Naked-eye detection of specific DNA sequences amplified by the polymerase chain reaction with nanocomposite beads.

We developed a novel nanocomposite bead system for detection by the naked eye of specific DNA sequences amplified by the polymerase chain reaction (PCR). The DNA probes, which were complementary to the target DNA, are conjugated with the nanocomposite beads. If the amplified products contained sequences complementary to the probes, the beads aggregated through sandwich hybridization.

Possible steps of complete disassembly of post-termination complex by yeast eEF3 deduced from inhibition by translocation inhibitors.

Ribosomes, after one round of translation, must be recycled so that the next round of translation can occur. Complete disassembly of post-termination ribosomal complex (PoTC) in yeast for the recycling consists of three reactions: release of tRNA, release of mRNA and splitting of ribosomes, catalyzed by eukaryotic elongation factor 3 (eEF3) and ATP. Here, we show that translocation inhibitors cycloheximide and lactimidomycin inhibited all three reactions.

Ribosome recycling step in yeast cytoplasmic protein synthesis is catalyzed by eEF3 and ATP.

After each round of protein biosynthesis, the posttermination complex (PoTC) consisting of a ribosome, mRNA, and tRNA must be disassembled into its components for a new round of translation. Here, we show that a Saccharomyces cerevisiae model PoTC was disassembled by ATP and eukaryotic elongation factor 3 (eEF3). GTP or ITP functioned with less efficiency and adenosine 5gamma'-(beta,gamma-imido)triphosphate did not function at all.

Quantitative detection of chloroethene-reductive bacteria Dehalococcoides spp. using alternately binding probe competitive Polymerase Chain Reaction.

Dehalococcoides spp. are responsible for the reductive dehalogenation of environmental contaminants and are candidates for engineered bioremediation. The development of a sensitive, reliable, and rapid method for the quantification of Dehalococcoides spp.

Universal quenching probe system: flexible, specific, and cost-effective real-time polymerase chain reaction method.

We have developed a flexible, specific, and cost-effective real-time polymerase chain reaction (PCR) method. In this technique, a quenching probe (QProbe) and a nonfluorescent 3'-tailed probe are used. The QProbe is a singly labeled oligonucleotide bearing a fluorescent dye that is quenched via electron transfer between the dye and a guanine base at a particular position.

Real-time reverse transcription loop-mediated isothermal amplification for rapid and simple quantification of WT1 mRNA.

Objectives: This study developed a novel MRD monitoring method targeting Wilms' tumor gene (WT1) mRNA using reverse transcription loop-mediated isothermal amplification (RT-LAMP).

Design And Methods: A primer set for the assay was designed on the basis of the sequences between the 17AA and KTS regions of WT1mRNA. WT1 mRNA was quantified by real-time RT-LAMP and the accuracy of RT-LAMP was compared with that of real-time RT-PCR.

Chemical synthesis and properties of 5-taurinomethyluridine and 5-taurinomethyl-2-thiouridine.

Unique taurine-containing uridine derivatives, 5-taurinomethyluridine (tau m5U) and 5-taurinomethyl-2-thiouridine (tau m5s2U), which were discovered in mammalian mitochondrial tRNAs, exist at the first position of the anticodon. In this paper, we report the first efficient synthesis of tau m5U and tau m5s2U and describe their physicochemical properties. These modified ribonucleosides were synthesized by the reaction of 5-substituted uridine derivatives with a tetrabutylammonium salt of taurine that is highly reactive and well-soluble in common organic solvents.

Modified uridines with C5-methylene substituents at the first position of the tRNA anticodon stabilize U.G wobble pairing during decoding.

Post-transcriptional modifications at the first (wobble) position of the tRNA anticodon participate in precise decoding of the genetic code. To decode codons that end in a purine (R) (i.e.

Estimation of single-nucleotide polymorphism allele frequency by alternately binding probe competitive polymerase chain reaction.

Estimation of single-nucleotide polymorphism (SNP) allele frequency in pooled DNA samples is a promising approach to clarify the relationships between SNPs and diseases. Here, we present a simple, accurate, and cost-effective method for estimating SNP allele frequency, called alternately binding probe (ABProbe) competitive polymerase chain reaction (ABC-PCR) that entails no expensive devices for real-time fluorescence measurement and complex post-PCR steps. We prepared DNA pools of PCR products derived from homozygous samples of three different SNPs (ALDH2, GNB3, and HTR2A) in different portions, and the allele frequencies of these samples were estimated by ABC-PCR.

Retrieval of entire genes from environmental DNA by inverse PCR with pre-amplification of target genes using primers containing locked nucleic acids.

We had been unsuccessful to amplify desired nucleotide sequences from various environmental DNA samples by using the inverse polymerase chain reaction (IPCR) technique, most probably because the copy numbers of target DNA sequences had been quite low. To enrich the target DNA sequences prior to IPCR, a rolling-circle amplification was used with a site-specific primer containing locked nucleic acids (LNAs). This pre-amplified IPCR (PAI-PCR) method increased the sensitivity of PCR almost 10,000 times compared with the standard IPCR in model experiments using Escherichia coli.

Calibration-curve-free quantitative PCR: a quantitative method for specific nucleic acid sequences without using calibration curves.

We have developed a simple quantitative method for specific nucleic acid sequences without using calibration curves. This method is based on the combined use of competitive polymerase chain reaction (PCR) and fluorescence quenching. We amplified a gene of interest (target) from DNA samples and an internal standard (competitor) with a sequence-specific fluorescent probe using PCR and measured the fluorescence intensities before and after PCR.

