Antibacterial effect of new photocatalytically active "complex oxides/PMMA" composites under visible-light irradiation.

New photocatalytic materials based on complex oxides and a widely used and cheap polymer (PMMA) have been prepared. Among complex oxides previously investigated, the following have been used-RbTeWO, CsTeMoO, CsVTeO, NaVMoO, KVMoO. For comparison, the binary oxides TiO and WO were used.

Controlled electrodeposition of cobalt nanowires usingcompensation and their electron transport properties.

Superconducting hybrid structures based on single nanowires are a new type of nanoscale devices with peculiar transport characteristics. Control over the nanowire structure is essential for understanding hybrid electronic phenomena arising in such complex systems. In this work, we report a technique for the fabrication of cobalt nanowires by template-assisted electrodeposition usingcompensation, which allows revealing the fundamental dependence of the preferred direction of nanowire growth on the deposition potential.

The Effect of Zinc Oxide on DLP Hybrid Composite Manufacturability and Mechanical-Chemical Resistance.

The widespread use of epoxy resin (ER) in industry, owing to its excellent properties, aligns with the global shift toward greener resources and energy-efficient solutions, where utilizing metal oxides in 3D printed polymer parts can offer extended functionalities across various industries. ZnO concentrations in polyurethane acrylate composites impacted adhesion and thickness of DLP samples, with 1 wt.% achieving a thickness of 3.

High-Temperature, Lightweight Ceramics with Nano-Sized Ferrites for EMI Shielding: Synthesis, Characterisation, and Potential Applications.

The present study focuses on the synthesis and characterisation of a lightweight ceramic material with electromagnetic interference (EMI) shielding properties, achieved using mullite containing micrometre-sized hollow spheres (cenospheres) and CoFeO nanoparticles. This research explores compositions with varying CoFeO contents ranging from 0 up to 20 wt.%.

Preparation and Characteristics of High-Performance, Low-Density Metallo-Ceramics Composite.

By applying the physical vapour deposition method, hollow ceramic microspheres were coated with titanium, and subsequently, they were sintered using the spark plasma sintering technique to create a porous ceramic material that is lightweight and devoid of a matrix. The sintering process was carried out at temperatures ranging from 1050 to 1200 °C, with a holding time of 2 min. The samples were subjected to conventional thermal analyses (differential scanning calorimetry, thermogravimetry, dilatometry), oxidation resistance tests, and thermal diffusivity measurements.

I-Shaped Dimers of a Plant Chloroplast FF-ATP Synthase in Response to Changes in Ionic Strength.

F-type ATP synthases play a key role in oxidative and photophosphorylation processes generating adenosine triphosphate (ATP) for most biochemical reactions in living organisms. In contrast to the mitochondrial FF-ATP synthases, those of chloroplasts are known to be mostly monomers with approx. 15% fraction of oligomers interacting presumably non-specifically in a thylakoid membrane.

An investigation of the seasonal relationships between meteorological factors, water quality, and sporadic cases of Legionnaires' disease in Washington, DC.

Since the discovery of Legionnaires' disease (LD), limited progress has been made in understanding the epidemiology of sporadic cases of LD. Outbreaks have confirmed that air conditioning and potable water systems can be sources of community-acquired LD. However, studying the association between water quality and LD incidence has been challenging due to the heterogeneity of water systems across large geographic areas.

Excess mortality in Ukraine during the course of COVID-19 pandemic in 2020-2021.

In this work, the COVID-19 pandemic burden in Ukraine is investigated retrospectively using the excess mortality measures during 2020-2021. In particular, the epidemic impact on the Ukrainian population is studied via the standardized both all-cause and cause-specific mortality scores before and during the epidemic. The excess mortality counts during the pandemic were predicted based on historic data using parametric and nonparametric modeling and then compared with the actual reported counts to quantify the excess.

Physical, Thermal, and Chemical Properties of Fly Ash Cenospheres Obtained from Different Sources.

