Knowledge and Attitudes towards Medical Emergencies among Dentists in Iași, Romania.

The aim of this study was to evaluate the level of knowledge of resident dentists and new graduates regarding the etiology, clinical diagnosis, and treatment of the main medical emergency conditions. The study included a sample of 152 new graduates and residents in the first, second, and third year of training in Prosthodontics and General Dentistry from the Faculty of Dental Medicine in Iasi, Romania. Their level of knowledge and the attitudes were assessed using a questionnaire with 24 questions, divided into four sections.

The Evaluation of the Cervical Marginal Sealing of Direct vs. Indirect Composite Resin Restorations in MOD Cavities.

Introduction: The aim of this in vitro study was to compare the quality of marginal sealing at the cervical margins of indirect and direct composite resin restorations in mesio-occluso-distal (MOD) cavities.

Material And Method: MOD preparations were performed on 30 extracted teeth. The mesial cervical margin of each tooth was relocated using a flow composite resin (Enamel Plus HRi Flow, Micerium, Avegno, GE, Italy), then the samples were divided into three groups.

The Effect of Three Desensitizing Toothpastes on Dentinal Tubules Occlusion and on Dentin Hardness.

There are two main methods used for dentin hypersensitivity (DH) treatment: dentinal tubule occlusion and blockage of nerve activity. Dentifrices are the most common vehicles for active ingredients used for DH treatment. The aim of this study was to evaluate the efficacy of three toothpastes on dentinal tubule occlusion, mineral acquisition, and dentin hardness.

Can Graphene Pave the Way to Successful Periodontal and Dental Prosthetic Treatments? A Narrative Review.

Graphene, as a promising material, holds the potential to significantly enhance the field of dental practices. Incorporating graphene into dental materials imparts enhanced strength and durability, while graphene-based nanocomposites offer the prospect of innovative solutions such as antimicrobial dental implants or scaffolds. Ongoing research into graphene-based dental adhesives and composites also suggests their capacity to improve the quality and reliability of dental restorations.

Influence of the Loading with Newly Green Silver Nanoparticles Synthesized Using on the Antibacterial Activity and Surface Hardness of a Composite Resin.

The aim of the study was to evaluate the antibacterial activity and surface hardness of a light-activated microhybrid composite resin modified with green silver nanoparticles (AgNPs). AgNPs were synthesized using an extract and characterized through different methods such as UV-Vis, EDX, and FTIR. The obtained AgNPs were mixed with a microhybrid composite resin (Herculite XRV, Kerr Corp.

Evaluation of Knowledge and Practice of Resident Dentists in Iasi, Romania in the Management of Traumatic Dental Injuries: A Cross-Sectional Study.

Dentists play an essential role in the treatment of dental and periodontal traumatic injuries by providing early and correct treatment. The purpose of the present study was to assess the level of knowledge of dental residents regarding dental trauma. The cross-sectional study was conducted at the Faculty of Dental Medicine within the "Grigore T.

The Influence of Chlorhexidine Gluconate Dentine Pre-Treatment on Adhesive Interface and Marginal Sealing.

: The aim of this in vitro study was to evaluate the combined effect of a 2% chlorhexidine aqueous solution and a universal adhesive system applied in self-etch and etch-and-rinse strategies on the composite resin-dentin interface. : Class V cavities were prepared on the facial and lingual surfaces of forty caries-free molars extracted for orthodontic reasons. The samples were randomly divided into two groups corresponding to the used etching protocol: I-etch-and-rinse; II-self-etch.

Effects of Acidic Challenge on Demineralized Root Surface Treated with Silver Diamine Fluoride and Potassium Iodide.

Background: The aim of the study was to assess the protective effect of applying potassium iodide (KI) over silver diamine fluoride (SDF) on demineralized root dentin in the case of a sustained acidogenic attack.

Methods: Forty caries-free third molars were used in the study. A diamond disc was used to separate the roots and the tooth crowns from the roots.

