NMR Longitudinal Rotating Frame Relaxation Time (T) with a Weak Spin Locking Field as an Approach to Characterize Solid-State Active Pharmaceutical Ingredients: Proof of Concept.

Nuclear magnetic resonance (NMR) longitudinal rotating frame relaxation time (T), rarely used in low-field NMR, can be more effective than conventional T and T relaxation times to differentiate polymorphic forms of solid pharmaceuticals. This could be attributed to T sensibility to structural and molecular dynamics that can be enhanced by changing the strength of the oscillating magnetic field () of spinlock pulses. Here, we compared the capacity of T, T, and T to differentiate inactive (A) and active (C) crystalline forms of the World Health Organization essential drug Mebendazole.

Identification and quantification techniques of polymorphic forms - A review.

In the pharmaceutical industry, the unexpected appearance of crystalline forms could impact the therapeutic efficacy of an Active Pharmaceutical Ingredient (API). For quality control, a thorough qualitative and quantitative monitoring of pharmaceutical solid forms is essential to ensure the detection and the quantification of crystalline forms, wither different or with the same chemical composition (polymorphs) at a low detection level. The purpose of this paper was to review and highlight the importance of choosing adequate solid-state techniques for detection and quantification APIs that present polymorphism - based on limits of detection (LOD) and quantification (LOQ), pharmacopeias specifications, international guidelines and studies reported in the literature.

A New Saquinavir Mesylate-Sodium Decyl Sulfate Salt Discovered by Serendipity during an Anomalous Dissolution Test.

Purpose: To understand the anomalous behavior of Saquinavir Mesylate (SQVM) in sodium decyl sulfate (SDS) medium during a dissolution test through a crystallographic analysis of the crystal obtained. As a result, it will be possible to elucidate its crystal structure and carry out a complete solid-state characterization of the API.

Methods: The solid form obtained was characterized by a structural analysis through X-ray single crystal and powder diffraction.

Irbesartan desmotropes: Solid-state characterization, thermodynamic study and dissolution properties.

Irbesartan (IBS) is a tetrazole derivative and antihypertensive drug that has two interconvertible structures, 1H- and 2H-tautomers. The difference between them lies in the protonation of the tetrazole ring. In the solid-state, both tautomers can be isolated as crystal forms A (1H-tautomer) and B (2H-tautomer).

Drug Solubility Enhancement through the Preparation of Multicomponent Organic Materials: Eutectics of Lovastatin with Carboxylic Acids.

Lovastatin (LOV) is a drug used to treat hypercholesterolemia. Recent studies have identified its antioxidant effects and potential use in the treatment of some types of cancer. However, the low bioavailability related to its poor water solubility limits its use in solid oral dosage forms.

The effect of solution environment and the electrostatic factor on the crystallisation of desmotropes of irbesartan.

The experimental conditions necessary for stabilising irbesartan (IBS) tautomers in solution and selectively obtaining the desmotropic crystal forms are presented herein. 1H and 2H tautomers were stabilized in specific solution conditions and the 2H-tetrazole⋯imidazole interaction was confirmed by solution-state NMR. The results showed that highly polar and polarisable solvents (higher values of the electrostatic factor (EF)) lead to the crystallisation of IBS form B.

Challenging identification of polymorphic mixture: Polymorphs I, II and III in olanzapine raw materials.

Olanzapine (OLZ), a drug for the treatment of schizophrenia, presents in more than 60 crystal forms. Polymorphs I, II and III were reported, however, the preparation conditions for pure II and III have not been reported. Polymorph IV was reported but this form is actually polymorph II described at different temperature.

Clay minerals: Properties and applications to dermocosmetic products and perspectives of natural raw materials for therapeutic purposes-A review.

Clay minerals are layered materials with a number of peculiar properties, which find many relevant applications in various industries. Since they are easily found everywhere, they are particularly attractive due to their economic viability. In the cosmetic industry, clay minerals are often used as excipients to stabilize emulsions or suspensions and to modify the rheological behavior of these systems.

Correlation between microstructure and bioequivalence in anti-HIV drug efavirenz.

Polymorphism and particle size distribution can impact the dissolution behaviour and, as a consequence, bioavailability and bioequivalence of poorly soluble drugs, such as Efavirenz (EFV). Nevertheless, these characteristics do not explain some failures occurring in in vitro assays and in in vivo studies. EFV belongs to Class II and the High Activity Antiretroviral Therapy (HAART) is considered the best choice in the treatment of adults and children.

