Effect of Multiply Twinned Ag Nanoparticles on Photocatalytic Properties of TiO Nanosheets and TiO Nanostructured Thin Films.

Ag-decorated TiO nanostructured materials are promising photocatalysts. We used non-standard cryo-lyophilization and ArF laser ablation methods to produce TiO nanosheets and TiO nanostructured thin films decorated with Ag nanoparticles. Both methods have a common advantage in that they provide a single multiply twinned Ag characterized by {111} twin boundaries.

The Key Role of Tin (Sn) in Microstructure and Mechanical Properties of TiSnC (MAX) Thin Nanocrystalline Films and Powdered Polycrystalline Samples.

Layered ternary TiSnC carbides have attracted significant attention because of their advantage as a M2AX phase to bridge the gap between properties of metals and ceramics. In this study, TiSnC materials were synthesized by two different methods-an unconventional low-energy ion facility (LEIF) based on Ar ion beam sputtering of the Ti, Sn, and C targets and sintering of a compressed mixture consisting of Ti, Sn, and C elemental powders up to 1250 °C. The TiSnC nanocrystalline thin films obtained by LEIF were irradiated by Ar ions with an energy of 30 keV to the fluence of 1.

Surface Properties of 1DTiO Microrods Modified with Copper (Cu) and Nanocavities.

This work deals with Cu-modified 1DTiO microrods (MRs) and their surface properties. The pristine lyophilized precursor Cu_1DTiO, prepared by an environmentally friendly cryo-lyophilization method, was further annealed in the temperature interval from 500 to 950 °C. The microstructure of all samples was characterized by electron microscopy (SEM/EDS and HRTEM/SAED), X-ray powder diffraction (XRD), infrared spectroscopy, simultaneous DTA/TGA thermoanalytical measurement, and mass spectroscopy (MS).

The relationship between microstructure and photocatalytic behavior in lanthanum-modified 2D TiO nanosheets upon annealing of a freeze-cast precursor.

Titanium dioxide modified with 3 wt% La was prepared a green freeze-casting method, and its photocatalytic activity was tested in terms of its ability to degrade 4-chlorophenol (4-CP) and remove total organic carbon (TOC). Under annealing conditions, the freeze-cast precursor was transformed into an La-modified anatase with a well-defined 2D TiO nanosheet morphology. Rietveld refinement of the X-ray diffraction patterns confirmed the substitutional nature of the La cation that induced local structural variations and involved subtle ion displacement in the TiO lattice due to the ionic size effect.

Synthesis of strongly fluorescent graphene quantum dots by cage-opening buckminsterfullerene.

Graphene quantum dots is a class of graphene nanomaterials with exceptional luminescence properties. Precise dimension control of graphene quantum dots produced by chemical synthesis methods is currently difficult to achieve and usually provides a range of sizes from 3 to 25 nm. In this work, fullerene C60 is used as starting material, due to its well-defined dimension, to produce very small graphene quantum dots (∼2-3 nm).

TiO2-graphene oxide nanocomposite as advanced photocatalytic materials.

Background: Graphene oxide composites with photocatalysts may exhibit better properties than pure photocatalysts via improvement of their textural and electronic properties.

Results: TiO2-Graphene Oxide (TiO2 - GO) nanocomposite was prepared by thermal hydrolysis of suspension with graphene oxide (GO) nanosheets and titania peroxo-complex. The characterization of graphene oxide nanosheets was provided by using an atomic force microscope and Raman spectroscopy.

Brightly luminescent organically capped silicon nanocrystals fabricated at room temperature and atmospheric pressure.

Silicon nanocrystals are an extensively studied light-emitting material due to their inherent biocompatibility and compatibility with silicon-based technology. Although they might seem to fall behind their rival, namely, direct band gap based semiconductor nanocrystals, when it comes to the emission of light, room for improvement still lies in the exploitation of various surface passivations. In this paper, we report on an original way, taking place at room temperature and ambient pressure, to replace the silicon oxide shell of luminescent Si nanocrystals with capping involving organic residues.

Photocatalytic activity of boron-modified titania under UV and visible-light illumination.

Nanosized boron(III) oxide-doped titania was prepared by homogeneous hydrolysis of titanium oxo-sulfate with urea in aqueous solutions in the presence of amorphous boron. The prepared samples were annealing at 700 degrees C. The structure of as-prepared samples was characterized by X-ray powder diffraction (XRD) and selected area electron diffraction (SAED) and surface area (BET) and porosity determination (BJH).

Zinc oxide prepared by homogeneous hydrolysis with thioacetamide, its destruction of warfare agents, and photocatalytic activity.

Zinc sulfide (ZnS) nanoparticles were prepared by homogeneous hydrolysis of zinc sulfate and thioacetamide (TAA) at 80 degrees C. After annealing at a temperature above 400 degrees C in oxygen atmosphere, zinc oxide (ZnO) nanoparticles were obtained. The ZnS and ZnO nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and Brunauer-Emmett-Teller (BET)/Barrett-Joyner-Halenda (BJH) methods were used for surface area and porosity determination.

Electrolytic processes in various degrees of dispersion.

While following voltammetric behavior of ultrafine metallic powders, we realized that the results obtained with six metals (Al, Fe, Ni, Cu, Mo, and W) were providing us with material for treating the connection between electroactivity and the state of dispersion of matter. The electroactive species were metallic oxides formed spontaneously on surfaces of the metallic powder particles, and we could follow their electrochemical reactivity in the states of coarse and fine suspensions, colloids, and true solutions. Each state of dispersion can be characterized by a distinctive form of electroactivity, which we illustrated by experimental results with all six metals.

Analysis of earthy pigments in grounds of Baroque paintings.

Sixteen samples of orange-red and yellow Fe-oxide earthy pigments mainly from bole grounds of Baroque paintings were studied by elemental and phase analysis and voltammetry. Fe, K, and Ti content were found to be suitable for further classification of those earthy pigments. According to the chemical and phase composition the yellow grounds were natural yellow ochres formed by intense chemical weathering in a moderate climate.