Comparison of Sagittal Condylar Guidance Angle Obtained by Radiographic Methods and Manual Programming of Articulators in Dentate Patients - A Clinico-radiographic Study.

Background: The ultimate goal of advanced procedures in prosthetic dentistry is to construct a prosthesis based on the accurate reproduction of condylar guidance.

Aim: To compare the sagittal condylar inclination obtained using the cone-beam computed tomography (CBCT), panoramic image, and two articulator systems.

Settings And Design: A cross-sectional study was carried out in 20 dentate patients in the age group of 20-40 years.

Cytotoxicity of dental cement on soft tissue associated with dental implants at different time intervals.

Background: To investigate and compare the effect of four commercially used dental cement at 24 hours, 48 hours,72 hours (h) and 6 days on the cellular response of human gingival fibroblast (HGF).

Methods: 3 cement pellet samples were made for each 4-test cement (n=12). The cement used for this study were zinc phosphate (ZP), zinc oxide non-eugenol (ZOE), RelyX U200 (RU200), and glass ionomer cement (GIC).

A Nonlinear Three-Dimensional Finite Element Analysis of Stress Distribution and Microstrain Evaluation in Short Dental Implants with Three Different Implant-Abutment Connections in Single and Splinted Conditions in the Posterior Mandible.

Background: Stress distribution plays a vital role in the longevity and success of implant-supported prosthesis. This study evaluated the von Mises stress and microstrain in the peri-implant bone and the implant-abutment junction of short dental implants with three different implant-abutment connections in splinted and unsplinted conditions using finite element analysis (FEA).

Materials And Methods: In this experimental study, nine transversely isotropic finite element models were developed, and randomly divided into three equal groups (n = 3): control, (Group AC) single-standard 4.

An In Vitro Study on the Shear Bond Strength of Feldspathic Porcelain to Nickel Chromium Alloy and Cobalt Chromium Alloy after Various Surface Treatments.

Background: To evaluate and compare the shear bond strength of feldspathic porcelain to four distinctively surface-treated Ni-Cr and Co-Cr alloys and to assess the impact of oxidation-heat treatment on porcelain to base metal alloy bond strength.

Methods: 40 specimens each of nickel-chromium alloy and cobalt-chromium alloy were cast. A total of four groups of specimens were created.

Effect of Different Surface Treatments on the Micro-Shear Bond Strength and Surface Characteristics of Zirconia: An In Vitro Study.

Purpose: To study the effect of different surface treatments on the micro-shear bond strength and surface characteristics of zirconia.

Methods: Two types of zirconia ceramics were tested: opaque (O) and translucent (T). Each type of zirconia was further allotted into four groups based on the type of surface treatment method.

Biomechanical Stress Analysis of Platform Switch Implants of Varying Diameters on Different Densities of Bone.

Purpose: The purpose of this study was to evaluate and compare the strain developed in D2 and D3 types of bones on vertical loading by platform switch implants of different diameters.

Materials And Methods: Implants of diameters 3.25 mm, 4.

Cytotoxicity of Dental Cements on Soft Tissue Associated with Dental Implants.

Purpose: To investigate and compare the cellular host response of human gingival fibroblasts (HGF) on four currently used cements. . 5 cement pellet samples were made for each of the 4 test cements ( = 20).

Evaluation of Stress Generated with Different Abutment Materials and Angulations under Axial and Oblique Loading in the Anterior Maxilla: Three-Dimensional Finite Element Analysis.

Purpose: The aim of this study was to assess and correlate the stress distribution in an anterior maxillary implant-supported prosthesis with 0°(degree), 15°, and 25° angulated titanium and zirconia abutments using a three-dimensional (3D) finite element analysis (FEA).

Materials And Methods: Six FEA models consisting of a dentate anterior maxilla with a single bone-level implant of dimension 4.2 × 10 mm placed in the region of left maxillary central incisor and abutments of dimension 4.

Effect of post etching cleansing on surface microstructure, surface topography, and microshear bond strength of lithium disilicate.

Aim: This study assessed the effect of postetch cleansing on the surface microstructure, surface topography, and microshear bond strength (μSBS) of lithium disilicate and the resin cement.

Setting And Design: analytical study.

Materials And Methods: Fifteen discs (10 mm diameter and 2 mm thickness) were fabricated from highly translucent lithium disilicate IPS Emax 2 ceramic (Ivoclar Vivadent, Schaan, Liechtenstein).

Evaluation of chemical disinfection and microwave irradiation on denture base materials: An study.

Objective: This study evaluated the effect of chemical disinfection and microwave irradiation on the surface hardness and roughness of two commercially available hard relining materials (Ufi Gel hard, GC Kooliner) and one denture base resin (Trevalon).

Materials And Methods: A total of 72 specimens (n = 24) were divided into four groups. C: Not disinfected, Cl: disinfected with 4% chlorhexidine solution, Gl: disinfected with 2% glutaraldehyde solution, Mw: disinfected with microwave irradiation (650 W; 6 min).

