Publications by authors named "Si-Young Choi"

Article Synopsis
  • * Iso-valent titanium (Ti) dopants in supercooled vanadium oxide (VO) films enable MIT with minimal hysteresis and without altering the material's overall structure.
  • * The formation of local vanadium (V) dimers leads to a stable interface between insulating and metallic phases, significantly improving electronic switching speeds and device endurance.
View Article and Find Full Text PDF

Understanding microscopic mechanisms of polarization retention characteristics in ferroelectric thin films is of great significance for exploring unusual physical phenomena inaccessible in the bulk counterparts and for realizing thin-film-based functional electronic devices. Perovskite (K,Na)NbO is an excellent class of lead-free ferroelectric oxides attracting tremendous interest thanks to its potential applications to nonvolatile memory and eco-friendly energy harvester/storage. Nonetheless, in-depth investigation of ferroelectric properties of (K,Na)NbO films and the following developments of nano-devices are limited due to challenging thin-film fabrication associated with nonstoichiometry by volatile K and Na atoms.

View Article and Find Full Text PDF

Untethered microrobots offer the possibility to perform medical interventions in anatomically complex and small regions in the body. Presently, it is necessary to access the upper urinary tract to diagnose and treat Upper Tract Urothelial Carcinoma (UTUC). Diagnostic and treatment challenges include ensuring adequate tissue sampling, accurately grading the disease, achieving completeness in endoscopic treatment, and consistently delivering medications to targeted sites.

View Article and Find Full Text PDF

The metal-insulator (MI) transition of vanadium dioxide (VO) is effectively modulated by oxygen vacancies, which decrease the transition temperature and insulating resistance. Oxygen vacancies in thin films can be driven by oxygen transport using electrochemical potential. This study delves into the role of crystallographic channels in VO in facilitating oxygen transport and the subsequent tuning of electrical properties.

View Article and Find Full Text PDF

In atomically thin van der Waals materials, grain boundaries-the line defects between adjacent crystal grains with tilted in-plane rotations-are omnipresent. When the tilting angles are arbitrary, the grain boundaries form inhomogeneous sublattices, giving rise to local electronic states that are not controlled. Here we report on epitaxial realizations of deterministic MoS mirror twin boundaries (MTBs) at which two adjoining crystals are reflection mirroring by an exactly 60° rotation by position-controlled epitaxy.

View Article and Find Full Text PDF

In next-generation neuromorphic computing applications, the primary challenge lies in achieving energy-efficient and reliable memristors while minimizing their energy consumption to a level comparable to that of biological synapses. In this work, hexagonal boron nitride (h-BN)-based metal-insulator-semiconductor (MIS) memristors operating is presented at the attojoule-level tailored for high-performance artificial neural networks. The memristors benefit from a wafer-scale uniform h-BN resistive switching medium grown directly on a highly doped Si wafer using metal-organic chemical vapor deposition (MOCVD), resulting in outstanding reliability and low variability.

View Article and Find Full Text PDF

The utilization of an in-plane lattice misfit in an oxide epitaxially grown on another oxide with a different lattice parameter is a well-known approach to induce strains in oxide materials. However, achieving a sufficiently large misfit strain in this heteroepitaxial configuration is usually challenging, unless the thickness of the grown oxide is kept well below a critical value to prevent the formation of misfit dislocations at the interface for relaxation. Instead of adhering to this conventional approach, here, we employ nanometer-scale large strain fields built around misfit dislocations to examine the effects of two distinct types of strains─tension and compression─on the generation of oxygen vacancies in heteroepitaxial LaCoO films.

View Article and Find Full Text PDF

The octahedral symmetry in ionic crystals can play a critical role in atomic nucleation and migration during solid-solid phase transformation. Similarly, octahedron distortion, which is characterized by Goldschmidt tolerance factor, strongly influences the exsolution kinetics in the perovskite lattice framework during high-temperature annealing. However, a fundamental study on manipulating the exsolution process by octahedron distortion is still lacking.

