Formulate Adaptive Biphasic Scaffold via Sequential Protein-Instructed Peptide Co-Assembly.

To ensure compositional consistency while mitigating potential immunogenicity for stem cell therapy, synthetic scaffolds have emerged as compelling alternatives to native extracellular matrix (ECM). Substantial progress has been made in emulating specific natural traits featuring consistent chemical compositions and physical structures. However, recapitulating the dynamic responsiveness of the native ECM involving chemical transitions and physical remodeling during differentiation, remains a challenging endeavor.

Construction of the single-diamond-structured titania scaffold-Recreation of the holy grail photonic structure.

As one of the most stunning biological nanostructures, the single-diamond (SD) surface discovered in beetles and weevils exoskeletons possesses the widest complete photonic bandgap known to date and is renowned as the "holy grail" of photonic materials. However, the synthesis of SD is difficult due to its thermodynamical instability compared to the energetically favoured bicontinuous double diamond and other easily formed lattices; thus, the artificial fabrication of SD has long been a formidable challenge. Herein, we report a bottom-up approach to fabricate SD titania networks via a one-pot cooperative assembly scenario employing the diblock copolymer poly(ethylene oxide)--polystyrene as a soft template and titanium diisopropoxide bis(acetylacetonate) as an inorganic precursor in a mixed solvent, in which the SD scaffold was obtained by kinetically controlled nucleation and growth in the skeletal channels of the diamond minimal surface formed by the polymer matrix.

NOAEL cancer therapy: a tumor targetable docetaxel-inorganic polymer nanohybrid prevents drug-induced neutropenia.

To date, cancer therapies largely consist of five pillars: surgery, radiation, chemotherapy, targeted therapy, and immunotherapy. Still, researchers are trying to innovate the current cancer therapies to pursue an ideal one without side effects. For developing such a therapy, we designed a chemically well-defined route to a PEG- and docetaxel (DTX)-conjugated inorganic polymer, polyphosphazene, named "polytaxel (PTX)" with a prolonged blood circulation time and tumor localization.

Control cell migration by engineering integrin ligand assembly.

Advances in mechanistic understanding of integrin-mediated adhesion highlight the importance of precise control of ligand presentation in directing cell migration. Top-down nanopatterning limited the spatial presentation to sub-micron placing restrictions on both fundamental study and biomedical applications. To break the constraint, here we propose a bottom-up nanofabrication strategy to enhance the spatial resolution to the molecular level using simple formulation that is applicable as treatment agent.

Direct Observation Techniques Using Scanning Electron Microscope for Hydrothermally Synthesized Nanocrystals and Nanoclusters.

Metal oxide nanocrystals have garnered significant attention owing to their unique properties, including luminescence, ferroelectricity, and catalytic activity. Among the various synthetic methods, hydrothermal synthesis is a promising method for synthesizing metal oxide nanocrystals and nanoclusters. Because the shape and surface structure of the nanocrystals largely affect their properties, their analytical methods should be developed.

Lipid-Raft-Targeted Molecular Self-Assembly Inactivates YAP to Treat Ovarian Cancer.

The Yes-associated protein (YAP) is a major oncoprotein responsible for cell proliferation control. YAP's oncogenic activity is regulated by both the Hippo kinase cascade and uniquely by a mechanical-force-induced actin remodeling process. Inspired by reports that ovarian cancer cells specifically accumulate the phosphatase protein ALPP on lipid rafts that physically link to actin cytoskeleton, we developed a molecular self-assembly (MSA) technology that selectively halts cancer cell proliferation by inactivating YAP.

Mechanoresponsive Alignment of Molecular Self-Assembled Negatively Charged Nanofibrils.

Inspired by the mechanoresponsive orientation of actin filaments in cell, we introduce a design paradigm of synthetic molecular self-assembling fibrils that respond to external mechanical force by transforming from a macroscopically disorder state to a highly ordered uniaxial aligned state. The incorporation of aromatic-containing amino acids and negatively charged amino acids lead to self-assembly motifs that transform into uniform nanofibrils in acidic solution. Adjusting the pH level of aqueous solution introduces optimal negative charge to the surface of self-assembling nanofibrils inducing long-range electrostatic repulsion forming a nematic phase.

Investigation of the Image Contrast in an Ultra-Low Voltage Scanning Electron Microscope Using an Auger Electron Spectrometer.