Crystallization of progesterone polymorphs using polymer-induced heteronucleation (PIHn) method.

Progesterone is a natural hormone steroid used in humans for several treatments and in livestock for artificial insemination, which exhibits two polymorphic forms at ambient conditions: form 1 and form 2. Form 2 is metastable and more soluble than form 1; however, it is not suitable to use as powder raw material because it transforms into form 1 by the effects of grinding. A polymorphic screening of progesterone based on polymer-induced heteronucleation method was performed as an alternative to prepare the metastable form.

Solid-state evaluation and polymorphic quantification of venlafaxine hydrochloride raw materials using the Rietveld method.

Venlafaxine hydrochloride (VEN) is an antidepressant drug widely used for the treatment of depression. The purpose of this study was to carry out the preparation and solid state characterization of the pure polymorphs (Forms 1 and 2) and the polymorphic identification and quantification of four commercially-available VEN raw materials. These two polymorphic forms were obtained from different crystallization methods and characterized by X-ray Powder Diffraction (XRPD), Diffuse Reflectance Infrared Fourier Transform (DRIFT), Raman Spectroscopy (RS), liquid and solid state Nuclear Magnetic Resonance (NMR and ssNMR) spectroscopies, Differential Scanning Calorimetry (DSC), and Scanning Electron Microscopy (SEM) techniques.

Dissolution properties, solid-state transformation and polymorphic crystallization: progesterone case study.

Progesterone is a natural steroid hormone and a poor soluble drug which presents two polymorphs (forms 1 and 2). Different methods to obtain form 2 were tested and a complete solid-state characterization of both polymorphs (forms 1 and 2) was conducted. X-ray powder diffraction, hot stage microscopy, Fourier transform infrared, dispersive Raman, (13)C solid-state nuclear magnetic resonance spectroscopy, thermal analysis, scanning electron microscopy techniques and intrinsic dissolution rates (IDR) were applied to investigate physical-chemical and dissolution properties of these two polymorphs.

Development and physicochemical characterization of saquinavir mesylate solid dispersions using Gelucire 44/14 or PEG 4000 as carrier.

Solid dispersions of saquinavir mesylate containing either Gelucire® 44/14 or poly(ethylene glycol) (PEG) 4000, or mixtures of each carrier with Tween 80 or polyvinyl pyrrolidone (PVP) K30 were prepared in order to enhance the drug dissolution rate. These systems were prepared by the melting method and characterized by X-ray powder diffraction, microscopical techniques, and Raman spectroscopy aiming to establish a relationship between physicochemical and dissolution properties under different cooling conditions. Modifications in degree of crystalline order/disorder over time were observed in preparations with both carriers.

Single crystal structure, solid state characterization and dissolution rate of terbinafine hydrochloride.

Terbinafine hydrochloride (TH), a poorly water soluble antifungal agent, was characterized by solid state techniques including differential scanning calorimetry, thermogravimetry, X-ray powder diffraction, optical and electron microscopies, Fourier transform infrared, Raman and solid-state nuclear magnetic resonance spectroscopies and intrinsic dissolution rate (IDR). A colorless single crystal of TH was grown from an ethanol:water solution and its crystalline structure was determined through X-ray single crystal diffraction. Also, a new crystal habit of TH was obtained through the slow solvent evaporation technique revealing a needle-like shape.

Morphology study of progesterone polymorphs prepared by polymer-induced heteronucleation (PIHn).

In this article, morphology of progesterone polymorphs prepared by polymer-induced heteronucleation (PIHn) technique was studied. Hydroxypropyl methylcellulose(HPMC), such as dextran T-500 and gelatin G-9382, polyisoprene (PI), and acrylonitrile/butadiene copolymer (NBR) were used as substrates. The crystallizations were performed by solvent evaporation at room temperature from 0.

Solid-state characterization and dissolution properties of Fluvastatin sodium salt hydrates.

The present study reports the solid-state properties of Fluvastatin sodium salt crystallized from different solvents for comparison with crystalline forms of the commercially available raw material and United States Pharmacopeia (USP) reference standard. Fluvastatin (FLV) samples were characterized by several techniques; such as X-ray powder diffractometry, differential scanning calorimetry, thermogravimetry, liquid and solid-state nuclear magnetic resonance spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy, and scanning electron microscopy. In addition, intrinsic dissolution rate (IDR) of samples was performed in order to study the influence of crystalline form and other factors on rate and extent of dissolution.

