Chiral 3D structures through multi-dimensional transfer printing of multilayer quantum dot patterns.

Three-dimensional optical nanostructures have garnered significant interest in photonics due to their extraordinary capabilities to manipulate the amplitude, phase, and polarization states of light. However, achieving complex three-dimensional optical nanostructures with bottom-up fabrication has remained challenging, despite its nanoscale precision and cost-effectiveness, mainly due to inherent limitations in structural controllability. Here, we report the optical characteristics of intricate two- and three-dimensional nanoarchitectures made of colloidal quantum dots fabricated with multi-dimensional transfer printing.

Electrostatic steering of thermal emission with active metasurface control of delocalized modes.

We theoretically describe and experimentally demonstrate a graphene-integrated metasurface structure that enables electrically-tunable directional control of thermal emission. This device consists of a dielectric spacer that acts as a Fabry-Perot resonator supporting long-range delocalized modes bounded on one side by an electrostatically tunable metal-graphene metasurface. By varying the Fermi level of the graphene, the accumulated phase of the Fabry-Perot mode is shifted, which changes the direction of absorption and emission at a fixed frequency.

Design parameters of free-form color splitters for subwavelength pixelated image sensors.

Metasurface-based color splitters are emerging as next-generation optical components for image sensors, replacing classical color filters and microlens arrays. In this work, we report how the design parameters such as the device dimensions and refractive indices of the dielectrics affect the optical efficiency of the color splitters. Also, we report how the design grid resolution parameters affect the optical efficiency and discover that the fabrication of a color splitter is possible even in legacy fabrication facilities with low structure resolutions.

Wearable Surface-Lighting Micro-Light-Emitting Diode Patch for Melanogenesis Inhibition.

Wearable light-emitting diode (LED)-based phototherapeutic devices have recently attracted attention as skin care tools for wrinkles, acne, and hyperpigmentation. However, the therapeutic effectiveness and safety of LED stimulators are still controversial due to their inefficient light transfer, high heat generation, and non-uniform spot irradiation. Here, a wearable surface-lighting micro-LED (SµLED) photostimulator is reported for skin care and cosmetic applications.

Promoting electrocatalytic overall water splitting by sulfur incorporation into CoFe-(oxy)hydroxide.

The design and fabrication of highly cost-effective electrocatalysts with high activity, and stability to enhance the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been considered to be one of the most promising approaches toward overall water splitting. In this study, sulfur-incorporated cobalt-iron (oxy)hydroxide (S-(Co,Fe)OOH) nanosheets were directly grown on commercial iron foam galvanic corrosion and hydrothermal methods. The incorporation of sulfur into (Co,Fe)OOH results in superior catalytic performance and high stability in both the HER and OER conducted in 1 M KOH.

Full 2π tunable phase modulation using avoided crossing of resonances.

Active metasurfaces have been proposed as one attractive means of achieving high-resolution spatiotemporal control of optical wavefronts, having applications such as LIDAR and dynamic holography. However, achieving full, dynamic phase control has been elusive in metasurfaces. In this paper, we unveil an electrically tunable metasurface design strategy that operates near the avoided crossing of two resonances, one a spectrally narrow, over-coupled resonance and the other with a high resonance frequency tunability.

Impacts of KF Post-Deposition Treatment on the Band Alignment of Epitaxial Cu(In,Ga)Se Heterojunctions.

In this study, we investigated band alignments at CdS/epitaxial CuInGaSe (epi-CIGSe) and epi-CIGSe/GaAs heterointerfaces for solar cell applications using ultraviolet, inverse, and X-ray photoemission spectroscopy (UPS, IPES, and XPS) techniques. We clarified the impacts of KF postdeposition treatment (KF-PDT) at the CdS/epi-CIGSe front heterointerfaces. We found that KF-PDT changed the conduction band alignment at the CdS/epi-CIGSe heterointerface from a cliff to flat configuration, attributed to an increase in the electron affinity () and ionization potential () of the epi-CIGSe surface because of a decrease in Cu and Ga contents.

Cobalt-Iron-Phosphate Hydrogen Evolution Reaction Electrocatalyst for Solar-Driven Alkaline Seawater Electrolyzer.

Seawater splitting represents an inexpensive and attractive route for producing hydrogen, which does not require a desalination process. Highly active and durable electrocatalysts are required to sustain seawater splitting. Herein we report the phosphidation-based synthesis of a cobalt-iron-phosphate ((Co,Fe)PO) electrocatalyst for hydrogen evolution reaction (HER) toward alkaline seawater splitting.

