Controllable Graphene/MoS Heterointerfaces by Perpendicular Surface Functionalization.

Surface chemistry and interface interactions profoundly influence the properties of two-dimensional (2D) materials and heterostructures. Therefore, developing methods to precisely control surfaces and interfaces is crucial for harnessing the properties and functions of 2D materials and heterostructures. Here, we developed a facile approach to tuning the interface distance and properties of graphene/MoS heterostructures (G/MoS) by varying the functional groups attached to the surface of graphene bottom layer.

Switchable protection and exposure of a sensitive squaraine dye within a redox active rotaxane.

In nature, molecular environments in proteins can sterically protect and stabilize reactive species such as organic radicals through non-covalent interactions. Here, we report a near-infrared fluorescent rotaxane in which the stabilization of a chemically labile squaraine fluorophore by the coordination of a tetralactam macrocycle can be controlled chemically and electrochemically. The rotaxane can be switched between two co-conformations in which the wheel either stabilizes or exposes the fluorophore.

Electrochemical identification and quantification of through-plane proton channels in graphene oxide membranes.

Stacked graphene oxide (GO) proton membranes are promising candidates for use in energy devices due to their proton conductivity. Identification of through-plane channels in these membranes is critical but challenging due to their anisotropic nature. Here, we present an electrochemical reduction method for identifying and quantifying through-plane proton channels in GO membranes.

Dimethylene-Cyclopropanide Units as Building Blocks for Fluorescence Dyes.

Many organic dyes are fluorescent in solution. In the solid state, however, quenching processes often dominate, hampering material science applications such as light filters, light-emitting devices, or coding tags. We show that the dimethylene-cyclopropanide scaffold can be used to form two structurally different types of chromophores, which feature fluorescence quantum yields up to 0.

Influence of Lattice Defects on Trans-Oligoene Substructure Formation in Graphene.

The photochemical reaction of iodine and graphene induces strong new Raman modes due to the formation of trans-oligoene substructures in graphene domains. This unique reactivity was demonstrated before on defect-free graphene, however leaving the influence of e. g.

Evidence for Trans-Oligoene Chain Formation in Graphene Induced by Iodine.

Functionalization of pristine graphene by hydrogen and fluorine is well studied, resulting in graphane and fluorographene structures. In contrast, functionalization of pristine graphene with iodine has not been reported. Here, the functionalization of graphene with iodine using photochemical activation is presented, which is thermally reversible at 400 °C.

Origin of Oxygen in Graphene Oxide Revealed by O and O Isotopic Labeling.

Wet-chemical oxidation of graphite in a mixture of sulfuric acid with a strong oxidizer, such as potassium permanganate, leads to the formation of graphene oxide with hydroxyl and epoxide groups as the major functional groups. Nevertheless, the reaction mechanism remains unclear and the source of oxygen is a subject of debate. It could theoretically originate from the oxidizer, water, or sulfuric acid.

Managing Excess Lead Iodide with Functionalized Oxo-Graphene Nanosheets for Stable Perovskite Solar Cells.

Stability issues could prevent lead halide perovskite solar cells (PSCs) from commercialization despite it having a comparable power conversion efficiency (PCE) to silicon solar cells. Overcoming drawbacks affecting their long-term stability is gaining incremental importance. Excess lead iodide (PbI ) causes perovskite degradation, although it aids in crystal growth and defect passivation.

Influence of the coffee-ring effect and size of flakes of graphene oxide films on their electrochemical reduction.

Electrodes for electrochemical reduction of graphene oxide (GO) are coated with thin films using drop-casting and evaporation-assisted self-assembly. The influence of loading, the size of the flakes of GO, and the macroscopic coffee-ring effect occurring during drying are investigated. The effective transfer of protons and electrons in the electrochemical reduction of GO is decisive.

Regiochemically Oxo-functionalized Graphene, Guided by Defect Sites, as Catalyst for Oxygen Reduction to Hydrogen Peroxide.

Heteroatom-doped graphene attracted tremendous attention because of advanced electrocatalytic properties, for example, for oxygen reduction. However, the role of oxygen atoms as heteroatoms in graphene should be explored more deeply. Here, we used statistical Raman spectroscopy for single-layer material analysis and found that the regiochemistry close to vacancy defects plays a decisive role.

Interlayer electron modulation in van der Waals heterostructures assembled by stacking monolayer MoS onto monolayer graphene with different electron transfer ability.

Achieving tunable optoelectronic properties and clarifying interlayer interactions are key challenges in the development of 2D heterostructures. Herein, we report the feasible modulation of the optoelectronic properties of monolayer MoS (1L-MoS) on three different graphene monolayers with varying ability in extracting electrons. Monolayer oxygen-functionalized graphene (1L-oxo-G, a high amount of oxygen of 60%) with a work function (WF) of 5.

Aggregation-induced emission leading to two distinct emissive species in the solid-state structure of high-dipole organic chromophores.

