Does contemporary total knee designs replicate the anatomy of the native trochlea?

Purpose: Registry data shows that less surgeons are resurfacing the patella during total knee arthroplasty (TKA). This tendency highlights the importance of matching trochlear and native patellar anatomy. Currently, there is a lack of consensus on implant design that best accommodates native patellae.

Is suture-based cerclage biomechanically superior to traditional metallic cerclage for fixation of periprosthetic femoral fractures: A matched pair cadaveric study.

Background: While traditional metallic cerclage remains the primary method in clinical application, non-metallic cerclage systems have recently gained popularity due to low risks of soft tissue irritation and bone intrusion. The objective of this study was to assess the performance of a novel non-metallic suture-based cerclage in comparison to traditional metallic cerclage cables for fixation of periprosthetic femoral fractures.

Methods: An extended trochanteric osteotomy was performed on eight pairs of cadaveric femora, followed by reduction using either metallic cerclages (Group I) or the suture-based cerclage (Group II).

Impact of Prophylactic Cerclage Location on Femoral Fracture Propagation: A Biomechanical Study.

Objectives: Prophylactic cerclage cables are often placed intraoperatively about a fracture to prevent propagation. However, biomechanical data supporting optimal cable placement location are lacking. The objective of this study was to evaluate the impact of prophylactic cerclage placement location on the propagation of femoral shaft fractures.

Contributions of capsular releases to femoral exposure in total hip arthroplasty via the direct anterior approach.

Background: In total hip arthroplasty via the direct anterior approach, appropriate exposure is critical to allow preparation of the femur. The objective of this study was to explore the optimal soft tissue releases needed to allow broaching of the femur through a combination of experimental tests and computer simulations.

Methods: Fourteen full-body cadaveric specimens were included in this study.

Single-Strand "Short Isometric Construct" Medial Collateral Ligament Reconstruction Restores Valgus and Rotational Stability While Isolated Deep MCL and Superficial MCL Reconstruction Do Not.

Background: Historical MCL (medial collateral ligament) reconstruction (MCLR) techniques have focused on the superficial MCL (sMCL) to restore valgus stability while frequently ignoring the importance of the deep MCL (dMCL) in controlling tibial external rotation. The recent recognition of the medial ligament complex importance has multiple studies revisiting medial anatomy and questioning contemporary MCLR techniques.

Purpose: To assess whether (1) an isolated sMCL reconstruction (sMCLR), (2) an isolated dMCL reconstruction (dMCLR), or (3) a novel single-strand short isometric construct (SIC) would restore translational and rotational stability to a knee with a dMCL and sMCL injury.

The hidden impact of orthopedic surgeries: Examining the psychological consequences.

Orthopedic surgery is commonly considered "quality of life care," as most orthopedic procedures have been shown to provide excellent pain relief and successful surgical outcomes for patients. Although orthopedic surgeries continue to improve patients' functional outcomes through modern surgical techniques and preoperative psychological screening, variation in patient function persists in current studies. Sub-optimal function in patients has been shown to be associated with emotional health burdens, such as anxiety and depression.

Pelvic tilt affects superolateral coverage, but not superomedial coverage of the femoral head following periacetabular osteotomy.

Background: Pelvic tilt is an important sagittal parameter that varies greatly among individuals. The objective of this study was to quantify the effect of pelvic tilt on femoral head coverage and range of motion in a dysplastic population following periacetabular osteotomy.

Methods: Twenty-three dysplastic hips from 19 patients (17 female, 2 male) were included in this study.

Variations in Trochlear Morphology of Contemporary and Legacy Total Knee Arthroplasty Prostheses: A Review of 22 Designs.

Background: The morphology of the trochlear compartment of total knee arthroplasty (TKA) prostheses is a major determinant of postoperative patello-femoral kinematics, particularly with unresurfaced patellae. The objective of this study was to quantify and compare the trochlear morphology of a large series of contemporary and legacy TKA designs.

Methods: The 3-dimensional surface models of 22 femoral components (13 contemporary and 9 legacy) were created using high-resolution laser scanning.

A Cross-Source Point Cloud Registration Algorithm Based on Trigonometric Mutation Chaotic Harris Hawk Optimisation for Rockfill Dam Construction.

A high-precision three-dimensional (3D) model is the premise and vehicle of digitalising hydraulic engineering. Unmanned aerial vehicle (UAV) tilt photography and 3D laser scanning are widely used for 3D model reconstruction. Affected by the complex production environment, in a traditional 3D reconstruction based on a single surveying and mapping technology, it is difficult to simultaneously balance the rapid acquisition of high-precision 3D information and the accurate acquisition of multi-angle feature texture characteristics.

The Stability of Fixation of Vancouver B2 Periprosthetic Femoral Fractures: Effect of Implantation Technique.

Background: Due to increasing volume of total hip arthroplasties, periprosthetic femoral fractures have become a common complication with increased revision burden and perioperative morbidity. The objective of this study was to evaluate the fixation stability of Vancouver B2 fractures treated with 2 techniques.

Methods: A common B2 fracture was created by reviewing 30 type B2 cases.

Systemic Inflammation Markers Associated with Bone Mineral Density in perimenopausal and Postmenopausal Women.

Objective: The aim of this research was to determine whether systemic inflammatory indicators, including aggregate index of systemic inflammation (AISI), neutrophils lymphocyte to platelet ratio (NLPR), systemic immune-inflammation index (SII), and systemic inflammation response index (SIRI), are related to bone mineral density (BMD) in perimenopausal and postmenopausal women.

Methods: One hundred and eighty-one perimenopausal and 390 postmenopausal women were enrolled in this cross-sectional study. Continuous variables by analysis of variance and Kruskal Wallis test for comparing the clinical characteristics.

