Lignin-containing Nanocellulose for in situ Chemical-Free Synthesis of AgAu-based Nanoparticles with Potent Antibacterial Activities.

Lignin-containing nanocelluloses (LNCs) have the properties of both lignin and nanocellulose and could overcome the limits of both individual components in metallic nanoparticle synthesis. However, studies on LNCs are still limited, and the potential of such nanomaterials for metallic nanoparticle synthesis has not been fully unraveled. In this study, monometallic silver, gold nanoparticles, and Ag-Au-AgCl nanohybrids were synthesized in situ utilizing LNCs in a chemical-free approach.

Direct-from-sputum rapid phenotypic drug susceptibility test for mycobacteria.

Background: The spread of multi-drug resistant tuberculosis (MDR-TB) is a leading global public-health challenge. Because not all biological mechanisms of resistance are known, culture-based (phenotypic) drug-susceptibility testing (DST) provides important information that influences clinical decision-making. Current phenotypic tests typically require pre-culture to ensure bacterial loads are at a testable level (taking 2-4 weeks) followed by 10-14 days to confirm growth or lack thereof.

Quantitative assessment of reflux in commercially available needle-free IV connectors.

Introduction: Blood reflux is caused by changes in pressure within intravascular catheters upon connection or disconnection of a syringe or intravenous tubing from a needle-free connector (NFC). Changes in pressure, differing with each brand of NFC, may result in fluid movement and blood reflux that can contribute to intraluminal catheter occlusions and increase the potential for central-line associated bloodstream infections (CLABSI).

Methods: In this study, 14 NFC brands representing each of the four market-categories of NFCs were selected for evaluation of fluid movement occurring during connection and disconnection of a syringe.

Rapid culture-based detection of living mycobacteria using microchannel electrical impedance spectroscopy (m-EIS).

Background: Multiple techniques exist for detecting Mycobacteria, each having its own advantages and drawbacks. Among them, automated culture-based systems like the BACTEC-MGIT™ are popular because they are inexpensive, reliable and highly accurate. However, they have a relatively long "time-to-detection" (TTD).

Foaming Betadine Spray as a potential agent for non-labor-intensive preoperative surgical site preparation.

Background: The Centers for Disease Control and Prevention's (CDC) National Healthcare Safety Network (NHSN) report published in 2009 shows that there were about 16,000 cases of surgical site infection (SSI) following ~ 850,000 operative procedures making SSI one of the most predominant infection amongst nosocomial infections. Preoperative skin preparation is a standard procedure utilized to prevent SSIs thereby improving patient outcomes and controlling associated healthcare costs. Multiple techniques/ products have been used for pre-operative skin preparation, like 2 step scrubbing and painting, 2 step scrubbing and drying, and 1 step painting with a drying time.

Sunlight-assisted route to antimicrobial plasmonic aminoclay catalysts.

We present a straightforward, environmentally-benign, one-pot photochemical route to generate alloyed AgAu bimetallic nanoparticle decorated aminoclays in water at room temperature. The protocol uses no reducing agent (e.g.

Coatings and surface modifications imparting antimicrobial activity to orthopedic implants.

Bacterial colonization and biofilm formation on an orthopedic implant surface is one of the worst possible outcomes of orthopedic intervention in terms of both patient prognosis and healthcare costs. Making the problem even more vexing is the fact that infections are often caused by events beyond the control of the operating surgeon and may manifest weeks to months after the initial surgery. Herein, we review the costs and consequences of implant infection as well as the methods of prevention and management.

Ultra-rapid elimination of biofilms via the combustion of a nanoenergetic coating.

Background: Biofilms occur on a wide variety of surfaces including metals, ceramics, glass etc. and often leads to accumulation of large number of various microorganisms on the surfaces. This biofilm growth is highly undesirable in most cases as biofilms can cause degradation of the instruments and its performance along with contamination of the samples being processed in those systems.

Ultrafine sputter-deposited Pt nanoparticles for triiodide reduction in dye-sensitized solar cells: impact of nanoparticle size, crystallinity and surface coverage on catalytic activity.

This paper presents a detailed electrochemical impedance spectroscopy and cyclic voltammetry (CV) investigation into the electrocatalytic activity of ultrafine (i.e., smaller than 2 nm) platinum (Pt) nanoparticles generated on a fluorine-doped tin oxide (FTO) surface via room temperature tilted target sputter deposition.

Kinetically limited differential centrifugation as an inexpensive and readily available alternative to centrifugal elutriation.

When separating two species with similar densities but differing sedimentation velocities (because of differences in size), centrifugal elutriation is generally the method of choice. However, a major drawback to this approach is the requirement for specialized equipment. Here, we present a new method that achieves similar separations using standard benchtop centrifuges by loading the seperands as a layer on top of a dense buffer of a specified length, and running the benchtop centrifugation process for a calculated amount of time, thereby ensuring that all faster moving species are collected at the bottom, while all slower moving species remain in the buffer.

Capture of circulating tumor cells using photoacoustic flowmetry and two phase flow.

Melanoma is the deadliest form of skin cancer, yet current diagnostic methods are unable to detect early onset of metastatic disease. Patients must wait until macroscopic secondary tumors form before malignancy can be diagnosed and treatment prescribed. Detection of cells that have broken off the original tumor and travel through the blood or lymph system can provide data for diagnosing and monitoring metastatic disease.

Sputter-deposition of silver nanoparticles into ionic liquid as a sacrificial reservoir in antimicrobial organosilicate nanocomposite coatings.

