Surfactant Micelle-Driven High-Efficiency and High-Resolution Length Separation of Carbon Nanotubes for Electronic Applications.

High-efficiency extraction of long single-wall carbon nanotubes (SWCNTs) with excellent optoelectronic properties from SWCNT solution is critical for enabling their application in high-performance optoelectronic devices. Here, a straightforward and high-efficiency method is reported for length separation of SWCNTs by modulating the concentrations of binary surfactants. The results demonstrate that long SWCNTs can spontaneously precipitate for binary-surfactant but not for single-surfactant systems.

Preparing high-concentration individualized carbon nanotubes for industrial separation of multiple single-chirality species.

Industrial production of single-chirality carbon nanotubes is critical for their applications in high-speed and low-power nanoelectronic devices, but both their growth and separation have been major challenges. Here, we report a method for industrial separation of single-chirality carbon nanotubes from a variety of raw materials with gel chromatography by increasing the concentration of carbon nanotube solution. The high-concentration individualized carbon nanotube solution is prepared by ultrasonic dispersion followed by centrifugation and ultrasonic redispersion.

Length-Dependent Enantioselectivity of Carbon Nanotubes by Gel Chromatography.

High-purity enantiomer separation of chiral single-wall carbon nanotubes (SWCNTs) remains a challenge compared with electrical type and chirality separations due to the limited selectivities for both chirality and handedness, which is important for an exploration of their properties and practical applications. Here, we performed length fractionation for enantiomer-purified SWCNTs and found a phenomenon in which the enantioselectivities were higher for longer nanotubes than for shorter nanotubes due to length-dependent interactions with the gel medium, which provided an effective strategy of controlling nanotube length for high-purity enantiomer separation. Furthermore, we employed a gentler pulsed ultrasonication instead of traditional vigorous ultrasonication for preparation of a low-defect long SWCNT dispersion and achieved the enantiomer separation of single-chirality (6,5) SWCNTs with an ultrahigh enantiomeric purity of up to 98%, which was determined by using the linear relationship between the normalized circular dichroism intensity and the enantiomeric purity.

A High-Temperature Accelerometer with Excellent Performance Based on the Improved Graphene Aerogel.

A high-temperature accelerometer plays an important role for ensuring normal operation of equipment in aerospace, such as monitoring and identifying abnormal vibrations of aircraft engines. Phase transitions of piezoelectric crystals, mechanical failure and current leakage of piezoresistive/capacitive materials are the prominent inherent limitations of present high-temperature accelerometers working continuously above 973 K. With the rapid development of aerospace, it is a great challenge to develop a new type of vibration sensor to meet the crucial demands at high temperature.

Chirality-dependent electrical transport properties of carbon nanotubes obtained by experimental measurement.

Establishing the relationship between the electrical transport properties of single-wall carbon nanotubes (SWCNTs) and their structures is critical for the design of high-performance SWCNT-based electronic and optoelectronic devices. Here, we systematically investigated the effect of the chiral structures of SWCNTs on their electrical transport properties by measuring the performance of thin-film transistors constructed by eleven distinct (n, m) single-chirality SWCNT films. The results show that, even for SWCNTs with the same diameters but different chiral angles, the difference in the on-state current or carrier mobility could reach an order of magnitude.

Simultaneously enhanced tenacity, rupture work, and thermal conductivity of carbon nanotube fibers by raising effective tube portion.

Although individual carbon nanotubes (CNTs) are superior to polymer chains, the mechanical and thermal properties of CNT fibers (CNTFs) remain inferior to synthetic fibers because of the failure of embedding CNTs effectively in superstructures. Conventional techniques resulted in a mild improvement of target properties while degrading others. Here, a double-drawing technique is developed to rearrange the constituent CNTs.

Recent Advances in Structure Separation of Single-Wall Carbon Nanotubes and Their Application in Optics, Electronics, and Optoelectronics.

Structural control of single-wall carbon nanotubes (SWCNTs) with uniform properties is critical not only for their property modulation and functional design but also for applications in electronics, optics, and optoelectronics. To achieve this goal, various separation techniques have been developed in the past 20 years through which separation of high-purity semiconducting/metallic SWCNTs, single-chirality species, and even their enantiomers have been achieved. This progress has promoted the property modulation of SWCNTs and the development of SWCNT-based optoelectronic devices.