Microcellular sensing media with ternary transparency states for fast and intuitive identification of unknown liquids.

Rapid, accurate, and intuitive detection of unknown liquids is greatly important for various fields such as food and drink safety, management of chemical hazards, manufacturing process monitoring, and so on. Here, we demonstrate a highly responsive and selective transparency-switching medium for on-site, visual identification of various liquids. The light scattering–based sensing medium, which is designed to be composed of polymeric interphase voids and hollow nanoparticles, provides an extremely large transmittance window (>95%) with outstanding selectivity and versatility.

Ultracompact electro-optic waveguide modulator based on a graphene-covered λ/1000 plasmonic nanogap.

The extreme field confinement and electro-optic tunability of plasmons in graphene make it an ideal platform for compact waveguide modulators, with device footprints aggressively scaling orders of magnitude below the diffraction limit. The miniaturization of modulators based on graphene plasmon resonances is however inherently constrained by the plasmon wavelength, while their performance is bounded by material loss in graphene. In this report, we propose to overcome these limitations using a graphene-covered λ/1000 plasmonic nanogap waveguide that concentrates light on length scales more than an order of magnitude smaller than the graphene plasmon wavelength.

Plasma-Enhanced Atomic Layer Deposition of TiN Thin Films as an Effective Se Diffusion Barrier for CIGS Solar Cells.

Plasma-enhanced atomic layer deposition (PEALD) of TiN thin films were investigated as an effective Se diffusion barrier layer for Cu (In, Ga) Se (CIGS) solar cells. Before the deposition of TiN thin film on CIGS solar cells, a saturated growth rate of 0.67 Å/cycle was confirmed using tetrakis(dimethylamido)titanium (TDMAT) and N plasma at 200 °C.

Simulation and Fabrication of Nanoscale Spirals Based on Dual-Scale Self-Assemblies.

Archimedean spirals in nanometer scale have shown remarkable plasmonic responses derived from their linear and rotational asymmetry. Despite the unique optical properties of nanoscale spirals, their applications have been limited due to the difficulty in fabricating large-scale arrays with uniform and systematic control of the morphology. Here, we report simulation results of spiral morphologies, which are used to design a scalable fabrication process for nanoscale spirals and predict their plasmonic responses.

Unique and overlapping effects of triiodothyronine (T3) and thyroxine (T4) on sensory innervation of the chick cornea.

Multiple aspects of cornea development, including the innervation of the cornea by trigeminal axons, are sensitive to embryonic levels of thyroid hormone (TH). Although previous work showed that increased TH levels could enhance the rate of axonal extension within the cornea in a thyroxine (T4)-dependent manner, details underlying the stimulatory effect of TH on cornea innervation are unclear. Here, by examining the effects throughout all stages of cornea innervation of the two main THs, triiodothyronine (T3) and T4, we provide a more complete characterization of the stimulatory effects of TH on corneal nerves and begin to unravel the underlying molecular mechanisms.

Complete Complex Amplitude Modulation with Electronically Tunable Graphene Plasmonic Metamolecules.

Dynamic high-resolution wavefront modulation of light is a long-standing quest in photonics. Metasurfaces have shown potential for realizing light manipulation with subwavelength resolution through nanoscale optical elements, or metaatoms, to overcome the limitations of conventional spatial light modulators. State-of-the-art active metasurfaces operate phase modulation of the metaatoms, and their inability to also independently control the scattered amplitude leads to an inferior reconstruction of the desired wavefronts.

Order-of-Magnitude, Broadband-Enhanced Light Emission from Quantum Dots Assembled in Multiscale Phase-Separated Block Copolymers.

Achieving high emission efficiency in solid-state quantum dots (QDs) is an essential requirement for high-performance QD optoelectronics. However, most QD films suffer from insufficient excitation and light extraction efficiencies, along with nonradiative energy transfer between closely adjacent QDs. Herein, we suggest a highly effective strategy to enhance the photoluminescence (PL) of QD composite films through an assembly of QDs and poly(styrene--4-vinylpyridine)) (PS--P4VP) block copolymer (BCP).

All-Solid-State Lithium Battery Working without an Additional Separator in a Polymeric Electrolyte.

Considering the safety issues of Li ion batteries, an all-solid-state polymer electrolyte has been one of the promising solutions. Achieving a Li ion conductivity of a solid-state electrolyte comparable to that of a liquid electrolyte (>1 mS/cm) is particularly challenging. Even with characteristic ion conductivity, employment of a polyethylene oxide (PEO) solid electrolyte has not been sufficient due to high crystallinity.

