Evaluation of toxicity and mutagenicity of a synthetic effluent containing azo dye after Advanced Oxidation Process treatment.

Approximately 20% industrial water pollution comes from textile dyeing process, with Azo dyes being a major problem in this scenario and requiring new forms of efficient treatment. Effluent treatments using the Advanced Oxidation Processes (AOP) are justified by the potential of application in the dyed effluent treatments once they can change the Azo dye chemical structure. Thus, this study aimed to evaluate the toxicity and mutagenic capacity of a synthetic effluent containing Amido Black 10B (AB10B) azo dye before treatment with AOP, named Gross Synthetic Effluent (GSE), and after the AOP, named Treated Synthetic Effluent (TSE).

Quantitative evaluation of total volatile organic compounds in urban and rural schools of southern Brazil.

Volatile organic compounds, VOCs, are air pollutants widely produced by biogenic and anthropogenic sources. This work quantitatively studied the presence of these gases in the internal and external environments of schools, comparing one in an urban area (La Salle School, Canoas, RS) and another in a rural area (Santa Cassia Farm School, Nova Santa Rita, RS). The aim of this study was to compare if this environmental differences (location) influence their gases concentration.

Environmental assessment of viticulture waste valorisation through composting as a biofertilisation strategy for cereal and fruit crops.

Composting is a solid waste management alternative that avoids the emission of methane associated with its disposal in landfill and reduces or eliminates the need for chemical fertilisers if compost is applied. The main objective of this study was to analyse the environmental burdens of composting as a way to achieve a more circular valorisation of wine waste. To do so, with the purpose of identifying optimal operational conditions and determining the "hotspots" of the process, the life cycle assessment (LCA) methodology was used.

Treatment of re-refining effluent from lubricating oils by combining electrocoagulation and coagulation-flocculation processes.

A combination of electrocoagulation and coagulation-flocculation processes was used for re-refining effluent from lubricating oils. The efficiency of the process was evaluated based on the chemical oxygen demand (COD), color, and turbidity of the refined effluent. Electrocoagulation (EC) and coagulation-flocculation parameters, such as the initial pH (3.

Amido Black 10B a widely used azo dye causes DNA damage in pro- and eukaryotic indicator cells.

Acid Black 10B (AB10B) is widely used for the production of textiles, leather and prints. It is a representative of azo dyes and it is well documented that some of these compounds are mutagenic per se, and that cleavage products (in particular aromatic amines) may cause damage of the genetic material and cancer. Since no toxicological data on AB10B have been published, we evaluated its mutagenic activity in Salmonella/microsome assays and studied its acute toxic and genotoxic properties in a human derived liver cell line (HepG2) which retained the activities of drug metabolizing enzymes.

Evaluation of the efficiency of coagulation/flocculation and Fenton process in reduction of colour, turbidity and COD of a textile effluent.

The present study investigated the efficiency of physicochemical processes of coagulation and flocculation and Fenton advanced oxidative process in reducing the parameters of colour, turbidity and Chemical Oxygen Demand (COD) of a real effluent from a textile industry. During the physicochemical process, the efficiencies of different coagulants (aluminium polychloride (Polifloc 18), ferric chloride (Acquafloc FC40), aluminium sulphate combined with organic coagulant (AST) and aluminium sulphate) and nonionic (FX NS2), cationic (FX CS6 and FX CS7) and anionic (FX AS6 and AN905) flocculants were tested. After the tests, 72.

Effective removal of sulfur components from Brazilian power-coals by ultrasonication (40kHz) in presence of H2O2.

The present investigation reports a preliminary attempt of using ultrasonic energy (40kHz) to clean some low rank high sulfur Brazilian power-coal samples in presence of H2O2 solution. All types of sulfur components (i.e.

The properties of the nano-minerals and hazardous elements: Potential environmental impacts of Brazilian coal waste fire.

Brazilian coal area (South Brazil) impacted the environment by means of a large number of coal waste piles emplaced over the old mine sites and the adjacent areas of the Criciúma, Urussanga, and Siderópolis cities. The area studied here was abandoned and after almost 30 years (smokeless visual) some companies use the actual minerals derived from burning coal cleaning rejects (BCCRs) complied in the mentioned area for industry tiles or refractory bricks. Mineralogical and geochemical similarities between the BCCRs and non-anthropogenic geological environments are outlined here.

Nano-mineralogy of suspended sediment during the beginning of coal rejects spill.