View Article and Find Full Text PDF

Current-induced spin-orbit torque (SOT) offers substantial promise for the development of low-power, nonvolatile magnetic memory. Recently, a single-phase material concurrently exhibiting magnetism and the spin Hall effect has emerged as a scientifically and technologically interesting platform for realizing efficient and compact SOT systems. Here, we demonstrate external-magnetic-field-free switching of perpendicular magnetization in a single-phase ferromagnetic and spin Hall oxide SrRuO.

View Article and Find Full Text PDF

KTaO heterostructures have recently attracted attention as model systems to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating heterostructure interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on high-quality epitaxial (111) KTaO thin films using an adsorption-controlled hybrid PLD to overcome the vapor pressure mismatch.

View Article and Find Full Text PDF

In the early 2000s, low dimensional ferroelectric systems were predicted to have topologically nontrivial polar structures, such as vortices or skyrmions, depending on mechanical or electrical boundary conditions. A few variants of these structures have been experimentally observed in thin film model systems, where they are engineered by balancing electrostatic charge and elastic distortion energies. However, the measurement and classification of topological textures for general ferroelectric nanostructures have remained elusive, as it requires mapping the local polarization at the atomic scale in three dimensions.

View Article and Find Full Text PDF

Electrical manipulation of the metal-insulator transition (MIT) in quantum materials has attracted considerable attention toward the development of ultracompact neuromorphic devices because of their stimuli-triggered transformations. VO is expected to undergo abrupt electronic phase transition by piezo strain near room temperature; however, the unrestricted integration of defect-free VO films on piezoelectric substrates is required to fully exploit this emerging phenomenon in oxide heterostructures. Here, we demonstrate the integration of single-crystalline VO films on highly lattice-mismatched PMN-PT piezoelectric substrates using a single-crystal TiO-nanomembrane (NM) template.

View Article and Find Full Text PDF

Point defects dictate various physical, chemical, and optoelectronic properties of two-dimensional (2D) materials, and therefore, a rudimentary understanding of the formation and spatial distribution of point defects is a key to advancement in 2D material-based nanotechnology. In this work, we performed the demonstration to directly probe the point defects in 2H-MoTe monolayers that are tactically exposed to (i) 200 °C-vacuum-annealing and (ii) 532 nm-laser-illumination; and accordingly, we utilize a deep learning algorithm to classify and quantify the generated point defects. We discovered that tellurium-related defects are mainly generated in both 2H-MoTe samples; but interestingly, 200 °C-vacuum-annealing and 532 nm-laser-illumination modulate a strong n-type and strong p-type 2H-MoTe respectively.

View Article and Find Full Text PDF

Charge ordering (CO), characterized by a periodic modulation of electron density and lattice distortion, has been a fundamental topic in condensed matter physics, serving as a potential platform for inducing novel functional properties. The charge-ordered phase is known to occur in a doped system with high d-electron occupancy, rather than low occupancy. Here, we report the realization of the charge-ordered phase in electron-doped (100) SrTiO epitaxial thin films that have the lowest d-electron occupancy i.

View Article and Find Full Text PDF

Introduction: Advances in microfabrication, automation, and computer engineering seek to revolutionize small-scale devices and machines. Emerging trends in medicine point to smart devices that emulate the motility, biosensing abilities, and intelligence of cells and pathogens that inhabit the human body. Two important characteristics of smart medical devices are the capability to be deployed in small conduits, which necessitates being untethered, and the capacity to perform mechanized functions, which requires autonomous shape-changing.

View Article and Find Full Text PDF

Point defects often appear in two-dimensional (2D) materials and are mostly correlated with physical phenomena. The direct visualisation of point defects, followed by statistical inspection, is the most promising way to harness structure-modulated 2D materials. Here, we introduce a deep learning-based platform to identify the point defects in 2H-MoTe: synergy of unit cell detection and defect classification.

View Article and Find Full Text PDF

Postoperative chylous leak after esophagectomy is a rare but potentially life-threatening complication that results in hypovolemia, electrolyte imbalance, malnutrition, and immunologic deficiency. However, the management of postoperative chylous leak remains controversial. Following a diagnosis of esophageal cancer, a 64-year-old man was treated by video-assisted thoracoscopic esophagectomy, laparoscopic gastric tube formation, prophylactically thoracic duct ligation, and reconstruction with esophagogastrostomy at the neck level.