Integrated, Highly Flexible, and Tailorable Thermoelectric Type Temperature Detectors Based on a Continuous Carbon Nanotube Fiber.

As possible alternatives to traditional thermoelectric (TE) materials, carbon nanomaterials and their hybrid materials have great potential in the future application of flexible and lightweight temperature detection. In this work, an integrated, highly flexible, and tailorable TE temperature detector with high performance has been fabricated based on a continuous single-walled carbon nanotube (SWCNT) fiber. The detector consists of more than one pairs of thermocouples composed of p-type SWCNT fiber and n-type SWCNT hybrid fiber in situ doped by polyethylenimine.

Submilligram-scale separation of near-zigzag single-chirality carbon nanotubes by temperature controlling a binary surfactant system.

Mass production of zigzag and near-zigzag single-wall carbon nanotubes (SWCNTs), whether by growth or separation, remains a challenge, which hinders the disclosure of their previously unknown property and practical applications. Here, we report a method to separate SWCNTs by chiral angle through temperature control of a binary surfactant system of sodium cholate (SC) and SDS in gel chromatography. Eleven types of single-chirality SWCNT species with chiral angle less than 20° were efficiently separated including multiple zigzag and near-zigzag species.

High-precision solid catalysts for investigation of carbon nanotube synthesis and structure.

The direct growth of single-walled carbon nanotubes (SWCNTs) with narrow chiral distribution remains elusive despite substantial benefits in properties and applications. Nanoparticle catalysts are vital for SWCNT and more generally nanomaterial synthesis, but understanding their effect is limited. Solid catalysts show promise in achieving chirality-controlled growth, but poor size control and synthesis efficiency hampers advancement.

Quantitative analysis of the effect of reabsorption on the Raman spectroscopy of distinct (, ) carbon nanotubes.

We quantitatively analyze the effect of reabsorption on the Raman spectroscopy of (10, 3) and (8, 3) single-chirality single-wall carbon nanotube (SWCNT) solutions by varying the detection depth in confocal micro-Raman measurements and SWCNT concentration the in sample solution. The increase of the detection depth and concentration of SWCNTs enhances the reabsorption effect and decreases the intensities of the Raman features. More importantly, reabsorption exhibits different effects on different Raman features such as the radial breathing mode (RBM) and G+ band, strongly depending on the resonance degree of the scattered light energy and the interband transition of SWCNTs.

Transparent and Freestanding Single-Walled Carbon Nanotube Films Synthesized Directly and Continuously via a Blown Aerosol Technique.

Single-walled carbon nanotube (SWCNT) films are promising materials as flexible transparent conductive films (TCFs). Here, inspired by the extrusion blown plastic film technique and the SWCNT synthesis approach by floating catalyst chemical vapor deposition (FCCVD), a novel blown aerosol chemical vapor deposition (BACVD) method is reported to directly and continuously produce freestanding SWCNT TCFs at several hundred meters per hour. The synthesis mechanism, involving blowing a stable aerosol bubble and transforming the bubble into an aerogel, is investigated, and a general phase diagram is established for this method.

All-Carbon Pressure Sensors with High Performance and Excellent Chemical Resistance.

An all-carbon pressure sensor is designed and fabricated based on reduced graphene oxide (rGO) nanomaterials. By sandwiching one layer of superelastic rGO aerogel between two freestanding high-conductive rGO thin papers, the sensor works based on the contact resistance at the aerogel-paper interfaces, getting rid of the alien materials such as polymers and metals adopted in traditional sensors. Without the limitation of alien materials, the all-carbon sensors demonstrate an ultrawide detecting range (0.

Designing hybrid gate dielectric for fully printing high-performance carbon nanotube thin film transistors.

The electrical characteristics of carbon nanotube (CNT) thin-film transistors (TFTs) strongly depend on the properties of the gate dielectric that is in direct contact with the semiconducting CNT channel materials. Here, we systematically investigated the dielectric effects on the electrical characteristics of fully printed semiconducting CNT-TFTs by introducing the organic dielectrics of poly(methyl methacrylate) (PMMA) and octadecyltrichlorosilane (OTS) to modify SiO dielectric. The results showed that the organic-modified SiO dielectric formed a favorable interface for the efficient charge transport in s-SWCNT-TFTs.

High-performance and compact-designed flexible thermoelectric modules enabled by a reticulate carbon nanotube architecture.

