Insights Into the Role of π-Electrons of Aromatic Aldehydes in Passivating Perovskite Defects.

Carbonyl-containing aromatic ketones or aldehydes have been demonstrated to be effective defect passivators for perovskite films to improve performances of perovskite solar cells (PSCs). It has been claimed that both π-electrons within aromatic units and carbonyl groups can, separately, interact with ionic defects, which, however, causes troubles in understanding the passivation mechanism of those aromatic ketone/aldehyde molecules. Herein, we clarify the effect of both moieties in one molecule on the defect passivation by investigating three aromatic aldehydes with varied conjugation planes, namely, biphenyl-4-carbaldehyde (BPCA), naphthalene-2-carbaldehyde (NACA) and pyrene-1-carbaldehyde (PyCA).

Spatial Conformation Engineering of Aromatic Ketones for Highly Efficient and Stable Perovskite Solar Cells.

Carbonyl-containing materials employed in state-of-the-art hybrid lead halide perovskite solar cells (PSCs) exhibit a strong structure-dependent electron donor effect that predominates in defect passivation. However, the impact of the molecular spatial conformation on the efficacy of carbonyl-containing passivators remains ambiguous, hindering the advancement of molecular design for passivating materials. Herein, we show that altering the spatial torsion angle of aromatic ketones from twisted to planar configurations, as seen in benzophenone (BP, 27.

Enhancing the Efficiency and Stability of Inverted Perovskite Solar Cells and Modules through Top Interface Modification with N-type Semiconductors.

The interface modification between perovskite and electron transport layer (ETL) plays a crucial role in achieving high performance inverted perovskite photovoltaics (i-PPVs). Herein, non-fullerene acceptors (NFAs), known as Y6-BO and Y7-BO, were utilized to modify the perovskite/ETL interface in i-PPVs. Non-polar solvent-soluble NFAs can effectively passivate surface defects without structural damage of the underlying perovskite films.

Unraveling the Role of Electron-Withdrawing Molecules for Highly Efficient and Stable Perovskite Photovoltaics.

Electron-withdrawing molecules (EWMs) have exhibited remarkable efficacy in boosting the performance of perovskite solar cells (PSCs). However, the underneath mechanisms governing their positive attributes remain inadequately understood. Herein, we conducted a comprehensive study on EWMs by comparing 2,2'-(2,5-cyclohexadiene-1,4-diylidene) bismalononitrile (TCNQ) and (2,3,5,6-tetrafluoro-2,5-cyclohexadiene-1,4-diylidene) dimalononitrile (F4TCNQ) employed at the perovskite/hole transport layer (HTL) interfaces.

Tailored Supramolecular Interactions in Host-Guest Complexation for Efficient and Stable Perovskite Solar Cells and Modules.

Host-guest complexation offers a promising approach for mitigating surface defects in perovskite solar cells (PSCs). Crown ethers are the most widely used macrocyclic hosts for complexing perovskite surfaces, yet their supramolecular interactions and functional implications require further understanding. Here we show that the dipole moment of crown ethers serves as an indicator of supramolecular interactions with both perovskites and precursor salts.

Oxygen Vacancy Mediation in SnO Electron Transport Layers Enables Efficient, Stable, and Scalable Perovskite Solar Cells.

Previous findings have suggested a close association between oxygen vacancies in SnO and charge carrier recombination as well as perovskite decomposition at the perovskite/SnO interface. Underlying the fundamental mechanism holds great significance in achieving a more favorable balance between the efficiency and stability. In this study, we prepared three SnO samples with different oxygen vacancy concentrations and observed that a low oxygen vacancy concentration is conducive to long-term device stability.

Anion Binding Interaction Enhances the Robustness of Iodide for High-Performance Perovskite Solar Cells.

Owing to the ionic bond nature of the Pb-I bond, the iodide at the interface of perovskite polycrystalline films was easily lost during the preparation process, resulting in the formation of a large number of iodine vacancy defects. The presence of iodine vacancy defects can cause nonradiative recombination, provide a pathway for iodide migration, and be harmful to the power conversion efficiency (PCE) and stability of organic-inorganic hybrid perovskite solar cells (HPSCs). Here, in order to increase the robustness of iodides at the interface, a strategy to introduce anion binding effects was developed to stabilize the perovskite films.

Chemical Reaction of FA Cations Enables Efficient and Stable Perovskite Solar Cells.