View Article and Find Full Text PDF

Pulmonary hamartoma is the most commonly resected benign neoplasm of lung. The mesenchymal cystic subtype is a rare and often bilaterally occurring variant composed of multiple cysts and nodules. Herein, we present an asymptomatic 70-year-old woman with a large and mostly cystic growth of right hilar region.

View Article and Find Full Text PDF

Retrograde catheter-induced coronary artery dissection during percutaneous coronary intervention is an exceedingly rare occurrence, and the likelihood of it extending into the aorta is even more uncommon. Typically, surgical treatment involves aortic root replacement combined with coronary artery bypass grafting. However, in this particular case, a meticulous approach was employed.

View Article and Find Full Text PDF

Nanotransfer printing (nTP) is one of the most promising nanopatterning methods given that it can be used to produce nano-to-micro patterns effectively with functionalities for electronic device applications. However, the nTP process is hindered by several critical obstacles, such as sub-20 nm mold technology, reliable large-area replication, and uniform transfer-printing of functional materials. Here, for the first time, a dual nanopatterning process is demonstrated that creates periodic sub-20 nm structures on the eight-inch wafer by the transfer-printing of patterned ultra-thin (<50 nm) block copolymer (BCP) film onto desired substrates.

View Article and Find Full Text PDF

The performance of nanocrystal (NC) catalysts could be maximized by introducing rationally designed heterointerfaces formed by the facet- and spatio-specific modification with other materials of desired size and thickness. However, such heterointerfaces are limited in scope and synthetically challenging. Herein, we applied a wet chemistry method to tunably deposit Pd and Ni on the available surfaces of porous 2D-Pt nanodendrites (NDs).

View Article and Find Full Text PDF

Spin-orbit torques generated by a spin current are key to magnetic switching in spintronic applications. The polarization of the spin current dictates the direction of switching required for energy-efficient devices. Conventionally, the polarizations of these spin currents are restricted to be along a certain direction due to the symmetry of the material allowing only for efficient in-plane magnetic switching.

View Article and Find Full Text PDF

We report a method to precisely control the atomic defects at grain boundaries (GBs) of monolayer MoS by vapor-liquid-solid (VLS) growth using sodium molybdate liquid alloys, which serve as growth catalysts to guide the formations of the thermodynamically most stable GB structure. The Mo-rich chemical environment of the alloys results in Mo-polar 5|7 defects with a yield exceeding 95%. The photoluminescence (PL) intensity of VLS-grown polycrystalline MoS films markedly exceeds that of the films, exhibiting abundant S 5|7 defects, which are kinetically driven by vapor-solid-solid growths.

View Article and Find Full Text PDF

Topological textures of ferroelectric polarizations have promise as alternative devices for future information technology. A polarization rotation inevitably deviates from the stable orientation in axial ferroelectrics, but local energy losses compromise the global symmetry, resulting in a distorted shape of the topological vortex or inhibiting the vortex. Easy planar isotropy helps to promote rotating structures and, accordingly, to facilitate access to nontrivial textures.

View Article and Find Full Text PDF

Industrial application of lead-free piezoelectric ceramics is prevented by intrinsic thermal instability. Herein, we propose a method to achieve outstanding thermal stability of converse piezoelectric constant () in lead-free potassium sodium niobate (KNN)-based ceramics by inducing a synergistic interaction between the grain size and polar configuration. Based on computational methods using phase-field simulations and first-principles calculations, the relationship between the grain size and polar configuration is demonstrated, and the possibility of achieving improved thermal stability in fine grains is suggested.

View Article and Find Full Text PDF

A PHP Error was encountered

Severity: Notice

Message: fwrite(): Write of 34 bytes failed with errno=28 No space left on device

Filename: drivers/Session_files_driver.php

Line Number: 272

Backtrace:

A PHP Error was encountered

Severity: Warning

Message: session_write_close(): Failed to write session data using user defined save handler. (session.save_path: /var/lib/php/sessions)

Filename: Unknown

Line Number: 0

Backtrace: