Photocrosslinked Fish Collagen Peptide/Chitin Nanofiber Composite Hydrogels from Marine Resources: Preparation, Mechanical Properties, and an In Vitro Study.

Fish collagen peptide (FCP) is a water-soluble polymer with easy accessibility, bioactivity, and reactivity due to its solubility. The gelation of FCP can be carried out by chemical crosslinking, but the mechanical strength of FCP hydrogel is very low because of its intrinsically low molecular weight. Therefore, the mechanical properties of FCP gel should be improved for its wider application as a biomaterial.

Silylated Tag-Assisted Peptide Synthesis: Continuous One-Pot Elongation for the Production of Difficult Peptides under Environmentally Friendly Conditions.

Addition of the silylated tag (STag) enables peptides to be highly soluble in CPME, allowing them to be used at high concentrations in a coupling reaction to enhance reactivity and achieve effective synthesis of sterically hindered peptides. We described the development of a continuous one-pot STag-assisted peptide synthesis platform as a method that provides near-stoichiometric, speedy, environmentally friendly, and scalable peptide synthesis.

At-labeled immunoconjugate a one-pot three-component double click strategy: practical access to α-emission cancer radiotherapeutics.

α-Emission radiotherapeutics has potential to be one of most effective cancer therapeutics. Herein, we report a facile synthesis of an At-labeled immunoconjugate for use as an α-emission molecular targeting therapy. We synthesized a tetrazine probe modified with -decaborate(2-), a prosthetic group that forms a bioavailable stable complex with At.

Synthesis, thermal properties and cell-compatibility of photocrosslinked cinnamoyl-modified hydroxypropyl cellulose.

Biocompatibility of cinnamoyl-modified carbohydrate materials is not well-known, while they are attracting attention as a photoreactive material. In order to investigate biocompatible properties of cinnamoyl-modified carbohydrate, hydroxypropyl cellulose (HPC) was reacted with cinnamoyl chloride to yield cinnamoyl-modified HPC (HPC-C) for a cell proliferation test. HPC-Cs with three different degrees of substitution (DS) were prepared by changing a feed ratio of cinnamoyl chloride to HPC.

A One-Pot Three-Component Double-Click Method for Synthesis of [Cu]-Labeled Biomolecular Radiotherapeutics.

A one-pot three-component double-click process for preparing tumor-targeting agents for cancer radiotherapy is described here. By utilizing DOTA (or NOTA) containing tetrazines and the TCO-substituted aldehyde, the two click reactions, the tetrazine ligation (an inverse electron-demand Diels-Alder cycloaddition) and the RIKEN click (a rapid 6π-azaelectrocyclization), could simultaneously proceed under mild conditions to afford covalent attachment of the metal chelator DOTA or NOTA to biomolecules such as to albumin and anti-IGSF4 antibody without altering their activities. Subsequently, radiolabeling of DOTA- or NOTA-attached albumin and anti-IGSF4 antibody (an anti-tumor-targeting antibody) with [Cu], a β-emitting radionuclide, could be achieved in a highly efficient manner via a simple chelation with DOTA proving to be a more superior chelator than NOTA.

Photocrosslinkable Trehalose Derivatives Carrying Mesogenic Groups: Synthesis, Characterization, and in Vitro Evaluation for Fibroblast Attachment.

A photocrosslinkable trehalose derivative carrying mesogenic groups was synthesized by esterification reactions. The derivative (TC-HBPHA) was synthesized by the reaction of partially cinnamoyl-modified trehalose (TC4) with 4-(4-hexyloxybenzoyloxy)phenoxy-6-oxohexanoic acid (HBPHA) as a mesogenic unit. TC-HBPHA showed a nematic liquid crystalline mesophase at a temperature range from 150 °C to 175 °C in the heating process under observation with a polarized optical microscope.

Preparation of photocrosslinked fish elastin polypeptide/microfibrillated cellulose composite gels with elastic properties for biomaterial applications.

Photocrosslinked hydrogels reinforced by microfibrillated cellulose (MFC) were prepared from a methacrylate-functionalized fish elastin polypeptide and MFC dispersed in dimethylsulfoxide (DMSO). First, a water-soluble elastin peptide with a molecular weight of ca. 500 g/mol from the fish bulbus arteriosus was polymerized by N,N'-dicyclohexylcarbodiimide (DCC), a condensation reagent, and then modified with 2-isocyanatoethyl methacrylate (MOI) to yield a photocrosslinkable fish elastin polypeptide.

A healing period increases mini-implant stability in growing rats.

