrate (PHB, <250 µm) as a vehicle of a synthetic musks mixture (celestolide, galaxolide, tonalide, musk xylene, musk moskene and musk ketone) to Mytilus galloprovincialis was investigated. For 30 days, virgin PHB, virgin PHB+musks (6.82 µg g-1) and weathered PHB+musks, were daily spiked into tanks containing mussels, followed by a 10-day depuration period.

Mixed-mode chromatography of mixed functionalized analytes as the homologues of benzalkonium chloride. Application to pharmaceutical formulations.

In this work, a retention behavior based on mixed-mode reversed-phase (RP)/hydrophilic interaction liquid chromatography (HILIC) was observed for benzalkonium chloride (BAK) using a core-shell column functionalized with biphenyl groups. Although in the literature, the U-shaped retention was reported for polar compounds in mixed functionalized phases, in the present work, the behavior was dependent upon the chemical structure of the analyte with mixed functionality (ammonium group, a benzyl group and an alkyl chain) and on the high selectivity of the chromatographic column. The bimodal retention was observed for the four BAK homologues using a content of acetonitrile from 65 to 95% in the mobile phase.

In-vitro inhalation bioavailability estimation of Metal(oid)s in atmospheric particulate matter (PM) using simulated alveolar lysosomal fluid: A dialyzability approach.

A novel in-vitro method, by using synthetic body fluids, human physiological conditions and a simulated air-blood barrier (by using a dialysis membrane) has been developed and applied to assess in-vitro inhalation bioavailability of metal(oid)s associated to particulate matter (PM) samples collected from an industrial site of the Northwest of Spain. A validated analytical methodology based on inductively coupled plasma mass spectrometry (ICP-MS) was used to analyse metal(oid)s concentrations in bioavailable fractions. This approach would be a more realistic human health risk assessment since considering processes that occur in human body in contrast the overestimation derived from current models (which consider environmental concentrations).

Development of an analytical procedure to analyze microplastics in edible macroalgae using an enzymatic-oxidative digestion.

Besides being food and a refuge to marine species, macroalgae are a powerful and renewable economic resource. However, they may introduce microplastics (MPs) in the trophic chain. We developed a reliable analytical method to characterize and quantify MPs in common and edible macroalgae.

Multi-class organic pollutants in atmospheric particulate matter (PM) from a Southwestern Europe industrial area: Levels, sources and human health risk.

The occurrence of 50 multi-class pollutants comprising 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 12 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols was studied in atmospheric particulate matter (PM) samples collected at an industrial area focused on automotive manufacturing located at the Southwestern Atlantic European region (Vigo city, Spain) during 1-year period. Among all quantitated pollutants in PM samples, bisphenol A (BPA) was the most predominant with an average concentration of 6180 pg m, followed by PAHs comprising benzo(b+j)fluoranthene (BbF + BjF) and benzo(g,h,i)perylene (BghiP), accounting for 546 pg m and 413 pg m respectively. In addition, two OPFRs concerning tris(chloropropyl) phosphate (TCPP) and triphenyl phosphine oxide (TPPO) were the next following the concentration order, accounting for 411 pg m and 367 pg m respectively; being butyl benzyl phthalate (BBP) the most profuse PAE (56.

Adsorption of pesticides and personal care products on pristine and weathered microplastics in the marine environment. Comparison between bio-based and conventional plastics.

The hydrophobicity of persistent organic pollutants (POPs) makes them adsorb on microplastics in the marine environment, affecting their distribution, persistence, or their transfer to the trophic chain. Fragrances and non-polar pesticides can be adsorbed by microplastics in the marine environment because of their physico-chemical characteristics. In this work, the adsorption of two pesticides (α-endosulfan and chlorpyrifos) and 6 musk fragrances (musk xylene, musk ketone, musk moskene, galaxolide, tonalide, and celestolide) on polyamide (PA6) (a petroleum based polymer) and on polyhydroxybutyrate (PHB) (biopolymer) in seawater was studied, considering also the effect of water temperature and plastic weathering.

Improved methodology for microplastic extraction from gastrointestinal tracts of fat fish species.

Potassium hydroxide (KOH) digestion protocols are currently applied to separate microplastics from biological samples, allowing efficient digestion with minor degradation of polymers in a time- and cost-effective way. For biota samples with high-fat content, KOH reacts with triglycerides generating an overlying soap layer, making difficult the digestion and solubilization and subsequent microplastics extraction. Here we studied the addition of Tween-20 in different concentrations to evaluate the effect on the soap layer of post-digested samples.

Inhalation bioaccessibility of multi-class organic pollutants associated to atmospheric PM: Correlation with PM properties and health risk assessment.

Inhalation exposure to fine particulate matter (PM) represents a global concern due to the adverse effects in human health. In the last years, scientific community has been adopted the assessment of the PM-bound pollutant fraction that could be released (bioaccessible fraction) in simulated lung fluids (SLFs) to achieve a better understanding of PM risk assessment and toxicological studies. Thus, bioaccessibility of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols in PM samples was evaluated.

A reliable method for the isolation and characterization of microplastics in fish gastrointestinal tracts using an infrared tunable quantum cascade laser system.

Societal and environmental concern due to frequent reports of microplastics in fish stomachs raised as they may accumulate along the trophic chain. The request for analysing microplastics in fish stresses two major analytical issues: sample treatment and final characterization. The, so far, workhorse for chemical characterization is infrared spectroscopy which is time-consuming.

Micro and Nano-Plastics in the Environment: Research Priorities for the Near Future.

Plastic litter dispersed in the different environmental compartments represents one of the most concerning problems associated with human activities. Specifically, plastic particles in the micro and nano size scale are ubiquitous and represent a threat to human health and the environment. In the last few decades, a huge amount of research has been devoted to evaluate several aspects of micro/nano-plastic contamination: origin and emissions, presence in different compartments, environmental fate, effects on human health and the environment, transfer in the food web and the role of associated chemicals and microorganisms.