Polymorphism in nimodipine raw materials: development and validation of a quantitative method through differential scanning calorimetry.

Due to the physical-chemical and therapeutic impacts of polymorphism, its monitoring in raw materials is necessary. The purpose of this study was to develop and validate a quantitative method to determine the polymorphic content of nimodipine (NMP) raw materials based on differential scanning calorimetry (DSC). The polymorphs required for the development of the method were characterized through DSC, X-ray powder diffraction (XRPD) and Raman spectroscopy and their polymorphic identity was confirmed.

Nuclear quadrupole resonance: a technique to control hydration processes in the pharmaceutical industry.

Pharmaceuticals can exist in many solid forms, which can have different physical and chemical properties. These solid forms include polymorphs, solvates, amorphous, and hydrates. Particularly, hydration process can be quite common since pharmaceutical solids can be in contact with water during manufacturing process and can also be exposed to water during storage.

(S)-6-Chloro-4-cyclo-propyl-ethynyl-4-trifluoro-methyl-1H-3,1-benzoxazin-2(4H)-one.

Two independent mol-ecules comprise the crystallographic asymmetric unit in the title anti-retroviral agent Efavirenz, C(14)H(9)ClF(3)NO(2), and these have noteworthy differences in conformation. The major difference relates to the orientation of the 2-cyclo-propyl-ethynyl residue relative to the six-membered heterocycle: this approaches an orthogonal disposition in mol-ecule a compared to a more flattened conformation in mol-ecule b, the difference being reflected in the O(ring)-C-C-C(ethyne) torsion angles of 65 (4) and 159 (5)°, respectively. The independent mol-ecules are connected via the eight-membered {⋯HNC (O)}(2) amide synthon.

Rosiglitazone maleate 0.25-hydrate: a pseudopolymorphic form.

The present 0.25-hydrated form of rosiglitazone maleate [systematic name: (+/-)-2-({2-[2,4-dioxo-1,3-thiazolidin-5-ylmethyl)phenoxy]ethyl}methylamino)pyridinium maleate 0.25-hydrate], C(18)H(20)N(3)O(3)S(+) x C(4)H(3)O(4)(-) x 0.

Physicochemical characterization of deflazacort: thermal analysis, crystallographic and spectroscopic study.

The solid state properties of deflazacort (1-(1beta,16alpha)-21-(acetyloxy)-11-hydroxy-2'-methyl-5'H-pregna-1,4-dieno[17,16-d]oxazole-3,20-dione, 1) were investigated using differential scanning calorimetry (DSC), thermogravimetry (TG), single-crystal X-ray diffraction, solid and liquid nuclear magnetic resonance spectroscopy ((13)C NMR), Fourier transform infrared and Raman spectroscopy (FTIR and FT Raman). From the trends observed in the crystal structure and spectral data some conclusions can be made about hydrogen bonding, molecular conformation and crystal packing. Compound 1 crystallizes in an orthorhombic cell, space group P2(1)2(1)2(1) and the following lattice parameters: a=11.

Nine N-aryl-2-chloronicotinamides: supramolecular structures in one, two and three dimensions.

Structures are reported here for eight further substituted N-aryl-2-chloronicotinamides, 2-ClC(5)H(3)NCONHC(6)H(4)X-4'. When X = H, compound (I) (C(12)H(9)ClN(2)O), the molecules are linked into sheets by N-H..

The crystal structure and physicochemical characteristics of 2-hydroxy-N-[3(5)-pyrazolyl]-1,4-naphthoquinone-4-imine, a new antitrypanosomal compound.

This study was designed to investigate the physical characteristics and crystalline structure of 2-hydroxy-N-[3(5)-pyrazolyl]-1,4-naphthoquinone-4-imine (PNQ), a new active compound against Trypanosoma cruzi, the causative agent of American trypanosomiasis. Methods used included differential scanning calorimetry, thermogravimetry, hot stage microscopy, polarized light microscopy (PLM), Fourier-transform infrared (FTIR) spectroscopy, and high-resolution X-ray powder diffraction (HR-XRPD). According to PLM and HR-XRPD data, PNQ crystallized as red oolitic crystals (absolute methanol) or prisms (dimethyl sulfoxide [DMSO]-water) with the same internal structure.