Polyethylene Film Surface Modification via Benzoic Acid Grafting.

A polyethylene (PE) film surface modification method is proposed via benzoic acid (BA) alkylation grafting to improve the surface affinity to polar substances. The procedure involves sequentially spraying AlCl and BA onto the heat-softened PE surface. The occurrence of the alkylation reaction was evaluated through comparative chemical, morphological, and thermal analyses.

High Parasitic Loads Quantified in Sylvatic , a Chagas Disease Vector.

is a sylvatic vector species in Brazil. In We aimed to characterize the discrete typing units (DTUs), the parasitic loads, and the blood meal sources of insects collected in rocky outcrops in rural areas in the state of Minas Gerais. An optical microscope (OM) and kDNA-PCR were used to examine natural infection by , and positive samples were genotyped by conventional multilocus PCR.

Rethinking of toiletries rigid bottles for recycling improvement.

Rethinking of plastic rigid shampoo bottles based on "Design for the Environment" concepts is proposed. Bottles of most consumed shampoo brands with different capacities were selected. Bottle weight/capacity ratio was assessed and compression mechanical properties were evaluated.

Fast recovery of house infestation with Triatoma brasiliensis after residual insecticide spraying in a semiarid region of Northeastern Brazil.

The northeastern semiarid region stands out in the Brazilian context regarding the eco-epidemiology of Chagas disease, in which Triatoma brasiliensis is the main vector of Trypanosoma cruzi. Persistent house invasion threatens the relative levels of progress achieved over previous decades. We conducted an intervention trial with a five-year follow-up to assess the impacts of residual spraying with pyrethroid insecticides on house infestation with T.

Analysis of the relationship between the amount and type of MSW and population socioeconomic level: Bahía Blanca case study, Argentina.

The amount and type of municipal solid waste (MSW) in Bahía Blanca (Argentina) were assessed and correlated with population socioeconomic level. In this sense, seven areas with different quality of life were selected. In addition, a parallel study on a control area was performed and validated for obtaining a representative result to provide analogous conclusions for the whole city.

Crystalline morphology of thermoplastic starch/talc nanocomposites induced by thermal processing.

A structural study about the changes induced by plasticization of native corn starch was carried out in this work. The influence of talc nanoparticles presence during starch thermal processing was also evaluated. Macroscopic observation of the granules appearance evolution during melt-mixing and thermo-compression was supported by a theoretical description related to these processing methods.

Triatoma brasiliensis Neiva, 1911: food sources and diversity of Trypanosoma cruzi in wild and artificial environments of the semiarid region of Ceará, northeastern Brazil.

Background: Knowledge of triatomine food sources in different ecotopes enables the estimation of T. cruzi transmission risk in diverse environments, as well as its dynamics of dispersion and ecological niche. For Triatoma brasiliensis in the Caatinga, in the northeast of Brazil, seasonal differences influence feeding eclecticism and rates of T.

Compatibilization of HIPS/ABS blends from WEEE by using Styrene-Butadiene Rubber (SBR).

The aim of this work is to develop compatibilization strategies for High Impact Polystyrene (HIPS)/ Acrylonitrile-Butadiene-Styrene (ABS) blends from WEEE in order to add value to these recycled plastics by improving their mechanical performance. Results from a screening study of HIPS/ABS blends compatibilization by the addition of Styrene-Butadiene Rubber (SBR) are presented. Two different weight proportion of HIPS/ABS physical blends were analyzed, 80/20 and 20/80, with three different concentration of SBR: 2, 10 and 20 wt%.

Process Window for Direct Recycling of Acrylonitrile-Butadiene-Styrene and High-Impact Polystyrene from Electrical and Electronic Equipment Waste.

The aim of this paper is to assess recycling process window of ABS (Acrylonitrile-Butadiene-Styrene) and HIPS (High impact Polystyrene) from WEEE (waste from electrical and electronic equipment) through a final properties/structure screening study on their blends. Main motivation is to evaluate which amount of one plastic WEEE can be included into the other at least keeping their properties. In this sense, a wider margin of error during sorting could be admitted to obtain recycling materials with similar technological application of recycled ABS and HIPS by themselves.

Recycling of mixed plastic waste from electrical and electronic equipment. Added value by compatibilization.

Plastic waste from electrical and electronic equipment (WEEE) grows up exponentially fast in the last two decades. Either consumption increase of technological products, like cellphones or computers, or the short lifetime of this products contributes to this rise generating an accumulation of specific plastic materials such ABS (Acrylonitrile-Butadiene-Styrene), HIPS (High impact Polystyrene), PC (Polycarbonate), among others. All of they can be recycled by themselves.

