Electrochemical sensing of vitamin B (pyridoxine) by adapted carbon paste electrode.

The recent investigation targets to use adapted carbon paste (CP) with copper nanoparticles (CuNs) operating in a phosphate buffer (PBS) medium with a pH range of 5.0-8.0, to synthesize a novel, susceptible, and simple electrochemical sensor for the detection of one of the most important drugs, vitamin B.

Reduction of organic contaminants from industrial effluent using the advanced oxidation process, chemical coagulation, and green nanotechnology.

Municipal wastewater treatment systems use the chemical oxygen demand test (COD) to identify organic contaminants in industrial effluents that impede treatment due to their high concentration. This study reduced the COD levels in tannery wastewater using a multistage treatment process that included Fenton oxidation, chemical coagulation, and nanotechnology based on a synthetic soluble COD standard solution. At an acidic pH of 5, Fenton oxidation reduces the COD concentration by approximately 79%.

Use of a natural rock material as a precursor to inhibit corrosion of Ti alloy in an aggressive phosphoric acid medium.

The mechanism of interaction between magnesite mineral and phosphoric acid (0.001-0.5 M) in addition to the determination of the protective properties for Ti alloy (working electrode) in phosphoric acid both with and without an inhibitor have been investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements.

A novel environmental nano-catalyst of zeolite amended with carbon nanotube/silver nanoparticles decorated carbon paste electrode for electro-oxidation of propylene glycol.

A novel environmental nano-catalyst based on zeolite (ZE) adjusted with carbon nanotube/silver nanoparticles (Ag/CNT) ornamented carbon paste electrode (CPE) is used for electrochemical oxidation of propylene glycol (PG) in 0.5 M HSO solution. The techniques like cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) are utilized to achieve the catalytic activity performance.