The Genetic Architecture of Vascular Anomalies: Current Data and Future Therapeutic Perspectives Correlated with Molecular Mechanisms.

Vascular anomalies (VAs) are morphogenesis defects of the vascular system (arteries, capillaries, veins, lymphatic vessels) singularly or in complex combinations, sometimes with a severe impact on the quality of life. The progress made in recent years with the identification of the key molecular pathways (PI3K/AKT/mTOR and RAS/BRAF/MAPK/ERK) and the gene mutations that lead to the appearance of VAs has allowed the deciphering of their complex genetic architecture. Understanding these mechanisms is critical both for the correct definition of the phenotype and classification of VAs, as well as for the initiation of an optimal therapy and the development of new targeted therapies.

In Vitro Evaluation of Gastric Acid and Toothbrushing Effect on the Surface State of Different Types of Composite Resins.

: The aim of this in vitro study was to evaluate the effect of gastric acid associated with the effect of toothbrushing on the surface roughness of different types of composite resin used for direct restorations. : The materials used in this study were two microhybrid (Filtek Z250, Herculite XRV) and two nanohybrid (Filtek Z550, Herculite XRV Ultra) composite resins. Two hundred and forty cylindrical samples with a height of 2 mm and a diameter of 6 mm were divided into four groups (groups A, B, C and D) corresponding to each tested material (n = 60).

The Impact of Simulated Gastric Acid and Toothbrushing on Surface Characteristics of Resin-Modified Glass-Ionomer Cements.

Background and Objectives: The aim of this in vitro study was to evaluate the effect of simulated gastric acid associated with toothbrushing on the surface condition of three resin-modified glass-ionomer cements (RMGIC). Materials and Methods: One hundred and sixty samples of each material were obtained and included in three study groups according to the tested material: Group I (Ionolux, VOCO GmbH, Cuxhaven, Germany); Group II (Vitremer, 3 M-ESPE, St. Paul, MN, USA); and Group III (Fuji II LC, GC Corporation, Tokyo, Japan).

3D Printed and Bioprinted Membranes and Scaffolds for the Periodontal Tissue Regeneration: A Narrative Review.

Numerous technologies and materials were developed with the aim of repairing and reconstructing the tissue loss in patients with periodontitis. Periodontal guided bone regeneration (GBR) and guided tissue regeneration (GTR) involves the use of a membrane which prevents epithelial cell migration, and helps to maintain the space, creating a protected area in which tissue regeneration is favored. Over the time, manufacturing procedures of such barrier membranes followed important improvements.

Host Response Modulation Therapy in the Diabetes Mellitus-Periodontitis Conjuncture: A Narrative Review.

The inflammatory response of the host in periodontitis is the phenomenon that underlies the onset and evolution of periodontal destructive phenomena. A number of systemic factors, such as diabetes mellitus (DM), can negatively affect the patient with periodontitis, just as the periodontal disease can aggravate the status of the DM patient. Host response modulation therapy involves the use of anti-inflammatory and anti-oxidant products aimed at resolving inflammation, stopping destructive processes, and promoting periodontal healing, all important aspects in patients with high tissue loss rates, such as diabetic patients.

The Effects of 810 nm Diode Laser and Indocyanine Green on Periodontal Parameters and HbA1c in Patients with Periodontitis and Type II Diabetes Mellitus: A Randomized Controlled Study.

The aim of this study was to investigate the effects of adjunctive periodontal therapy of 5 mg/mL indocyanine green irradiation by an 810 nm diode laser (aPDT), supplementary to scaling and root planing (SRP) in patients with periodontitis and type II diabetes mellitus (DM) compared to the SRP alone, on periodontal clinical parameters and glycated hemoglobin A1c (HbA1c). The study was conducted on 49 subjects with type II DM and periodontitis, divided into two groups: the SRP group (n = 25), who followed SRP alone, and the SRP + aPDT group (n = 24), who followed SRP and four weekly sessions of indocyanine green irradiation by an 810 nm diode laser. Plaque Index (PI), Bleeding on Probing Index (BOP), probing depth (PD), clinical attachment loss (CAL) and HbA1c were investigated at baseline and after 6 months.

