Vat Photopolymerization Additive Manufacturing of WC-Co Hardmetals Enabled by In Situ Polymerization-Induced Microencapsulation.

The additive manufacturing of hardmetals has attracted great attention recently but faces significant challenges in low printing resolution and low mechanical strength. Herein, the fabrication of hardmetal parts with complex structures and high surface quality by vat photopolymerization assisted with a sintering process has been achieved. This was enabled by in situ polymerization-induced microencapsulation of WC powder, which simultaneously enhances the photocuring ability and sedimentation stability of the WC-Co slurry.

Digital light processing printing of non-modified protein-only compositions.

This study explores the utilization of digital light processing (DLP) printing to fabricate complex structures using native gelatin as the sole structural component for applications in biological implants. Unlike approaches relying on synthetic materials or chemically modified biopolymers, this research harnesses the inherent properties of gelatin to create biocompatible structures. The printing process is based on a crosslinking mechanism using a di-tyrosine formation initiated by visible light irradiation.

Photocurable Sol-Gel Formulations for the Fabrication of Titanium Carbide/Carbon Nanocomposites via Digital Light Processing.

Additive manufacturing of carbide materials has received significant attention in the past years due to the ability to fabricate complex structures over different length scales. However, the typical limitations for powder-laden inks, such as nozzle clogging, rheological and geometric constraints, particle sedimentation, light-scattering and absorbing phenomena, narrow the range of available processes to manufacture carbide materials via conventional particle-based systems. To address these shortcomings, we have developed a one-pot synthetic route for the preparation of sol-gel-based UV-photocurable formulations, aiming at the fabrication of titanium carbide/carbon nanocomposites using digital light processing printing, pointing to potential applications in the field of nuclear physics.

Tunable Lotus Leaf Effect by Three-Dimensionally Printed Stretchable Objects.

Adjustable wettability is important for various fields, such as droplet manipulation and controlled surface adhesion. Herein, we present high-resolution 3D stretchable structures with tunable superhydrophobicity, fabricated by a stereolithography-based printing process. The printing compositions comprise nonfluorinated monomers based on silicone urethane with dispersed hydrophobic silica particles.

Continuous Material Deposition on Filaments in Fused Deposition Modeling.

A novel approach, i.e., Continuous Material Deposition on Filaments (CMDF), for the incorporation of active materials within 3D-printed structures is presented.

Applications of a vacuum-actuated multi-material hybrid soft gripper: lessons learnt from RoboSoft manipulation challenge.

Soft grippers are garnering increasing attention for their adeptness in conforming to diverse objects, particularly delicate items, without warranting precise force control. This attribute proves especially beneficial in unstructured environments and dynamic tasks such as food handling. Human hands, owing to their elevated dexterity and precise motor control, exhibit the ability to delicately manipulate complex food items, such as small or fragile objects, by dynamically adjusting their grasping configurations.

3D printing by stereolithography using thermal initiators.

Additive manufacturing technologies based on stereolithography rely on initiating spatial photopolymerization by using photoinitiators activated by UV-visible light. Many applications requiring printing in water are limited since water-soluble photoinitiators are scarce, and their price is skyrocketing. On the contrary, thermal initiators are widely used in the chemical industry for polymerization processes due to their low cost and simplicity of initiation by heat at low temperatures.

Intracranial Assessment of Androgen Receptor Antagonists in Mice Bearing Human Glioblastoma Implants.

The median survival time of patients with an aggressive brain tumor, glioblastoma, is still poor due to ineffective treatment. The discovery of androgen receptor (AR) expression in 56% of cases offers a potential breakthrough. AR antagonists, including bicalutamide and enzalutamide, induce dose-dependent cell death in glioblastoma and glioblastoma-initiating cell lines (GIC).

3D Printing of Self-Healing Materials.

This review article presents a comprehensive overview of the latest advances in the field of 3D printable structures with self-healing properties. Three-dimensional printing (3DP) is a versatile technology that enables the rapid manufacturing of complex geometric structures with precision and functionality not previously attainable. However, the application of 3DP technology is still limited by the availability of materials with customizable properties specifically designed for additive manufacturing.

Additive Manufacturing of Transparent Multi-Component Nanoporous Glasses.

Fabrication of glass with complex geocd the low resolution of particle-based or fused glass technologies. Herein, a high-resolution 3D printing of transparent nanoporous glass is presented, by the combination of transparent photo-curable sol-gel printing compositions and digital light processing (DLP) technology. Multi-component glass, including binary (Al O -SiO ), ternary (ZnO-Al O -SiO , TiO -Al O -SiO ), and quaternary oxide (CaO-P O -Al O -SiO ) nanoporous glass objects with complex shapes, high spatial resolutions, and multi-oxide chemical compositions are fabricated, by DLP printing and subsequent sintering process.

Fully Recyclable Cured Polymers for Sustainable 3D Printing.

The most prevalent materials used in the Additive Manufacturing era are polymers and plastics. Unfortunately, these materials are recognized for their negative environmental impact as they are primarily nonrecyclable, resulting in environmental pollution. In recent years, a new sustainable alternative to these materials has been emerging: Reversible Covalent Bond-Containing Polymers (RCBPs).

ZnO Quantum Photoinitiators as an All-in-One Solution for Multifunctional Photopolymer Nanocomposites.