We assessed the stability of orthodontic mini-implants in young rats. Male rats with mean ages of 6 weeks (n = 16) and 20 weeks (n = 16) were divided into four groups (n = 8 each). In the 6- and 20-week immediate-loading groups, immediately after placement, mini-implants were exposed to an experimental traction force for 2 weeks.

Preparation and magnetic properties of multiferroic CuMnO2 nanoparticles.

CuMnO2 nanoparticles with diameters of 64 nm were synthesized by a novel wet chemical method. An optimized two-step annealing method was developed through the analysis of thermogravimetric differential thermal analysis (TG-DTA) measurements in order to obtain single-phase CuMnO2. A sharp exothermic peak was observed in the DTA curve at approximately 500 K where structural changes of the copper oxides and manganese oxides in the precursor are expected to occur.

Characterization of magnetic and dielectric properties of Bi(1-x)Gd(x)FeO3 nanoparticles by local structure analyses.

Bi(1-x)Gd(x)FeO3 (0 < or = x < or = 1.0) nanoparticles were synthesized by a wet chemical method. The annealing temperatures were controlled to obtain single-phase Bi(1-x)Gd(x)FeO3 nanoparticles.

Involvement of P2Y13 receptor in suppression of neuronal differentiation.

We examined the receptor-mediated effects of extracellular ATP on neuronal differentiation of PC12 cells, Neuro2a cells and MEB5 cells by using a series of receptor antagonists. The P2Y13 receptor antagonist MRS2211 significantly accelerated neurite outgrowth in all cases. Treatment with nerve growth factor (NGF) alone activated ERK1/2 in PC12 cells, and the activation was further increased by MRS2211.

Orthodontic mini-implant stability and the ratio of pilot hole implant diameter.

One notable complication of mini-implants that are used to provide anchorage in orthodontic treatment is loosening. The aim of this study was to evaluate the relationship between mini-implant mobility during the healing phase and the prognosis for implant stability. Twenty male Wistar rats (aged 20 weeks) were used.

Synthesis of 6-F-ergosterol and its influence on membrane-permeabilization of amphotericin B and amphidinol 3.

Two well-known antifungals, amphotericin B (AmB) and amphodinol 3 (AM3), are thought to exert antifungal activity by forming ion-permeable channels or pores together with sterol molecules. However, detailed molecular recognitions for AmB-sterol and AM3-sterol in lipid bilayers have yet to be determined. Toward (19)F NMR-based investigation of the molecular recognition underlying their potent antifungal activity, we synthesized 6-fluoro-ergosterol in five steps via ring opening of (5α,6α)-epoxide of ergosterol acetate with using novel combination of TiF(4) and n-Bu(4)N(+)Ph(3)SiF(2)(-).

Tapered orthodontic miniscrews induce bone-screw cohesion following immediate loading.

The aim of this study was to investigate the initial stability of tapered orthodontic miniscrews (T-type screws) after placement, the necessity of a healing period, and the propriety of immediate loading. Twenty male Wistar rats with a mean age of 20 weeks were divided into two groups. In the immediate-loading groups, straight orthodontic miniscrews (S-type screws) and T-type screws (five rats each) underwent experimental traction force for 2 weeks (W) immediately after placement.

Biomechanical effect of abutment on stability of orthodontic mini-implant. A finite element analysis.

The biomechanical influences of primary factors on titanium mini-implant, which is used as an anchorage for orthodontic tooth movement, were quantified using the three-dimensional finite element method. Six types of finite element models were designed to show various thread pitches from 0.5 to 1.

Permissible limit for mandibular expansion.

In recent years, mandibular expansion has been increasingly performed in conjunction with orthodontic treatment. Lateral tipping of the molars associated with mandibular expansion should, however, be considered, because excessive expansion may result in excessive buccal tooth inclination, which may disturb the occlusal relationship. This study was conducted to quantitatively clarify molar movement during mandibular expansion using the Schwarz appliance to determine the permissible limit of mandibular expansion as a clinical index for inclination movement.

Comparative studies of a humanized anti-glycoprotein IIb/IIIa monoclonal antibody, YM337, and abciximab on in vitro antiplatelet effect and binding properties.

The effects of YM337, the Fab fragment of a humanized anti-glycoprotein IIb/IIIa (GPIIb/IIIa) monoclonal antibody C4G1, on in vitro platelet function and binding properties were compared with those of abciximab, the Fab fragment of the human/murine chimeric anti-GPIIb/IIIa monoclonal antibody 7E3. Both agents completely inhibited platelet aggregation caused by all agonists tested except ristocetin. Further, both inhibited human platelet adhesion to von Willebrand factor, fibrinogen, fibronectin and subendothelial matrix with similar potency.