Single-Step Production of Doubly Re-entrant Microstructures Through Reaction-Diffusion Photolithography for Omniphobic Surfaces.

Omniphobic surfaces, which repel virtually any liquid regardless of its wettability, have been developed using doubly re-entrant microstructures. Although various microfabrication techniques have been explored, these often require multiple complex steps. In this study, reaction-diffusion photolithography (RDP) is used to fabricate micropost arrays with doubly re-entrant geometries through a single-step ultraviolet (UV) exposure process.

NIR-Reflective Black Photonic Films Designed for Effective LiDAR Recognition.

Conventional dark-tone paints absorb both visible light and near-infrared (NIR) wavelengths, posing a challenge for light detection and ranging (LiDAR) recognition in autonomous driving. To overcome this issue, various chemical and structural coating materials have been explored to selectively reflect NIR. In this study, we newly propose colloidal photonic crystals with a stopband in the NIR range, fabricated through the spontaneous formation of crystalline arrays of silica particles dispersed in a photocurable resin, as a potential solution.

Full-Spectrum Mechanochromic Photonic Films with Large Interparticle Distance.

Non-close-packed crystalline arrays of colloidal particles in an elastic matrix exhibit mechanochromism. However, small interparticle distances often limit the range of reversible color shifts and reduce reflectivity during a blueshift. A straightforward, reproducible strategy using matrix swelling to increase interparticle distance and improve mechanochromic performance is presented.

Retroreflective Multichrome Microdome Arrays Created by Single-Step Reflow.

Structural colors are known for their tunability, fade resistance, and eco-friendliness. Recent advancements have shown that such colors can be efficiently produced using total internal reflection (TIR) on high-refractive-index convex microstructures without the need for periodic nanostructures. However, a reproducible, fast, and programmable production strategy for these microstructures is essential for commercial applications.

Direct Ink Writing of Rigid Microparticles.

Direct ink writing (DIW) enables 3D printing of macroscopic objects with well-defined structures and compositions that controllably change over length scales of order 100 µm. Unfortunately, only a limited number of materials can be processed through DIW because it imparts stringent rheological requirements on inks. This limitation can be overcome for soft materials, if they are formulated as microparticles that, if jammed, fulfill the rheological requirements to be printed.

Concentric Capillary Microfluidic Devices Designed for Robust Production of Multiple-Emulsion Droplets.

Multiple emulsions are used as templates for producing functional microcapsules due to their unique core-shell geometry. Employing glass capillary devices with coaxial channels has proven effective in creating uniform multiple-emulsion droplets. However, the use of partially miscible fluids, crucial for microcapsule production, often results in clogging and disrupts the stability of these devices.

Centrifugation-Mediated Crystal Growth of Attractive Colloids for Band Edge Lasing.

Attractive depletion interactions are utilized to organize colloidal particles into crystalline arrays with high crystallinity through spontaneous phase separation. However, uncontrolled nucleation frequently leads to the formation of crystalline grains with varied crystal orientations, which hampers the optical performance of photonic crystals. Here, colloidal crystals have been engineered with uniform orientation and high surface coverage by applying centrifugal force during the depletion-induced assembly of polystyrene particles.

Icosahedral supracrystal assembly from polymer-grafted nanoparticles via interplay of interfacial energy and confinement effect.

Self-assembly of nanoparticles (NPs) in drying emulsion droplets paves the way for intricate three-dimensional (3D) superstructures, given the myriad of control parameters for fine-tuning assembly conditions. With their substantial energetic dynamics that are acutely responsive to emulsion confinements, polymeric ligands incorporated into a system can enrich its structural diversity. Here, we demonstrate the assembly of soft polymer-grafted NPs into Mackay icosahedrons beyond spherical body-centered cubic (BCC) packing structures commonly observed for these soft spheres.

Microballoons: Osmotically-inflated elastomer shells for ultrafast release of encapsulants and mechanical energy.

Hypothesis: Microcapsules with osmotically-inflated elastic shells exhibit an ultrafast release of encapsulants while mechanically stimulating the microenvironments, akin to popping balloons.

Experiments: To prepare elastic shells with uniform thickness and size, monodisperse water-in-oil-in-water (W/O/W) double-emulsion drops are produced in a capillary microfluidic device. The polydimethylsiloxane (PDMS)-containing oil phase is thermally cured to create the elastic shell.

Structural Color Inks Containing Photonic Microbeads for Direct Writing.

Printing structurally colored patterns is of great importance for providing customized graphics for various purposes. Although a direct writing technique has been developed, the use of colloidal dispersions as photonic inks requires delicate printing conditions and restricts the mechanical and optical properties of printed patterns. In this work, we produce elastic photonic microbeads through scalable bulk emulsification and formulate photonic inks containing microbeads for direct writing.

Deterministic Formation and Growth of Dendritic Crystals of Attractive Colloids.

Dendrites are ubiquitous crystals produced in supersaturated solutions and supercooled melts, but considerably less is known about their formation and growth kinetics. Here, the key factors are explored that dictate dendrite formation and growth, utilizing experimental colloidal models in which the particles act as molecules with Mie potential. Depletion attraction is employed to colloids and manipulate their strength to control supersaturation.

Hyperreflective photonic crystals created by shearing colloidal dispersions at ultrahigh volume fraction.