Nanocomposites are constructed from a matrix material combined with dispersed nanosized filler particles. Such a combination yields a powerful ability to tailor the desired mechanical, optical, electrical, thermodynamic, and antimicrobial material properties. Colloidal semiconductor nanocrystals (SCNCs) are exciting potential fillers, as they display size-, shape-, and composition-controlled properties and are easily embedded in diverse matrices.

Performance upgrade of a microbial explosives' sensor strain by screening a high throughput saturation library of a transcriptional regulator.

We present a methodology for a high-throughput screening (HTS) of transcription factor libraries, based on bacterial cells and GFP fluorescence. The method is demonstrated on the LysR-type transcriptional regulator YhaJ, a key element in 2,4-dinitrotuluene (DNT) detection by bacterial explosives' sensor strains. Enhancing the performance characteristics of the YhaJ transcription factor is essential for future standoff detection of buried landmines.

3D printing stretchable and compressible porous structures by polymerizable emulsions for soft robotics.

UV-curable 3D printing compositions for the fabrication of stretchable and flexible porous structures for soft robotics are presented. The stereolithography-based printing compositions are water-in-oil (W/O) emulsions in which water droplets are the pore-forming material, and the continuous phase is a stretchable polyurethane diacrylate (PUA). The porosity of the printed objects is controlled by the material's micro-porosity and by the macro-porosity obtained by a cellular design.

Sensing in Soft Robotics.

Soft robotics is an exciting field of science and technology that enables robots to manipulate objects with human-like dexterity. Soft robots can handle delicate objects with care, access remote areas, and offer realistic feedback on their handling performance. However, increased dexterity and mechanical compliance of soft robots come with the need for accurate control of the position and shape of these robots.

Jointless Bioinspired Soft Robotics by Harnessing Micro and Macroporosity.

Although natural continuum structures, such as the boneless elephant trunk, provide inspiration for new versatile grippers, highly deformable, jointless, and multidimensional actuation has still not been achieved. The challenging pivotal requisites are to avoid sudden changes in stiffness, combined with the capability of providing reliable large deformations in different directions. This research addresses these two challenges by harnessing porosity at two levels: material and design.

Introduction to nanomaterials for printed electronics.

An introduction to the themed collection on nanomaterials for printed electronics, featuring exciting research on a variety of nanomaterials and techniques used for printed electronics.

E-Textile by Printing an All-through Penetrating Copper Complex Ink.

Wearable electronics is an emerging field in academics and industry, in which electronic devices, such as smartwatches and sensors, are printed or embedded within textiles. The electrical circuits in electronics textile (e-textile) should withstand many cycles of bending and stretching. Direct printing of conductive inks enables the patterning of electrical circuits; however, while using conventional nanoparticle-based inks, printing onto the fabric results in a thin layer of a conductor, which is not sufficiently robust and impairs the reliability required for practical applications.

Tetra-Dentate Cycloaddition Catalysts for Rapid Photopolymerization Reactions.

[4 + 4] and [2 + 2] cycloadditions are unique reactions since they form and deform cycloadducts under irradiation due to their inherent reversible nature. Whereas promising for the field of recycling, these reactions usually suffer from two major shortcomings: long reaction durations (hours) and the requirement of high-intensity light (∼100 W/cm), typically at a short wavelength (<330 nm). We demonstrate several tetra-dentate catalysts that can overcome these fundamental limitations.

Technology Roadmap for Flexible Sensors.

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited.

Angle-independent solar radiation capture by 3D printed lattice structures for efficient photoelectrochemical water splitting.

Photoelectrochemical water splitting is one of the sustainable routes to renewable hydrogen production. One of the challenges to deploying photoelectrochemical (PEC) based electrolyzers is the difficulty in the effective capture of solar radiation as the illumination angle changes throughout the day. Herein, we demonstrate a method for the angle-independent capture of solar irradiation by using transparent 3 dimensional (3D) lattice structures as the photoanode in PEC water splitting.

One-step double network hydrogels of photocurable monomers and bacterial cellulose fibers.

Soft-tissue replacements are challenging due to the stringent compliance requirements for the implanted materials in terms of biocompatibility, durability, high wear resistance, low friction, and water content. Acrylate hydrogels are worth considering as soft tissue implants as they can be photocurable and sustain customized shapes through 3D bioprinting. However, acrylate-based hydrogels present weak mechanical properties and significant dimensional changes when immersed in liquids.

Novel Transparent TiO/AgNW-Si(NH)/PET Hybrid Films for Flexible Smart Windows.

The application of flexible indium tin oxide (ITO)-free electrochromic devices (FCDs) has always been a research hotspot in flexible electronics. Recently, a silver nanowire (AgNW)-based transparent conductive film has raised great interest as an ITO-free substrate for FCDs. However, several challenges, such as the weak binding of AgNWs to the substrate, high junction resistance, and oxidation of AgNWs, remain.

Two-dimensional mesoporous nitrogen-rich carbon nanosheets loaded with CeO nanoclusters as nanozymes for the electrochemical detection of superoxide anions in HepG2 cells.

Two-dimensional (2D) porous carbon-based composite nanosheets loaded with metal oxide nanoclusters are expected to be promising electrocatalysts for high-performance electrochemical sensors. However, for this complicated composite material, strict reaction conditions and complex synthesis steps limit its general application in electrochemical detection. Here we present a facile method to fabricate 2D mesoporous nitrogen-rich carbon nanosheets loaded with CeO nanoclusters (2D-mNC@CeO), for fabricating superoxide anions (O) electrochemical sensor.