Cenospheres are hollow particles in fly ash, a by-product of coal burning, and are widely used as a reinforcement when developing low-density composites called syntactic foams. This study has investigated the physical, chemical, and thermal properties of cenospheres obtained from three different sources, designated as CS1, CS2, and CS3, for the development of syntactic foams. Cenospheres with particle sizes ranging from 40 to 500 μm were studied.

Numerical and experimental study of aerosol dispersion in the Do728 aircraft cabin.

Unlabelled: The dispersion of aerosols originating from one source, the 'index' passenger, within the cabin of the aircraft Do728 is studied experimentally using an aerosol-exhaling thermal manikin and in Reynolds-averaged Navier-Stokes simulations (RANS). The overall aim of the present study is the experimental determination of the aerosol spreading for the state-of-the-art mixing ventilation (MV) and to evaluate the potential of alternative ventilation concepts for controlling the aerosol spreading in RANS. For MV, the experiments showed that the ratio of inhaled to exhaled aerosol particles drops below 0.

Effect of Biocides on the Activity of Extracellular Enzymes Produced by Degrader Fungi from Technical Objects Used in Tropical Climates (Vietnam).

Activity of extracellular enzymes was assessed in 20 strains of microscopic fungi involved in biodegradation of technical objects exploited under tropical climate conditions (Vietnam). It was found that 19 strains possessed catalase activity, 18 strains had phenol oxidase activity, and eight strains had protease activity. The effect of industrial biocides on the activity of these enzymes was also assessed.

Spent Coffee Grounds Valorization in Biorefinery Context to Obtain Valuable Products Using Different Extraction Approaches and Solvents.

The valuable products that can be isolated from spent coffee ground (SCG) biomass consist of a high number of bioactive components, which are suitable for further application as raw materials in various production chains. This paper presents the potential value of the SCG obtained from large and local coffee beverage producers, for the production of valuable, biologically active products. Despite its high potential, SCG has not been utilized to its full potential value, but is instead discarded as waste in landfills.

Novel Efficient Multistage Lead Optimization Pipeline Experimentally Validated for DYRK1B Selective Inhibitors.

In addition to general challenges in drug discovery such as the identification of lead compounds in time- and cost-effective ways, specific challenges also exist. Particularly, it is necessary to develop pharmacological inhibitors that effectively discriminate between closely related molecular targets. DYRK1B kinase is considered a valuable target for cancer-specific mono- or combination chemotherapy; however, the inhibition of its closely related DYRK1A kinase is not beneficial.

Consortium of Indigenous Fecal Bacteria in the Treatment of Metabolic Syndrome.

The features of gut microbiota in metabolic syndrome (MS) and ways to correct it using autoprobiotics, based on indigenous bacteria obtained from fecal samples of the host, remain unexplored. The aim of the study was to investigate the effectiveness of an indigenous consortium (IC) of fecal bacteria in treatment of patients with MS. The study was carried out on 36 patients with MS, manifested with abdominal obesity, eating disorders, dyslipidemia, and hypertension.

Partners in crime: Tbf1 and Vid22 promote expansions of long human telomeric repeats at an interstitial chromosome position in yeast.

In humans, telomeric repeats (TTAGGG) are known to be present at internal chromosomal sites. These interstitial telomeric sequences (ITSs) are an important source of genomic instability, including repeat length polymorphism, but the molecular mechanisms responsible for this instability remain to be understood. Here, we studied the mechanisms responsible for expansions of human telomeric (Htel) repeats that were artificially inserted inside a yeast chromosome.

Revealing Josephson Vortex Dynamics in Proximity Junctions below Critical Current.

Made of a thin non-superconducting metal (N) sandwiched by two superconductors (S), SNS Josephson junctions enable novel quantum functionalities by mixing up the intrinsic electronic properties of N with the superconducting correlations induced from S by proximity. Electronic properties of these devices are governed by Andreev quasiparticles (Andreev, A. 1965, 20, 1490) which are absent in conventional SIS junctions whose insulating barrier (I) between the two S electrodes owns no electronic states.

Electrochemical Reduction of LaO, NdO, and CeO in LiCl-LiO Melt.