Improving the Open Circuit Voltage through Surface Oxygen Plasma Treatment and 11.7% Efficient CuZnSnSe Solar Cell.

The photovoltaic performance of CuZnSnSe (CZTSe) solar cells subjected to surface oxygen plasma treatments is investigated. The observed improvements are related to an enhancement of the open circuit voltage V, that is, the suppression of the V deficit. The V monotonically increases with treatment time up to 0.

Observation of Wavelength-Dependent Quantum Plasmon Tunneling with Varying the Thickness of Graphene Spacer.

Plasmonic coupling provides a highly localized electromagnetic field in the gap of noble metals when illuminated by a light. The plasmonic field enhancement is generally known to be inversely proportional to the gap distance. Given such a relation, reducing the gap distance appears to be necessary to achieve the highest possible field enhancement.

Band Alignment of the CdS/CuZn(SnGe )Se Heterointerface and Electronic Properties at the CuZn(SnGe )Se Surface: x = 0, 0.2, and 0.4.

The surface electronic properties of the light absorber and band alignment at the p/n heterointerface are key issues for high-performance heterojunction solar cells. We investigated the band alignment of the heterointerface between cadmium sulfide (CdS) and Ge-incorporated CuZnSnSe (CZTGSe), with Ge/(Ge + Sn) ratios ( x) between 0 and 0.4, by X-ray photoelectron, ultraviolet, and inversed photoemission spectroscopies (XPS, UPS, and IPES, respectively).

Synthesis and Consolidation of Nanostructured Nb₂C-Al₂O₃ Composite.

Although an extremely hard ceramic material, niobium carbide has low fracture toughness to use wide applications. To fabricate nanostructured composite is common method to improve fracture toughness. Nanopowder mixture of Nb₂C and Al₂O₃ were synthesized according to the reaction (Al₄C₃+6Nb+3O₂ → 3Nb₂C+2Al₂O₃) from Al₄C₃ and Nb powders by high-energy ball milling.

Flash-Induced Self-Limited Plasmonic Welding of Silver Nanowire Network for Transparent Flexible Energy Harvester.

The outstanding performance (sheet resistance of 5 Ω sq at transmittance of 90%) and strongly adhesive (30.7 J m ) silver nanowires (AgNWs) are fabricated using flash-induced plasmonic welding (FPW) based on theoretical research of photothermal interactions. The FPW-processed AgNWs are utilized as electrodes of a transparent flexible energy harvester, and this device exhibits excellent transmittance and high electric output performance.

Crystallization behavior of silicon quantum dots in a silicon nitride matrix.

Silicon quantum dot superlattice was fabricated by alternating deposition of silicon rich nitride (SRN) and Si3N4 layers using RF magnetron co-sputtering. Samples were then annealed at temperatures between 800 and 1,100 degrees C and characterized by grazing incident X-ray diffraction (GIXRD), transmission electron microscopy (TEM), Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR). GIXRD and Raman analyses show that the formation of silicon quantum dots occurs with annealing above 1,100 degrees C for at least 60 minutes.

Investigation of bonding characteristics between Si quantum dots and a SiO2 matrix.

In order to understand and control the properties of Si quantum dot (QD) superlattice structures (SLS), it is necessary to investigate the bonding between the dots and their matrix and also the structures' crystallinities. In this study, a SiOx matrix system was investigated and analyzed for potential use as an all-silicon multi-junction solar cell. Si QD SLS were prepared by alternating deposition of Si rich SiOx (x = 0.

Clinical study of 7 cases of familial Mediterranean fever with MEFV gene mutation.

Objective: Familial Mediterranean fever (FMF) had been considered a rare disease in Japan, but since the identification of the causative gene (MEFV) for pyrin/marenostrin in 1997, the occurrence of FMF has been successively reported. We reviewed the clinical features of 7 patients diagnosed with FMF by gene analysis.

Methods: During April 2003 and March 2005, we investigated the clinical symptoms, treatment and MEFV types of 7 FMF patients who consulted the General Outpatient Clinic of Chiba University Hospital.

Treadmill exercise increases cell proliferation without altering of apoptosis in dentate gyrus of Sprague-Dawley rats.

The effects of forced treadmill exercise on cell proliferation and apoptosis in the hippocampal dentate gyrus in Sprague-Dawley rats were investigated. The animals were classified into three groups: the control group, the easy exercise group, and the moderate exercise group. In the control group, rats were left on the treadmill without running for 30 min per day, while rats in the exercise groups were made to run on the treadmill for the same duration.