Domestic, peridomestic and wild hosts in the transmission of Trypanosoma cruzi in the Caatinga area colonised by Triatoma brasiliensis.

The role played by different mammal species in the maintenance of Trypanosoma cruzi is not constant and varies in time and place. This study aimed to characterise the importance of domestic, wild and peridomestic hosts in the transmission of T. cruzi in Tauá, state of Ceará, Caatinga area, Brazil, with an emphasis on those environments colonised by Triatoma brasiliensis.

Use of talc as low-cost clarifier for wastewater.

Talc is proposed as a low-cost mineral for wastewater clarification. In this sense, adsorption of methylene blue (MB) from aqueous solutions was studied comparatively by using sepiolite (qualified as very good adsorbent) and two talc samples with different particle size and purity degree. The MB adsorption was assessed by determining remnant dye in the supernatant using UV-vis spectroscopy and by detecting dye adsorbed on mineral samples through thermogravimetric analysis and infrared spectroscopy.

Glass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion Improvement.

Glass fibers (GF) are the reinforcement agent most used in polypropylene (PP) based composites, as they have good balance between properties and costs. However, their final properties are mainly determined by the strength and stability of the polymer-fiber interphase. Fibers do not act as an effective reinforcing material when the adhesion is weak.

On the genus Panstrongylus Berg 1879: evolution, ecology and epidemiological significance.

The genus Panstrongylus is currently composed of 13 species, several of which are involved in the transmission of Trypanosoma cruzi to humans in South and Central America. Some species exhibit minor morphological differences possibly associated with adaptation to different silvatic ecotopes or domestic environments. We present a distillation of past and recent literature pertaining to the biology of this group.

Population dynamics of Triatoma vitticeps (Stål, 1859) in Itanhomi, Minas Gerais, Brazil.

Taxonomic markers (head structure morphometry, isoenzymes and randon amplified polymorphism of DNA - RAPD) were used to understand the population dynamics of Triatoma vitticeps, predominant triatomine species in Itanhomi district, using samples obtained from domestic, peridomiciliary and sylvatic habitats. Morphometric analysis revealed sexual dimorphism within the three samples although specimens could not be separated according to the habitat in which they were captured. Forty-two bands were analyzed from RAPD profiles generated using four primers.

Biogeography of Brazilian populations of Panstrongylus megistus (Hemiptera, Reduviidae, Triatominae) based on molecular marker and paleo-vegetational data.

In epidemiological terms, Panstrongylus megistus is one of the most important species of triatomine bug in Brazil. Samples from 11 localities were studied using the random amplification of polymorphic DNA (RAPD) technique, which was able to differentiate the study populations clearly. Biogeographical data indicate that these populations could already have arisen 18,000 years ago (C(14)), it being possible to differentiate insects from the Brazilian states of Santa Catarina (SC) in the south, Ceará (CE) in the northeast and another large intermediate block containing the remaining eight populations from five other states.

Occurrence and variability of Panstrongylus lutzi in the State of Ceará, Brazil.

Panstrongylus lutzi is generally restricted to the "caatinga" areas of north-eastern Brazil. Adult insects are frequently found in local houses, but colonies have not previously been registered in the statistics of the Control Programme of Chagas Disease. In Ceará State, our study revealed increasing occurrence of this species, usually with high infection rates for Trypanosoma cruzi, and always represented by adults that invaded the artificial environment.

Interpopulation variability among Panstrongylus megistus (Hemiptera: Reduviidae) from Brazil.

Comparisons were made among Panstrongylus megistus (Burmeister) from three areas of Brazil (Bahia, Minas Gerais, and Santa Catarina), where populations differ with regard to their degree of association with human dwellings. The following characters were studied: morphology of the eggs and the male genitalia; morphometry of the head and thorax; isoenzyme profile; enzymatic activity of the alpha-glycerophosphate dehydrogenase (alpha-GPDH); and cytogenetics. In general, differences were observed in the weight, diameter, and length of the egg among Bahia, Minas Gerais, and Santa Catarina populations.

Changes in particle area measurements due to SEM accelerating voltage and magnification.

Scanning electron microscopy (SEM) images of polymer blends followed by digital image analysis is a rapid and easy method for the measurement of particle size and dispersion. The particle size determination is done with appropriate off-line image analysis software. However, it is necessary to understand how machine parameters involved in the formation of the SEM image influence area measurements of morphological features.