The concept of aggregation-induced emission represents a means to rationalise photoluminescence of usually nonfluorescent excimers in solid-state materials. In this publication, we study the photophysical properties of selected diaminodicyanoquinone (DADQ) derivatives in the solid state using a combined approach of experiment and theory. DADQs are a class of high-dipole organic chromophores promising for applications in non-linear optics and light-harvesting devices.

Fluorescence Quenching in J-Aggregates through the Formation of Unusual Metastable Dimers.

Molecular aggregation alters the optical properties of a system as fluorescence may be activated or quenched. This is usually described within the well-established framework of H- and J-aggregates. While H-aggregates show nonfluorescent blueshifted absorption bands with respect to the isolated monomer, J-aggregates are fluorescent displaying a redshifted peak.

Substitution Pattern-Controlled Fluorescence Lifetimes of Fluoranthene Dyes.

The absorption and emission properties of organic dyes are generally tuned by altering the substitution pattern. However, tuning the fluorescence lifetimes over a range of several 10 ns while barely affecting the spectral features and maintaining a moderate fluorescence quantum yield is challenging. Such properties are required for lifetime multiplexing and barcoding applications.

Emerging field of few-layered intercalated 2D materials.

The chemistry and physics of intercalated layered 2D materials (2DMs) are the focus of this review article. Special attention is given to intercalated bilayer and few-layer systems. Thereby, intercalated few-layers of graphene and transition metal dichalcogenides play the major role; however, also other intercalated 2DMs develop fascinating properties with thinning down.

Between Aromatic and Quinoid Structure: A Symmetrical UV to Vis/NIR Benzothiadiazole Redox Switch.

Reversibly switching the light absorption of organic molecules by redox processes is of interest for applications in sensors, light harvesting, smart materials, and medical diagnostics. This work presents a symmetrical benzothiadiazole (BTD) derivative with a high fluorescence quantum yield in solution and in the crystalline state and shows by spectroelectrochemical analysis that reversible switching of UV absorption in the neutral state, to broadband Vis/NIR absorption in the 1st oxidized state, to sharp band Vis absorption in the 2nd oxidized state, is possible. For the one-electron oxidized species, formation of a delocalized radical is confirmed by electron paramagnetic resonance spectroelectrochemistry.

Chemical and electrochemical synthesis of graphene oxide - a generalized view.

Graphene oxide (GO) is a water soluble carbon material in general, suitable for applications in electronics, the environment, and biomedicine. GO is produced by oxidation of abundantly available graphite, turning black graphite into water-dispersible single layers of functionalized graphene-related materials. Therefore, oxidation gives chemicals access to the complete surface area of GO.

Identification of Semiconductive Patches in Thermally Processed Monolayer Oxo-Functionalized Graphene.

The thermal decomposition of graphene oxide (GO) is a complex process at the atomic level and not fully understood. Here, a subclass of GO, oxo-functionalized graphene (oxo-G), was used to study its thermal disproportionation. We present the impact of annealing on the electronic properties of a monolayer oxo-G flake and correlated the chemical composition and topography corrugation by two-probe transport measurements, XPS, TEM, FTIR and STM.

Evidence for Electron Transfer between Graphene and Non-Covalently Bound π-Systems.

Hybridizing graphene and molecules possess a high potential for developing materials for new applications. However, new methods to characterize such hybrids must be developed. Herein, the wet-chemical non-covalent functionalization of graphene with cationic π-systems is presented and the interaction between graphene and the molecules is characterized in detail.

Room-Temperature Transport Properties of Graphene with Defects Derived from Oxo-Graphene.

In recent years, graphene oxide has been considered as a soluble precursor of graphene for electronic applications. However, the performance lags behind that of graphene due to lattice defects. Here, the relation between the density of defects in the range of 0.

Controlled assembly of artificial 2D materials based on the transfer of oxo-functionalized graphene.

Functionalized 2D materials have unique properties, but are currently not used for the assembly of van der Waals heterostructures. Here, we present the controlled transfer of artificially synthesized, polar and highly transparent oxo-functionalized graphene, which can decouple graphene layers.

Correction: Fluorescence of a chiral pentaphene derivative derived from the hexabenzocoronene Motif.

Correction for 'Fluorescence of a chiral pentaphene derivative derived from the hexabenzocoronene Motif' by Philipp Rietsch et al., Chem. Commun.

A multiwavelength emission detector for analytical ultracentrifugation.

In this study, a new detector for multiwavelength emission analytical ultracentrifugation (MWE-AUC) is presented, which allows measuring size- or composition-dependent fluorescence properties of nanoparticle ensembles. Validation of the new setup is carried out comparison to a benchtop photoluminescence spectrometer and the established extinction-based multiwavelength analytical ultracentrifuge (MWL-AUC). The results on fluorescent proteins and silica particles demonstrate that the new device not only correctly reproduces sedimentation and diffusion coefficients of the particles but provides also meaningful fluorescence spectra.