Colloidal crystallization serves as one of the most economic and scalable production methods for photonic crystals. However, insufficient optical performance, nonuniformity and low reproducibility remain challenges for advanced high-value applications. In this study, we optimally formulate a photocurable dispersion of silica particles and apply shear flow to unify the orientation of the colloidal crystals, ensuring high optical performance and uniformity.

Colorimetric Detection of Furfural with Enhanced Visible Absorption of Furfural-DNPH in Basic Conditions.

Furfural is an intermediary toxic aldehyde compound produced during heat-induced food processing and storage. Furfural is also formed by the degradation of cellulosic insulation in oil-immersed electric potential transformers, whose level is an important indicator of aging for replacement. In this study, we report a new means to detect the trace level of furfural in a colorimetric manner.

Designing Tough Hydrogel Shells for Glucose Sensing.

Conventional hydrogel microcapsules often suffer from inadequate mechanical stability, hindering their use. Here, water-cored double-network (DN) hydrogel shells are designed, formed by polyacrylamide and calcium alginate networks using triple-emulsion templates. These DN hydrogel shells offer robust mechanical stability, optical transparency, and a precisely-defined cut-off threshold.

Hydrogel-Encased Photonic Microspheres with Enhanced Color Saturation and High Suspension Stability.

Regular arrays of colloidal particles can produce striking structural colors without the need for any chemical pigments. Regular arrays of colloidal particles can be processed into microparticles via emulsion templates for use as structural colorants. Photonic microparticles, however, suffer from intense incoherent scattering and lack of suspension stability.

Micromolding-Assisted Production of SERS-Active Microcylinders for Size- and Charge-Selective Molecular Detection.

Surface-enhanced Raman scattering (SERS) is an effective technique for amplifying the Raman signal of molecules by using metal nanostructures. However, these metal surfaces are susceptible to contamination by undesirable adhesives in complex mixtures, typically necessitating a time-consuming and costly sample pretreatment. In order to circumvent this, metal nanoparticles have been uniformly embedded within microgels by using microfluidics.

Regioselective Growth of Colloidal Crystals Induced by Depletion Attraction.

Colloidal crystals display photonic stopbands that generate reflective structural colors. While micropatterning offers significant value for various applications, the resolution is somewhat limited for conventional top-down approaches. In this work, a simple, single-step bottom-up approach is introduced to produce photonic micropatterns through depletion-mediated regioselective growth of colloidal crystals.

Auxetic Photonic Patterns with Ultrasensitive Mechanochromism.

Photonic crystals with mechanochromic properties are currently under intensive study to provide intuitive colorimetric detection of strains for various applications. However, the sensitivity of color change to strain is intrinsically limited, as the degree of deformation determines the wavelength shift. To overcome this limitation, auxetic photonic patterns that exhibit ultra-sensitive mechanochromism are designed.

Advanced Additive Manufacturing of Structurally-Colored Architectures.

Direct ink writing (DIW) stands out as a facile additive manufacturing method, minimizing material waste. Nonetheless, developing homogeneous Bingham inks with high yield stress and swift liquid-to-solid transitions for versatile 3D printing remains a challenge. In this study, high-performance Bingham inks are formulated by destabilizing silica particle suspensions in acrylate-based resin.

Enhanced performance of lead sulfide quantum dot-sensitized solar cells by controlling the thickness of metal halide perovskite shells.

The metal halide perovskite CHNHPbI (MAP) can be applied as the shell layer of lead sulfide quantum dots (PbS QDs) for improving solar power conversion efficiency. However, basic physics for this PbS core/MAP shell QD system is still unclear and needs to be clarified to further improve efficiency. Therefore, in this study, we investigate how MAP shell thickness affects device performance and dynamics of charge carriers for PbS QD-sensitized solar cells.

Asymmetric Pairing of Cholesteric Liquid Crystal Droplets for Programmable Photonic Cross-Communication.

The photonic cross-communication between photonic droplets has provided complex color patterns through multiple reflections, potentially serving as novel optical codes. However, the cross-communication is mostly restricted to symmetric pairs of identical droplets. Here, a design rule is reported for the asymmetric pairing of two distinct droplets to provide bright color patterns through strong cross-communication and enrich a variety of optical codes.

Effect of surface tension on elastocapillary wrinkling of interfacially adsorbed hydrogel disks with photothermally programmed swelling profiles.

In this work, we study the influence of surface tension on light-induced wrinkling of hydrogel disks containing patterned regions of photothermally-active gold nanoparticles at the air-water interface. The disks, which are initially radially stretched by the air-water surface tension, undergo wrinkling under illumination through a radially nonuniform photothermal deswelling. By tuning the surface tension of the surrounding air-water interface through variations in concentration of a poly(vinyl alcohol) surfactant, we observe a critical threshold for wrinkling, followed by a monotonic decrease in wrinkle number with decreasing surface tension.

Nanostructure-free crescent-shaped microparticles as full-color reflective pigments.

Structural colors provide a promising visualization with high color saturation, iridescent characteristics, and fade resistance. However, pragmatic uses are frequently impeded by complex manufacturing processes for sophisticated nanostructures. Here, we report a facile emulsion-templating strategy to produce crescent-shaped microparticles as structural color pigments.