Organometal halide perovskite solar cells (PSCs) have received great attention owing to a rapid increase in power conversion efficiency (PCE) over the last decade. However, the deficit of long-term stability is a major obstacle to the implementation of PSCs in commercialization. The defects in perovskite films are considered as one of the primary causes.

Intragrain impurity annihilation for highly efficient and stable perovskite solar cells.

Intragrain impurities can impart detrimental effects on the efficiency and stability of perovskite solar cells, but they are indiscernible to conventional characterizations and thus remain unexplored. Using in situ scanning transmission electron microscopy, we reveal that intragrain impurity nano-clusters inherited from either the solution synthesis or post-synthesis storage can revert to perovskites upon irradiation stimuli, leading to the counterintuitive amendment of crystalline grains. In conjunction with computational modelling, we atomically resolve crystallographic transformation modes for the annihilation of intragrain impurity nano-clusters and probe their impacts on optoelectronic properties.

Suppressing Element Inhomogeneity Enables 14.9% Efficiency CZTSSe Solar Cells.

Kesterites, CuZnSn(SSe ) (CZTSSe), solar cells suffer from severe open-circuit voltage (V) loss due to the numerous secondary phases and defects. The prevailing notion attributes this issue to Sn-loss during the selenization. However, this work unveils that, instead of Sn-loss, elemental inhomogeneity caused by Cu-directional diffusion toward Mo(S,Se) layer is the critical factor in the formation of secondary phases and defects.

Enhanced Quasi-Fermi Level Splitting of Perovskite Solar Cells by Universal Dual-Functional Polymer.

Perovskite solar cells (PSCs) have attracted extensive attention due to their higher power conversion efficiency (PCE) and simple fabrication process. However, the open-circuit voltage (V) loss remains a significant impediment to enhance device performance. Here, a facile strategy to boost the V to 95.

Interfacial Rivet to Fill Structural Defects: A Spacer Engineering Gift for 3D Solar Cells.

The combination of 2D and 3D perovskites to passivate surfaces or interfaces with a high concentration of defects shows great promise for improving the efficiency of perovskite solar cells (PSCs). Constructing high-quality perovskite film systems by precisely modulating 2D perovskites with good morphologies and growth sites on 3D perovskite films remains a formidable challenge due to the complexity of spacer-engineered surface reactions. In this study, phase-pure 2D (HA)(MA)PbI perovskites with a controlled number of layers (n) are separated on a large scale and exploited as interface rivets to optimize 3D perovskite films, resulting in tunable film structural defects and grain boundaries.

Regulating Hetero-Nucleation Enabling Over 14% Efficient Kesterite Solar Cells.

Developing well-crystallized light-absorbing layers remains a formidable challenge in the progression of kesterite CuZnSn(S,Se) (CZTSSe) solar cells. A critical aspect of optimizing CZTSSe lies in accurately governing the high-temperature selenization reaction. This process is intricate and demanding, with underlying mechanisms requiring further comprehension.

Understanding the Role of Fluorine Groups in Passivating Defects for Perovskite Solar Cells.

Introducing fluorine (F) groups into a passivator plays an important role in enhancing the defect passivation effect for the perovskite film, which is usually attributed to the direct interaction of F and defect states. However, the interaction between electronegative F and electron-rich passivation groups in the same molecule, which may influence the passivation effect, is ignored. We herein report that such interactions can vary the electron cloud distribution around the passivation groups and thus changing their coordination with defect sites.

Thermally Crosslinked F-rich Polymer to Inhibit Lead Leakage for Sustainable Perovskite Solar Cells and Modules.

High-performance perovskite solar cells have demonstrated commercial viability, but still face the risk of contamination from lead leakage and long-term stability problems caused by defects. Here, an organic small molecule (octafluoro-1,6-hexanediol diacrylate) is introduced into the perovskite film to form a polymer through in situ thermal crosslinking, of which the carbonyl group anchors the uncoordinated Pb of perovskite and reduces the leakage of lead, along with the -CF - hydrophobic group protecting the Pb from water invasion. Additionally, the polymer passivates varieties of Pb-related and I-related defects through coordination and hydrogen bonding interactions, regulating the crystallization of perovskite film with reduced trap density, releasing lattice strain, and promoting carrier transport and extraction.

Molecular Dipole Engineering of Carbonyl Additives for Efficient and Stable Perovskite Solar Cells.

Carbonyl functional materials as additives are extensively applied to reduce the defects density of the perovskite film. However, there is still a lack of comprehensive understanding for the effect of carbonyl additives to improve device performance. In this work, we systematically study the effect of carbonyl additive molecules on the passivation of defects in perovskite films.

