Performance and energetic analysis of hydrodynamic cavitation and potential integration with existing advanced oxidation processes: A case study for real life greywater treatment.

The current work is a "first of a kind" report on the feasibility and efficacy of hydrodynamic cavitation integrated Advanced Oxidation Processes (AOP's) towards treatment of a real life greywater stream in form of kitchen wastewater. The work has been carried out in a sequential manner starting with geometry optimization of orifice plate (cavitating device) followed by studying the effects of inlet pressure, pH, effluent dilution ratio on degradation of TOC and COD. Under optimized conditions of pH 3, 4 bar pressure, TOC and COD reduction of 18.

Chitosan-polytetrafluoroethylene composite membranes for separation of methanol and toluene by pervaporation.

Present work reports the synthesis of a novel Chitosan-Polytetrafluoroethylene composite membrane with solvent resistant property for efficient separation of methanol/toluene mixture by pervaporation. The composite was crossed with tetraethyl orthosilicate (TEOS) to prevent or reduce membrane swelling and improve the separation factor. The synthesized membranes were characterized by SEM, FTIR and DSC analysis.

Solvent resistant chitosan/poly(ether-block-amide) composite membranes for pervaporation of n-methyl-2-pyrrolidone/water mixtures.

A novel composite barrier comprising of hydrophilic and solvent resistant chitosan (CS) membrane on porous solvent resistant poly(ether-block-amide) (PEBA-2533) substrate was synthesized for pervaporation (PV) based dehydration of the polar aprotic n-methyl-2-pyrolidone (NMP) green solvent. The composite barrier was crosslinked with tetraethyl orthosilicate (TEOS) to control swelling and enhance selectivity. Operating parameters such as feed water concentration, permeate pressure and membrane thickness were varied to assess membrane flux and selectivity.

Pervaporation performance of PPO membranes in dehydration of highly hazardous mmh and udmh liquid propellants.

Polyphenylene oxide (PPO) membranes synthesized from 2,6-dimethyl phenol monomer were subjected to pervaporation-based dehydration of the highly hazardous and hypergolic monomethyl hydrazine (MMH) and unsymmetrical dimethyl hydrazine (UDMH) liquid propellants. Membranes were characterized by TGA, DSC and SEM to study the effect of temperature besides morphologies of surface and cross-section of the films, respectively. Molecular dynamics (MD) simulation was used to study the diffusion behavior of solutions within the membrane.

Performance assessment and hydrodynamic analysis of a submerged membrane bioreactor for treating dairy industrial effluent.

Submerged membrane bioreactor (SMBR) is a relatively advanced technology for waste water treatment that involves integrated aerobic and anaerobic biological processes with membrane filtration. In the present investigation, hydrophobic polyvinylidene fluoride (PVDF) and hydrophilic polyacrylonitrile (PAN) hollow fiber (HF) membranes were tested in an indigenously fabricated SMBR for dairy effluent treatment under aerobic conditions using mixed microbial consortia. Effect of operating parameters such as suction pressure, degree of aeration and trans-membrane pressure (TMP) on membrane performance in terms of flux, rejection of turbidity, BOD and COD besides fouling characteristics was investigated.