Technique for quantitative detection of specific DNA sequences using alternately binding quenching probe competitive assay combined with loop-mediated isothermal amplification.

We describe a novel technique for a simple, rapid, and reliable quantitative detection of specific DNA sequences using an alternately binding quenching probe (AB-QProbe) that binds to either the gene of interest (target) or an internal standard (competitor) in combination with loop-mediated isothermal amplification (LAMP). The AB-QProbe is a singly labeled oligonucleotide bearing a fluorescent dye at the 5' end. The fluorescence intensity of the AB-QProbe reflects the ratio of the LAMP products from the target and competitor.

Quantitative method for specific nucleic acid sequences using competitive polymerase chain reaction with an alternately binding probe.

We have developed a simple, cost-effective, and accurate method for the quantification of specific nucleic acid sequences by the combined use of competitive PCR and a sequence-specific fluorescent probe that binds to either the gene of interest (target) or internal standard (competitor), referred to as alternately binding probe (ABProbe). In this method, the target and competitor were coamplified with the ABProbe, and then the fluorescence intensity was measured. The ratio of the target to the competitor can be calculated from the fluorescence intensity of the ABProbe using fluorescence quenching and fluorescence resonance energy transfer, that is, the starting quantity of the target is successfully calculated by end-point fluorescence measurement.

Characterization and quantification of ammonia-oxidizing bacteria in eutrophic coastal marine sediments using polyphasic molecular approaches and immunofluorescence staining.

Tokyo Bay, a eutrophic bay in Japan, receives nutrients from wastewater plants and other urban diffuse sources via river input. A transect was conducted along a line from the Arakawa River into Tokyo Bay to investigate the ecological relationship between the river outflow and the distribution, abundance and population structure of ammonia-oxidizing bacteria (AOB). Five surficial marine sediments were collected and analysed with polyphasic approaches.

Quantification of genetically modified soybean by quenching probe polymerase chain reaction.

Quenching probe (QProbe) polymerase chain reaction (PCR) is a simple and cost-effective real-time PCR assay in comparison with other real-time PCR assays such as the TaqMan assay. We used QProbe-PCR to quantify genetically modified (GM) soybean (Roundup Ready soybean). We designed event-specific QProbes for Le1 (soy endogenous gene) and RRS (recombinant gene), and we quantified certified reference materials containing 0.

Reevaluation and reduction of a PCR bias caused by reannealing of templates.

We reevaluated the bias toward a 1:1 ratio of products in multitemplate PCR used in ecological studies and showed that the template reannealing at the annealing step would not cause the bias; however, the preferential homoduplex formation during temperature decrease from denaturation to annealing step would cause the bias.

A FRET-based analysis of SNPs without fluorescent probes.

Fluorescence resonance energy transfer (FRET) is a simple procedure for detecting specific DNA sequences, and is therefore used in many fields. However, the cost is relatively high, because FRET-based methods usually require fluorescent probes. We have designed a cost-effective way of using FRET, and developed a novel approach for the genotyping of single nucleotide polymorphisms (SNPs) and allele frequency estimation.

A new approach to SNP genotyping with fluorescently labeled mononucleotides.

Fluorescence resonance energy transfer (FRET) is one of the most powerful and promising tools for single nucleotide polymorphism (SNP) genotyping. However, the present methods using FRET require expensive reagents such as fluorescently labeled oligonucleotides. Here, we describe a novel and cost-effective method for SNP genotyping using FRET.

Quick two-step RNA ligation employing periodate oxidation.

The introduction of modified or labeled nucleotides into RNA is a powerful RNA engineering tool as it enables us to investigate how native RNA modifications affect RNA function and structure. It also helps in the structural analysis of RNA. A modified nucleotide can be introduced into a specific position of RNA by the method of two-step enzymatic ligation of RNA fragments.

Decoding property of C5 uridine modification at the wobble position of tRNA anticodon.

Post-transcriptional modification at the first (wobble) position of the tRNA anticodon participates in precise decoding of the genetic code. We recently identified a novel taurine-containing modified uridine (tau m5U; 5-taurinomethyluridine) at the wobble position of mammalian mitochondrial tRNAs and found lack of this modification in mutant mitochondrial tRNAs from human pathogenic cells of the mitochondrial encephalomyopathies, investigate molecular pathogenesis of the diseases, decoding activity of wobble uridines with or without C5 modification was measured using E. coli cell-free translation system.

Chemical synthesis of novel taurine-containing uridine derivatives.

Recently, novel taurine-containing uridine derivatives were discovered in mammalian mitochondrial tRNAs, and these modified ribonucleosides existed at the first position of the anti-codon. This paper describes the chemical synthesis of these novel uridine derivatives, 5-taurinomethyluridine (tau m5U) and 5-taurinomethyl-2-thiouridine (tau m5s2U). These taurine-containing uridine derivatives were synthesized in the good yields by the reaction of the corresponding 5-hydroxymethyluridine derivatives with taurine under basic conditions.

Extracellular acidic polysaccharide production by a two-membered bacterial coculture.

A two-membered coculture of strains KYM-7 and KYM-8, identified as Cellulomonas cellulans and Agrobacterium tumefaciens, respectively, produced a large amount of an extracellular polysaccharide, designated APK-78, from starch. Each strain in pure culture produced only very little amount of polysaccharide from starch; the coexistence of the two strains from the early stage of cultivation was indispensable for a large amount of polysaccharide to be produced. The polysaccharide APK-78 was acidic and composed of glucose, galactose, succinic acid, and pyruvic acid with a molar ratio of 8.