A Comparative Evaluation of Stress Distribution with Two Attachment Systems of Varying Heights in a Mandibular Implant-Supported Overdenture: A Three-Dimensional Finite Element Analysis.

Purpose: To analyze and compare the stress distribution in an implant-retained overdenture complex using ball and Locator attachments of three heights by means of a 3D finite element analysis (FEA).

Materials And Methods: Six finite element models comprising an edentulous mandible with two interforaminal bone-level implants and ball attachments of heights 1 mm (A1), 3 mm (A3), and 5 mm (A5), and Locator attachments of heights 1 mm (B1), 3 mm (B3), and 5 mm (B5), were designed using ANSYS Workbench Software. Unilateral vertical (100 N) and oblique loads (100 N at 30° to the longitudinal axis of the implant in buccolingual direction) were applied.

Osseodensification - A novel approach in implant dentistry.

Primary stability in dental implants is an essential factor for achieving successful osseointegration. Surgical procedure and bone quality are among the most common factors that affect primary stability. It is also crucial to achieve high-insertion torque which is important for obtaining primary stability.

Indirect Sinus Lift Done Using "Autogenous Core Lift" Technique in Combination with Alloplastic Phosphosilicate Putty in Atrophic Maxillary Posterior Region: A Clinical Report with 1-Year Follow-Up.

Pneumatization of the sinus is a common occurrence after extraction of maxillary posterior teeth. Implant procedures require a clinically acceptable level of bone to be present for implants to be placed in function. Residual bone with >4 mm of height can be managed using the indirect sinus lift procedure, whereas bone height <4 mm requires a direct sinus lift using lateral window approach.

Microbial assessment of dental unit waterlines in an institutional setup in Karnataka, South India.

Background And Aim: Biofilms in dental unit waterlines (DUWLs), suction hoses, and fittings are a potentially significant source of cross-contamination posing significant health risk as these may come into contact with patients during treatment. The purpose of this in vitro study was to identify the spectrum of bacterial flora colonizing the DUWLs and to detect pathogenic microorganisms present in such an environmental niche.

Materials And Methods: Thirty DUWL samples were collected from in use dental units selected randomly from various clinical departments.

Evaluation of effect of recasting of nickel-chromium alloy on its castability using different investment materials: An in vitro study.

Context: Castability has been found to be affected by many aspects of the entire casting system. Very few references in dental literature are available regarding recasting of the base metal alloys.

Aims: To evaluate and compare the castability of fresh and reused nickel-chromium alloy and to evaluate the effect of two brands of investment materials on castability of nickel-chromium alloy.

An Interdisciplinary Approach in Rehabilitation of an Adult Mutilated Dentition with Multiple Missing Permanent Teeth--A Case Report.

Adult orthodontics has been an area of increasing focus in recent times. Comprehensive treatment of adults is more challenging due to a myriad of problems that coexist in an adult that makes treatment planning more challenging. A large number of individuals seek dental care because of aesthetic reasons, that is, the desire to look more attractive by improving their smiles.

Comparative evaluation of antifungal action of tea tree oil, chlorhexidine gluconate and fluconazole on heat polymerized acrylic denture base resin - an in vitro study.

Objective: Candida albicans-associated denture stomatitis is the most common type of denture stomatitis seen in denture wearers. This study evaluates and compares the antifungal action of fluconazole, chlorhexidine gluconate and tea tree oil on heat-polymerised denture base resin, which has been previously contaminated with C. albicans grown in BHI broth.

Resilient liners: a review.

Resilient liners when used intelligently are an excellent adjunct in removable prosthodontics. However, currently they have to be best considered as temporary expedients because none of the advocated permanent liners have life expectancy comparable to resin denture base. This article reviews the literature regarding their composition, functions, gelation characteristics, bond strength and influence on denture bases.

An evaluation of shade differences between natural anterior teeth in different age groups and gender using commercially available shade guides.

Shade selection with the help of shade guides and color matching the restorations to the natural dentition continues to be one of the most perplexing and frustrating problems in fixed prosthodontics. The purpose of the study was to evaluate the shade differences of the natural anterior teeth in different age groups and gender, within the cross sectional Bangalore, Karnataka population, using commercially available shade guides. The shade of a cross section of the population comprising of 400 subjects of both the sexes (800 incisors; 400 maxillary central incisors; 400 mandibular central incisors) visiting the outpatient Department of Government Dental College was selected randomly and evaluated visually by a single observer using three commonly used shade guides i.

Prosthetic rehabilitation of a patient after partial maxillectomy: A clinical report.

Malignant melanoma of the oral cavity is very rare. This clinical report describes a method for prosthetic rehabilitation of a patient with malignant melanoma of the palate following partial maxillectomy with a closed hollow interim obturator.

Prosthetic rehabilitation of a patient after partial rhinectomy: a clinical report.

Carcinoma of the nasal vestibule often requires radical surgical excision, which results in total or partial loss of the nose followed by radiation therapy. A noninvasive, cost-effective technique for rehabilitation of a patient with squamous cell carcinoma of the nasal vestibule following partial rhinectomy and radiation therapy using heat-polymerizing clear acrylic resin is presented.