Surface-sensitive information on a bulk sample can be obtained by using a low incident electron energy (low accelerating voltage/landing voltage) in a scanning electron microscope (SEM). However, topography and composition contrast obtained at low incident electron energies may not be intuitive and should be analyzed carefully. By combining an Auger electron spectrometer (AES) with a low incident electron energy SEM (LE-SEM), we investigated the SEM contrast carefully by separating the secondary electron (SE) and back-scattered electron (BSE) components with high accuracy.

A novel geopolymer route to porous carbon: high CO adsorption capacity.

The nanostructure and morphology of mesoporous carbon obtained from a newly designed porous geopolymer template were characterized by low-voltage high-resolution scanning electron microscopy. The present porous carbon exhibited a large specific surface area and pore volume, resulting in a high CO2 uptake capacity.

Scanning Electron Microscopy (SEM) Energy Dispersive X-ray Spectroscopy (EDS) Mapping and In-situ Observation of Carbonization of Culms of Bambusa Multiplex.

Green culms of bamboo and charcoal of Bambusa multiplex were investigated by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) mapping. A dynamic observation of the initial stage of carbonization was also performed in-situ by heating a radial longitudinal section of the bamboo culm at a rate of 20°C/min up to 500°C. EDS mapping of the green bamboo culms detected Si signals in the harder cells such as the epidermis (Ep), cortex (Cor) and vascular bundle sheath (Bs) and between these cells as silicon oxide particles.

Structural investigations on green culms and charcoal of Bambusa multiplex.

Green culms of Bambusa multiplex and the bamboo charcoal carbonized from the green culms at 700°C have been studied by means of X-ray diffraction, X-ray fluorescent element analysis, analytical scanning electron microscopy, and analytical scanning transmission electron microscopy (STEM), aiming at industrial applications as raw materials for functional devices and substances. It is revealed that the green culms and the charcoal contain a significant amount of Si, in particular, ∼18 wt % in the skin. The green culms comprise amorphous and crystalline celluloses.

Surface-Casting Synthesis of Mesoporous Zirconia with a CMK-5-Like Structure and High Surface Area.

About 15 years ago, the Ryoo group described the synthesis of CMK-5, a material consisting of a hexagonal arrangement of carbon nanotubes. Extension of the surface casting synthesis to oxide compositions, however, was not possible so far, in spite of many attempts. Here it is demonstrated, that crystalline mesoporous hollow zirconia materials with very high surface areas up to 400 m  g , and in selected cases in the form of CMK-5-like, are indeed accessible via such a surface casting process.

Direct Observation of the Outermost Surfaces of Mesoporous Silica Thin Films by High Resolution Ultralow Voltage Scanning Electron Microscopy.

The properties of the outermost surfaces of mesoporous silica thin films are critical in determining their functions. Obtaining information on the presence or absence of silica layers on the film surfaces and on the degree of mesopore opening is essential for applications of surface mesopores. In this study, the outermost surfaces of mesoporous silica thin films with 3-dimensional orthorhombic and 2-dimensional hexagonal structures were observed using ultralow voltage high resolution scanning electron microscopy (HR-SEM) with decelerating optics.

A Co₃O₄-embedded porous ZnO rhombic dodecahedron prepared using zeolitic imidazolate frameworks as precursors for CO₂ photoreduction.

Metal-organic frameworks (MOFs) are attracting considerable attention for their use as both the precursor and the template to prepare metal oxides or carbon-based materials. For the first time in this paper, the core-shell ZIF-8@ZIF-67 crystals are thermally converted into porous ZnO@Co3O4 composites by combining a seed-mediated growth process with a two-step calcination. The designed porous ZnO@Co3O4 composites exhibited the highest photocatalytic activity with an excellent stability for the reduction of CO2 among the commonly reported composite photocatalysts.

Metamorphic GaAs/GaAsBi Heterostructured Nanowires.

GaAs/GaAsBi coaxial multishell nanowires were grown by molecular beam epitaxy. Introducing Bi results in a characteristic nanowire surface morphology with strong roughening. Elemental mappings clearly show the formation of the GaAsBi shell with inhomogeneous Bi distributions within the layer surrounded by the outermost GaAs, having a strong structural disorder at the wire surface.

Optically Active Nanostructured ZnO Films.

Inorganic nanomaterials endowed with hierarchical chirality could open new horizons in physical theory and applications because of their fascinating properties. Here, we report chiral ZnO films coated on quartz substrates with a hierarchical nanostructure ranging from atomic to micrometer scale. Three levels of hierarchical chirality exist in the ZnO films: helical ZnO crystalline structures that form primary helically coiled nanoplates, secondary helical stacking of these nanoplates, and tertiary nanoscale circinate aggregates formed by several stacked nanoplates.