Conventional and Resin-Modified Glass Ionomer Cement Surface Characteristics after Acidic Challenges.

The aim of the present study was to assess by atomic force microscopy (AFM) the surface roughness of a traditional glass ionomer cement- GIC (Fuji IX GP, GC Corporation, Tokyo, Japan) and a resin modified glass ionomer cement- RMGIC (Vitremer, 3M ESPE, St. Paul, MN, USA) after different immersion regimes on some acidic drinks. Sixteen cylindrical samples having the height of 5 mm and the thickness of 2 mm were obtained from each material and they were divided into two groups: Group I (Fuji IX samples) and Group II (Vitremer samples).

Evaluation of the Surface Roughness of Bulk-Fill Composite Resins after Submission to Acidic and Abrasive Aggressions.

This in vitro study aimed to assess the erosive effect of hydrochloric acid in association with toothbrushing procedure on the surface condition of three bulk-fill composite resins used for direct restoration. A total of 480 samples (160 from each composite resin): X-tra Fil (VOCO, Germany)—group A, Filtek Bulk-fill Posterior (3M-ESPE, St. Paul, MN, USA)—group B, G-aenial Posterior (GC Japan)—group C were prepared, submitted to chemical attack for 60 min with hydrochloric acid 30% and, subsequently, submitted to the abrasive effect of toothbrushing using 10,000 cycles with medium and hard bristles, at three different times (immediately and after 30 min after acid attack or without any chemical attack).

The Influence of Abrasive and Acidic Aggressions on the Surface Condition of Flowable Composite Resin.

The aim of this in vitro study was to evaluate the effect of hydrochloric acid associated with the abrasive effect of toothbrushing on the surface condition of three flowable composite resins used for direct restoration. Seventy samples of each composite resin: Grandio Flow (VOCO, Germany)-group A, Filtek Ultimate Flow (3M-ESPE, MN, USA)-group B, G-aenial Flo X (GC Europe)-group C were prepared, submersed in hydrochloric acid 30% for 60 min and then submitted to simulated toothbrushing procedure using 5000 cycles with toothbrushes with medium and hard bristles, immediately after the chemical attack, after 30 min or without any chemical attack. The sample's surface roughness was analyzed using a noncontact profilometer (Dektak XT, Bruker, USA).

Atomic force microscopy study regarding the influence of etching on affected and sclerotic dentine.

Unlabelled: Aim of study is to compare the effect of etching with ortho-phosphoric acid on sound dentine, affected dentine and sclerotic dentine through AFM analysis.

Material And Methods: The group study included 30 extracted third molars, 20 with acute and chronic carious lesions and 10 intact teeth. Teeth were sectioned in long axe to prepare sections with carious lesions surrounded by sound dentine.

[The influence of polymerization method on the mechanical properties of dental resins composites].

Unlabelled: The aim of the study was to asses the influence of the time, method and type of light curing on the compressive strength of dental composites. Dental composite resin (T-Econom, Ivoclar Vivadent) was cured for 10, 30 or 40 sec. with either a commercial conventional halogen light curing unit (LCU)--Hilux, (Benliodlu Dental Inc), or a light emitting diode (LED), LCU-Bluedent LED Smart.

[Effect of saliva contamination on microleakage around class-5 cavities restored with three different types of adhesive materials].

The recent improvement of adhesive materials should decrease the risk related to saliva contamination. The aim of this study was to evaluate the effect of saliva contamination on the microleakage within class V cavities restored with three different types of materials: conventional glass ionomer cement, composite resin and compomer. 30 human extracted teeth were randomly divided in 3 equal groups.