Polymerization Strategies to Construct a 3D Polymer Passivation Network toward High Performance Perovskite Solar Cells.

The spontaneously formed uncoordinated Pb defects usually make the perovskite films demonstrate strong n-type with relatively lower carrier diffusion length and serious non-radiative recombination energy loss. In this work, we adopt different polymerization strategies to construct three-dimensional passivation frameworks in the perovskite layer. Thanks to the strong C≡N⋅⋅⋅Pb coordination bonding and the penetrating passivation structure, the defect state density is obviously reduced, accompanied by a significant increase in the carrier diffusion length.

Thermally Crosslinked Hole Conductor Enables Stable Inverted Perovskite Solar Cells with 23.9% Efficiency.

Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) represents the state-of-the-art hole transport material (HTM) in inverted perovskite solar cells (PSCs). However, unsatisfied surface properties of PTAA and high energy disorder in the bulk film hinder the further enhancement of device performance. Herein, a simple small molecule 10-(4-(3,6-dimethoxy-9H-carbazol-9-yl)phenyl)-3,7-bis(4-vinylphenyl)-10H-phenoxazine (MCz-VPOZ) is strategically developed for in situ fabrication of polymer hole conductor (CL-MCz) via a facile and low-temperature cross-linking technology.

A Multifunctional Polymer as an Interfacial Layer for Efficient and Stable Perovskite Solar Cells.

Metal-cation defects and halogen-anion defects in perovskite films are critical to the efficiency and stability of perovskite solar cells (PSCs). In this work, a random polymer, poly(methyl methacrylate-co-acrylamide) (PMMA-AM), was synthesized to serve as an interfacial passivation layer for synergistically passivating the under-coordinated Pb and anchor the I of the [PbI ] octahedron. Additionally, the interfacial PMMA-AM passivation layer cannot be destroyed during the hole transport layer deposition because of its low solubility in chlorobenzene.

Ammonia for post-healing of formamidinium-based Perovskite films.

Solvents employed for perovskite film fabrication not only play important roles in dissolving the precursors but also participate in crystallization process. High boiling point aprotic solvents with O-donor ligands have been extensively studied, but the formation of a highly uniform halide perovskite film still requires the participation of additives or an additional step to accelerate the nucleation rate. The volatile aliphatic methylamine with both coordinating ligands and hydrogen protons as solvent or post-healing gas facilitates the process of methylamine-based perovskite films with high crystallinity, few defects, and easy large-scale fabrication as well.

Pressure-Assisted Space-Confinement Strategy to Eliminate PbI in Perovskite Layers toward Improved Operational Stability.

The existence of the PbI phase in the perovskite film is normally inevitable because of the easy sublimation of the organic component during the crystallization process under a relatively high annealing temperature. However, excess PbI will cause significant degradation on open current voltage () and fill factor (FF) under continuous illumination. Here, we developed a pressure-assisted space-confinement (PASC) method to enhance the phase purity of the perovskite film fabricated by the two-step spin-coating method.

Atomically Resolved Electrically Active Intragrain Interfaces in Perovskite Semiconductors.

Deciphering the atomic and electronic structures of interfaces is key to developing state-of-the-art perovskite semiconductors. However, conventional characterization techniques have limited previous studies mainly to grain-boundary interfaces, whereas the intragrain-interface microstructures and their electronic properties have been much less revealed. Herein using scanning transmission electron microscopy, we resolved the atomic-scale structural information on three prototypical intragrain interfaces, unraveling intriguing features clearly different from those from previous observations based on standalone films or nanomaterial samples.

Polyacrylonitrile-Coordinated Perovskite Solar Cell with Open-Circuit Voltage Exceeding 1.23 V.

In solution-processed organic-inorganic halide perovskite films, halide-anion related defects including halide vacancies and interstitial defects can easily form at the surfaces and grain boundaries. The uncoordinated lead cations produce defect levels within the band gap, and the excess iodides disturb the interfacial carrier transport. Thus these defects lead to severe nonradiative recombination, hysteresis, and large energy loss in the device.

Carrier Diffusion and Recombination Anisotropy in the MAPbI Single Crystal.

MAPbI, one of the archetypical metal halide perovskites, is an exciting semiconductor for a variety of optoelectronic applications. The photoexcited charge-carrier diffusion and recombination are important metrics in optoelectronic devices. Defects in grain interiors and boundaries of MAPbI films cause significant nonradiative recombination energy losses.