Mesoscopic constructs of ordered and oriented metal-organic frameworks on plasmonic silver nanocrystals.

We enclose octahedral silver nanocrystals (Ag NCs) in metal-organic frameworks (MOFs) to make mesoscopic constructs O(h)-nano-Ag⊂MOF in which the interface between the Ag and the MOF is pristine and the MOF is ordered (crystalline) and oriented on the Ag NCs. This is achieved by atomic layer deposition of aluminum oxide on Ag NCs and addition of a tetra-topic porphyrin-based linker, 4,4',4″,4‴-(porphyrin-5,10,15,20-tetrayl)tetrabenzoic acid (H4TCPP), to react with alumina and make MOF [Al2(OH)2TCPP] enclosures around Ag NCs. Alumina thickness is precisely controlled from 0.

Synthesis of hierarchical zeolites using an inexpensive mono-quaternary ammonium surfactant as mesoporogen.

A simple amphiphilic surfactant containing a mono-quaternary ammonium head group (N-methylpiperidine) is effective in imparting substantial mesoporosity during synthesis of SSZ-13 and ZSM-5 zeolites. Highly mesoporous SSZ-13 prepared in this manner shows greatly improved catalytic performance in the methanol-to-olefins reaction compared to bulk SSZ-13.

Optically active chiral CuO "nanoflowers".

Helical symmetry can be found in most flowers with a rotation of contort petal aestivation. For micro- and nanoscale analogies, flower mimicking structures have been reproduced; however, the conceptual chirality of "nanoflowers" has not yet been defined. Here, the chirality of the "flower" was defined by its nanosized chiral structure and consequent optical activity (OA), opening new horizons for the physical theory and chiral materials.

Synthesis of chiral metal oxide complexes with tunable electron transition-based optical activity.

Chiral metal oxide complexes with tunable optical response to circularly polarised light over the full range of the UV-Vis absorption band were synthesised. This optical activity was attributed to electronic transitions from the ground state to the excited state or from the valence band to the conduction band under an asymmetric electric field.

Cobalt phosphate-modified barium-doped tantalum nitride nanorod photoanode with 1.5% solar energy conversion efficiency.

Spurred by the decreased availability of fossil fuels and global warming, the idea of converting solar energy into clean fuels has been widely recognized. Hydrogen produced by photoelectrochemical water splitting using sunlight could provide a carbon dioxide lean fuel as an alternative to fossil fuels. A major challenge in photoelectrochemical water splitting is to develop an efficient photoanode that can stably oxidize water into oxygen.

A review of fine structures of nanoporous materials as evidenced by microscopic methods.

This paper reviews diverse capabilities offered by modern electron microscopy techniques in studying fine structures of nanoporous crystals such as zeolites, silica mesoporous crystals, metal organic frameworks and yolk-shell materials. For the case of silica mesoporous crystals, new approaches that have been developed recently to determine the three-dimensionally periodic average structure, e.g.

Synthesis of chiral TiO₂ nanofibre with electron transition-based optical activity.

The optical chirality induced at the absorption bands due to electronic exciton coupling of the transition dipole moments between chromophores in close proximity is ubiquitous in helical organic materials. However, inorganic materials with optical activity resulting from electronic transitions have not been explored. Here we report the synthesis of chiral TiO(2) fibres via transcription of the helical structure of amino acid-derived amphiphile fibres through coordination bonding interactions between the organics and the TiO(2) source.

Synthesis of self-pillared zeolite nanosheets by repetitive branching.

Hierarchical zeolites are a class of microporous catalysts and adsorbents that also contain mesopores, which allow for fast transport of bulky molecules and thereby enable improved performance in petrochemical and biomass processing. We used repetitive branching during one-step hydrothermal crystal growth to synthesize a new hierarchical zeolite made of orthogonally connected microporous nanosheets. The nanosheets are 2 nanometers thick and contain a network of 0.

Large-pore apertures in a series of metal-organic frameworks.

We report a strategy to expand the pore aperture of metal-organic frameworks (MOFs) into a previously unattained size regime (>32 angstroms). Specifically, the systematic expansion of a well-known MOF structure, MOF-74, from its original link of one phenylene ring (I) to two, three, four, five, six, seven, nine, and eleven (II to XI, respectively), afforded an isoreticular series of MOF-74 structures (termed IRMOF-74-I to XI) with pore apertures ranging from 14 to 98 angstroms. All members of this series have noninterpenetrating structures and exhibit robust architectures, as evidenced by their permanent porosity and high thermal stability (up to 300°C).