It is a great challenge to substantially improve the practical performance of flexible thermoelectric modules due to the absence of air-stable n-type thermoelectric materials with high-power factor. Here an excellent flexible n-type thermoelectric film is developed, which can be conveniently and rapidly prepared based on the as-grown carbon nanotube continuous networks with high conductivity. The optimum n-type film exhibits ultrahigh power factor of ∼1,500 μW m K and outstanding stability in air without encapsulation.

Carbon nanotube thin film transistors fabricated by an etching based manufacturing compatible process.

Carbon nanotube thin film transistors (CNT-TFTs) have been regarded as strong competitors to currently commercialized TFT technologies. Though much progress has been achieved recently, CNT-TFT research is still in the stage of laboratory research. One critical challenge for commercializing CNT-TFT technology is that the commonly used device fabrication method is a lift-off based process, which is not suitable for mass production.

Spin-exciton interaction and related micro-photoluminescence spectra of ZnSe:Mn DMS nanoribbon.

For their spintronic applications the magnetic and optical properties of diluted magnetic semiconductors (DMS) have been studied widely. However, the exact relationships between the magnetic interactions and optical emission behaviors in DMS are not well understood yet due to their complicated microstructural and compositional characters from different growth and preparation techniques. Manganese (Mn) doped ZnSe nanoribbons with high quality were obtained by using the chemical vapor deposition (CVD) method.

Hydro-actuation of hybrid carbon nanotube yarn muscles.

Hybrid hydro-responsive actuators are developed by infiltrating carbon nanotube yarns using poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate). These actuators demonstrate impressive rotation and contraction in response to water due to volumetric expansion of the helical arrangement of carbon nanotubes. The total torsional stroke is 3720 revolutions per m and the simultaneously generated contractive strain reaches 24% at a paddle-to-yarn mass ratio of 350.

Ultrahigh-Power-Factor Carbon Nanotubes and an Ingenious Strategy for Thermoelectric Performance Evaluation.

An ingenious strategy is put forward to evaluate accurately the thermoelectric performance of carbon nanotube (CNT) thin films, including thermal conductivity, electrical conductivity, and Seebeck coefficient in the same direction. The results reveal that the as-prepared CNT interconnected films and CNT fibers possess enormous potential of thermoelectric applications because of their ultrahigh power factors.

Ethanol-assisted gel chromatography for single-chirality separation of carbon nanotubes.

Surfactants or polymers are usually used for the liquid processing of carbon nanotubes for their structure separation. However, they are difficult to remove after separation, affecting the intrinsic properties and applications of the separated species. Here, we report an ethanol-assisted gel chromatography for the chirality separation of single-walled carbon nanotubes (SWCNTs), in which ethanol is employed to finely tune the density/coverage of sodium dodecyl sulfate (SDS) on nanotubes, and thus the interactions between SWCNTs and an allyl dextran-based gel.

Highly compressible and all-solid-state supercapacitors based on nanostructured composite sponge.

Based on polyaniline-single-walled carbon nanotubes -sponge electrodes, highly compressible all-solid-state supercapacitors are prepared with an integrated configuration using a poly(vinyl alcohol) (PVA)/H2 SO4 gel as the electrolyte. The unique configuration enables the resultant supercapacitors to be compressed as an integrated unit arbitrarily during 60% compressible strain. Furthermore, the performance of the resultant supercapacitors is nearly unchanged even under 60% compressible strain.

Biaxially stretchable supercapacitors based on the buckled hybrid fiber electrode array.

In order to meet the growing need for smart bionic devices and epidermal electronic systems, biaxial stretchability is essential for energy storage units. Based on porous single-walled carbon nanotube/poly(3,4-ethylenedioxythiophene) (SWCNT/PEDOT) hybrid fiber, we designed and fabricated a biaxially stretchable supercapacitor, which possesses a unique configuration of the parallel buckled hybrid fiber array. Owing to the reticulate SWCNT film and the improved fabrication technique, the hybrid fiber retained its porous architecture both outwardly and inwardly, manifesting a superior capacity of 215 F g(-1).

Nanostructured graphene composite papers for highly flexible and foldable supercapacitors.

Reduced graphene oxide (rGO) and polyaniline (PANI) assemble onto the surface of cellulose fibers (CFs) and into the pores of CF paper, to form a hierarchical nanostructured PANI-rGO/CF composite paper. Based on these composite papers, flexible and foldable all-solid-state supercapacitors are achieved.