We present a new approach for fabricating robust, regenerable antimicrobial coatings containing an ionic liquid (IL) phase incorporating silver nanoparticles (AgNPs) as a reservoir for Ag(0)/Ag(+) species within sol-gel-derived nanocomposite films integrating organosilicate nanoparticles. The IL serves as an ultralow volatility (vacuum-compatible) liquid target, allowing for the direct deposition and dispersion of a high-density AgNP "ionosol" following conventional sputtering techniques. Two like-anion ILs were investigated in this work: methyltrioctylammonium bis(trifluoromethylsulfonyl)imide, [N(8881)][Tf(2)N], and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [emim][Tf(2)N].

Detection and isolation of circulating melanoma cells using photoacoustic flowmetry.

Circulating tumor cells (CTCs) are those cells that have separated from a macroscopic tumor and spread through the blood and lymph systems to seed secondary tumors(1,2,3). CTCs are indicators of metastatic disease and their detection in blood samples may be used to diagnose cancer and monitor a patient's response to therapy. Since CTCs are rare, comprising about one tumor cell among billions of normal blood cells in advanced cancer patients, their detection and enumeration is a difficult task.

Development and in vitro studies of a polyethylene terephthalate-gold nanoparticle scaffold for improved biocompatibility.

Polyethylene terephthalate (PET) mesh is one of the most commonly used synthetic biomaterials for tension-free hernia repair. In an effort to improve the biocompatibility of PET mesh, gold nanoparticles (AuNP) in various concentrations were conjugated to the PET surface to develop PET-AuNP scaffolds. These novel scaffolds were characterized with Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) to assess the addition of functional groups, presence of AuNPs, and thermal stability of the modified PET mesh, respectively.

Novel electrical method for early detection of viable bacteria in blood cultures.

We present a novel electrical method for detecting viable bacteria in blood cultures that is 4 to 10 times faster than continuous monitoring blood culture systems (CMBCS) like the Bactec system. Proliferating bacteria are detected via an increase in the bulk capacitance of suspensions, and the threshold concentration for detection is ∼ 10(4) CFU/ml (compared to ∼ 10(8) CFU/ml for the Bactec system).

Rapid on-chip genetic detection microfluidic platform for real world applications.

The development of genetic detection protocols for field applications is an important aspect of modern medical diagnostic technology and environmental monitoring. In this paper, we report a rapid, portable, and inexpensive DNA hybridization technique using a bead-based microfluidic platform that functions by passing fluorescently labeled target DNA through a chamber packed with functionalized beads within a microfluidic channel. DNA hybridization is then assessed using a digital camera attached to a Clare Chemical DR-45M dark reader non-UV transilluminator that uses visible light as an excitation source and a blue and amber filter to reveal fluorescence.

Concentration control for protein crystallization via a continuously-fed crystallization chamber.

A continuously-fed crystallization chamber that allows for kinetic path control through the crystallization phase diagram (from labile/nucleation to metastable/growth) was fabricated and used to crystallize lysozyme. A lumped kinetic model was developed, and parameters for heterogeneous nucleation kinetics were determined. Heterogeneous nucleation was found to have faster nucleation kinetics and slower growth kinetics than homogeneous nucleation, as expected.

Bovine red blood cell starvation age discrimination through a glutaraldehyde-amplified dielectrophoretic approach with buffer selection and membrane cross-linking.

We report a novel buffer electric and dielectric relaxation time tuning technique, coupled with a glutaraldehyde (Glt.) cross-linking cell fixation reaction that allows for sensitive dielectrophoretic analysis and discrimination of bovine red blood cells of different starvation age. Guided by a single-shell oblate spheroid model, a zwitterion buffer composition is selected to ensure that two measurable crossover frequencies (cof's) near 500 kHz exist for dielectrophoresis (DEP) within a small range of each other.

A micro-scale multi-frequency reactance measurement technique to detect bacterial growth at low bio-particle concentrations.

The technique described enables the user to detect the presence and proliferation of bacteria through an increase in the bulk capacitance (C) of the suspension, which is proportional to the bacteria count, at practical frequencies less than 1 MHz. The geometry of the micro-capillary design employed increases the bulk resistance (R) of the medium, thus increasing its RC time. This makes the measured reactance sensitive to changes in the bulk capacitance, which is usually masked by the much larger surface capacitance.

Application of the lag-after-pulsed-separation (LAPS) flow meter to different protein solutions.

A lag after pulsed separation (LAPS) meter was previously developed to measure flow rates of protein solutions. The LAPS meter operates on the time-of-flight principle. An upstream event (electrophoretic concentration of the particles in one section of the device) is detected downstream (by change in ac resistance).

Sliding-cavity fluid contactors in low-gravity fluids, materials, and biotechnology research.

The well-known method of sliding-cavity fluid contactors used by Gosting for diffusion measurements and by Tiselius in electrophoresis has found considerable use in low-gravity research. To date, sliding-cavity contactors have been used in liquid diffusion experiments, interfacial transport experiments, biomolecular crystal growth, biphasic extraction, multistage extraction, microencapsulation, seed germination, invertebrate development, and thin-film casting. Sliding-cavity technology has several advantages for spaceflight: it is simple, it accommodates small samples, samples can be fully enclosed, phases can be combined, multiple samples can be processed at high sample density, real-time observations can be made, and mixed and diffused samples can be compared.

Multistage electrophoresis II: treatment of a kinetic separation as a pseudoequilibrium process.

An electrophoresis device is described which separates cells, particles, proteins and other separands by collecting samples having decreasing electrophoretic mobility in a train of inverted cavities while an electric field is applied between the inverted cavities and a sample cuvette containing a mixture of cells, particles, proteins or other separands. A circular plate is provided for the inverted cavities, and this circular plate is rotated to collect fractions. The system utilizes an innovative purification method that combines free electrophoresis and multistage extraction in an instrument capable of separating living cells, particles, and proteins in useful quantities at high concentrations.