Ultrafine and nanometric sediment inputs into river systems can be a major source of nutrients and hazardous elements and have a strong impact on water quality and ecosystem functions of rivers and lakes regions. However, little is known to date about the spatial distribution of sediment sources in most large scale river basins in South America. The objective of this work was to study the coal cleaning rejects (CCRs) spill that occurred from a CCRs impoundment pond into the Tubarão River, South Brazil, provided a unique occasion to study the importance and role of incidental nanoparticles associated with pollutant dispersal from a large-scale, acute aquatic pollution event.

Modification, adsorption, and geochemistry processes on altered minerals and amorphous phases on the nanometer scale: examples from copper mining refuse, Touro, Spain.

The sulfide oxidation and precipitation of Al-Fe-secondary minerals associated with abandoned acid mine drainage (AMD) from the abandoned copper mine waste pile at Touro, Spain, has been studied by sequential extraction (SE) combined with several techniques with the intent of understanding the role of these processes play in the natural attenuation of hazardous element contaminants in the AMD. In addition, the fragile nature of nanominerals and ultrafine particle (UFP) assemblages from contaminated sediment systems from the abandoned copper mine required novel techniques and experimental approaches. The investigation of the geochemistry of complex nanominerals and UFP assemblages was a prerequisite to accurately assess the environmental and human health risks of contaminants and cost-effective chemical and biogeological remediation strategies.

Potential utilization for the evaluation of particulate and gaseous pollutants at an urban site near a major highway.

Works of particle number and mass concentration variability have a great importance since they may indicate better the influence of vehicle emissions in an urban region. Moreover, the importance of this work lies in the fact that there are few studies in Brazil, where the fuel used has unique characteristics. Consequently, this paper presents measurements of particle number (size range 0.

Nanoparticulate mineral matter from basalt dust wastes.

Ultra-fine and nano-particles derived from basalt dust wastes (BDW) during "stonemeal" soil fertilizer application have been the subject of some concern recently around the world for their possible adverse effects on human health and environmental pollution. Samples of BDW utilized were obtained from companies in the mining district of Nova Prata in southern Brazil for chemical characterization and nano-mineralogy investigation, using an integrated application of advanced characterization techniques such as X-ray diffraction (XRD), High Resolution-Transmission Electron microscopy (HR-TEM)/(Energy Dispersive Spectroscopy) EDS/(selected-area diffraction pattern) SAED, Field Emission-Scanning Electron Microscopy (FE-SEM)/EDS and granulometric distribution analysis. The investigation has revealed that BDW materials are dominated by SiO2, Al2O3 and Fe2O3, with a complex micromineralogy including alkali feldspar, augite, barite, labradorite, hematite, heulandrite, gypsum, kaolinite, quartz, and smectite.

Chemical characterization, nano-particle mineralogy and particle size distribution of basalt dust wastes.

Understanding the geochemistry of basalt alteration is central to the study of agriculture systems. Various nano-minerals play an important role in the mobilization of contaminants and their subsequent uptake by plants. We present a new analytical experimental approach in combination with an integrated analytical protocol designed to study basalt alteration processes.

Nano-mineralogical investigation of coal and fly ashes from coal-based captive power plant (India): an introduction of occupational health hazards.

Coal derived nano-particles has been received much concern recently around the world for their adverse effects on human health and the environment during their utilization. In this investigation the mineral matter present in some industrially important Indian coals and their ash samples are addressed. Coal and fly ash samples from the coal-based captive power plant in Meghalaya (India) were collected for different characterization and nano-mineralogy studies.

Geochemistry of ultra-fine and nano-compounds in coal gasification ashes: a synoptic view.

The nano-mineralogy, petrology, and chemistry of coal gasification products have not been studied as extensively as the products of the more widely used pulverized-coal combustion. The solid residues from the gasification of a low- to medium-sulfur, inertinite-rich, volatile A bituminous coal, and a high sulfur, vitrinite-rich, volatile C bituminous coal were investigated. Multifaceted chemical characterization by XRD, Raman spectroscopy, petrology, FE-SEM/EDS, and HR-TEM/SEAD/FFT/EDS provided an in-depth understanding of coal gasification ash-forming processes.

Study of environmental pollution and mineralogical characterization of sediment rivers from Brazilian coal mining acid drainage.

Acid drainage from coal mines and metal mining is a major source of underground and surface water contamination in the world. The coal mining acid drainage (CMAD) from mine contains large amount of solids in suspension and a high content of sulphate and dissolved metals (Al, Mn, Zn, Cu, Pb, Fe, etc.) that finally are deposited in the rivers.