Genetically predicted iron status was associated with the risk of prostate cancer.

Introduction: Observational studies have reported a relationship between iron status and the risk of prostate cancer. However, it remains uncertain whether the association is causal or due to confounding or reverse causality. To further clarify the underlying causal relationship, we conducted a Mendelian randomization (MR) analysis.

Insulin-like peptide 5 (INSL5) positively correlates with anti-Müllerian hormone (AMH) in women with the polycystic ovary syndrome: a case-control study.

Background: Insulin-like peptide 5 (INSL5) is involved in both reproductive and metabolic processes in polycystic ovary syndrome (PCOS). This study aimed to evaluate the relationship between INSL5 and anti-Müllerian hormone (AMH).

Methods: A retrospective case-control study was conducted in a university-based reproductive centre between December 2019 and January 2021.

Prevalence and Risk Factors of Workplace Violence Against Emergency Department Nurses in China.

We aim to find out the prevalence, characteristics, and predictors of workplace violence (WPV) against current Chinese emergency department (ED) nurses. A cross-sectional survey of 20,136 ED nurses was conducted in 31 provinces in China between July and September 2019. Descriptive analyses were used to examine the prevalence and characteristics of WPV.

Fabrication and characterization of biodegradable Zn scaffold by vacuum heating-press sintering for bone repair.

Bone repair materials with excellent mechanical properties are highly desirable, especially in load-bearing sits. However, the currently used ceramic- and polymer-based ones mainly show poor mechanical properties. Recently, biodegradable metals have attracted extensive attention due to their reliable mechanical strength and degradability.

The Length of Diaphyseal Contact of Tapered Fluted Stems is Highly Dependent on Canal Morphology.

Background: Diaphyseal fixation remains the mainstay of revision THA. The stability of diaphyseal fixation can be quantified by the extent of contact between the stem and the endosteal cortex. This is highly affected by the morphology of the proximal femur.

Contemporary Robotic Systems in Total Knee Arthroplasty: A Review of Accuracy and Outcomes.

The success of total knee arthroplasty (TKA) depends on restoration of the stability and biomechanical efficiency of the native knee. The emergence of robotic surgical technologies has greatly increased the precision and reproducibility. We discuss contemporary robotic TKA systems by reviewing the features of the individual platforms, their accuracy, and the clinical outcomes.

Micromotion and Migration of Cementless Tibial Trays Under Functional Loading Conditions.

Background: The outcome of cementless total knee arthroplasty (TKA) relies on successful bony ingrowth into the implant surfaces. Failures due to aseptic loosening are still reported, especially in younger and more active patients. The objective of this study is to quantify the micromotion of a commercially available design of cementless tibial tray under loading conditions simulating walking and stair descent.

The continuum of hip range of motion: From soft-tissue restriction to bony impingement.

Traditional studies of hip kinematics have not identified which anatomic structures limit the range of motion (ROM) when the hip is placed in different maneuvers. In this study, we attempted to answer two questions: (a) During which maneuvers is the motion of the hip limited by bony impingement between the femur and pelvis? (b) When is hip ROM determined by the constraint of soft tissues and to what extent? ROM of eight cadaveric hips was measured in 17 maneuvers using a motion capture system. The maneuvers were recreated in silico using 3D CT models of each specimen to detect the occurrence of bony impingement.

How Flat Is the Tibial Osteotomy in Total Knee Arthroplasty?

Background: Cementless total knee arthroplasty has been developed to decrease the incidence of failure in younger and more active patients. However, failures are still more common in cementless versus cemented components. It is hypothesized that this is triggered by incomplete bone-tray contact.

Pelvic Tilt and Range of Motion in Hips With Femoroacetabular Impingement Syndrome.

Introduction: Physiotherapy is a management option for the treatment of femoroacetabular impingement (FAI) syndrome. This study examines the influence of changes in pelvic tilt and hip adduction on the range of motion (ROM) of the hip.

Methods: Ten FAI hips were used to simulate impingement at two positions: (1) 20° internal rotation (IR) with 100° flexion and 10° adduction and (2) 40° IR with 35° flexion and 10° adduction; the amount of IR was measured at the point of bony impingement or to the defined limit.

Total Knee Arthroplasty in the Osteoporotic Tibia: A Biomechanical Evaluation of the Role of Stem Extensions and Cementing Techniques.

Introduction: Poor functional outcomes and aseptic loosening increase when total knee arthroplasty is performed on osteoporotic patients. This biomechanical study evaluated the effect of stem extension on the stability of tibial fixation using different cementing techniques.

Methods: A standard design tibial tray was implanted in a replica of a male osteoporotic tibia.

The envelope of active hip motion in different sporting, recreational, and daily-living activities: A systematic review.

Background: In treating patients with limitations of hip motion, it is generally assumed that correction of bony morphology will provide the patient with the joint motion required to resume their activities. However, the positions of impingement and the specific excursions of joint motion required by each sport may vary. This systematic review aimed to define the envelope of active hip joint motion for participation in different sporting, recreational, and daily-living activities.

Does Capsular Laxity Lead to Microinstability of the Native Hip?

Background: Hip "microinstability" is commonly cited as the cause of symptoms that occur in the presence of translation of the femoral head away from conformity with the acetabular fossa. However, there is still no consistent objective criteria defining its presence and biomechanical basis. One hypothesis is that abnormal motion of the articular surfaces occurs because of capsular laxity, ultimately leading to clinical symptoms.

Is digital photography an accurate and precise method for measuring range of motion of the shoulder and elbow?

Background: Accurate measurements of shoulder and elbow motion are required for the management of musculoskeletal pathology. The purpose of this investigation was to compare three techniques for measuring motion. The authors hypothesized that digital photography would be equivalent in accuracy and show higher precision compared to the other two techniques.