The reduction of pellets composed of individual CeO, NdO and a LaO-NdO-CeO mixture by lithium extracted on a cathode during lithium chloride electrolysis at 650 °C was studied. The methods of cyclic voltammetry, electron microscopy, including determination of the elemental composition of the studied objects, and X-ray diffraction analysis were applied for the present study. The reduction degree of rare-earth metal (REM) oxides was determined using both the bromine method and reduction melting of the samples in the graphite crucible.

Superconducting Bio-Inspired Au-Nanowire-Based Neurons.

High-performance modeling of neurophysiological processes is an urgent task that requires new approaches to information processing. In this context, two- and three-junction superconducting quantum interferometers with Josephson weak links based on gold nanowires are fabricated and investigated experimentally. The studied cells are proposed for the implementation of bio-inspired neurons-high-performance, energy-efficient, and compact elements of neuromorphic processor.

Excess mortality in Belarus during the COVID-19 pandemic as the case study of a country with limited non-pharmaceutical interventions and limited reporting.

Public health intervention to contain the ongoing COVID-19 pandemic significantly differed by country since the SARS-CoV-2 spread varied regionally in time and in scale. Since vaccinations were not available until the end of 2020 non-pharmaceutical interventions (NPIs) remained the only strategies to mitigate the pandemic spread at that time. Belarus in Europe is one of a few countries with a high Human Development Index where no lockdowns have ever been implemented and only limited NPIs have taken place for a period of time.

Dynamic Alloying of Steels in the Super-Deep Penetration Mode.

The dynamic effects observed in collisions represent a specific area of high-energy interaction located at the boundary of mechanics, hydrodynamics, shock wave physics, and alternating high-pressure regions. The paper shows that in the volume of a solid metal body, as a result of dynamic alloying by a high-speed stream of powder particles in the super-deep penetration mode (SDP), fiber structures of altering material arise, forming the framework of the composite material. The stream of powder particles in the metal obstacle following the path of least resistance and the impact of shock waves on particles results in a volumetric framework from the products of interaction between the injected and matrix materials.

Industry 4.0 and Digitalisation in Healthcare.

Industry 4.0 in healthcare involves use of a wide range of modern technologies including digitisation, artificial intelligence, user response data (ergonomics), human psychology, the Internet of Things, machine learning, big data mining, and augmented reality to name a few. The healthcare industry is undergoing a paradigm shift thanks to Industry 4.

Transcriptome-wide identification of RNA-binding protein binding sites using seCLIP-seq.

Discovery of interaction sites between RNA-binding proteins (RBPs) and their RNA targets plays a critical role in enabling our understanding of how these RBPs control RNA processing and regulation. Cross-linking and immunoprecipitation (CLIP) provides a generalizable, transcriptome-wide method by which RBP/RNA complexes are purified and sequenced to identify sites of intermolecular contact. By simplifying technical challenges in prior CLIP methods and incorporating the generation of and quantitative comparison against size-matched input controls, the single-end enhanced CLIP (seCLIP) protocol allows for the profiling of these interactions with high resolution, efficiency and scalability.

Identification of the global miR-130a targetome reveals a role for TBL1XR1 in hematopoietic stem cell self-renewal and t(8;21) AML.

Gene expression profiling and proteome analysis of normal and malignant hematopoietic stem cells (HSCs) point to shared core stemness properties. However, discordance between mRNA and protein signatures highlights an important role for post-transcriptional regulation by microRNAs (miRNAs) in governing this critical nexus. Here, we identify miR-130a as a regulator of HSC self-renewal and differentiation.

Application of Granular Biocomposites Based on Homogenised Peat for Absorption of Oil Products.

Among the various methods for collecting oil spills and oil products, including from the water surface, one of the most effective is the use of sorbents. In this work, three-component bio-based composite granular adsorbents were produced and studied for oil products' pollution collection. A bio-based binder made of peat, devulcanised crumb rubber from used tyres, and part fly ash as cenospheres were used for absorbent production.