High-resolution and analytical electron microscopy in a liquid flow cell via gas purging.

Liquid-phase transmission electron microscopy (LPTEM) technique has been used to perform a wide range of in situ and operando studies. While most studies are based on the sample contrast change in the liquid, acquiring high qualitative results in the native liquid environment still poses a challenge. Herein, we present a novel and facile method to perform high-resolution and analytical electron microscopy studies in a liquid flow cell.

Effect of Low Environmental Pressure on Sintering Behavior of NASICON-Type LiAlTi(PO) Solid Electrolytes: An ESEM Study.

Solid-state sintering at high temperatures is commonly used to densify solid electrolytes. Yet, optimizing phase purity, structure, and grain sizes of solid electrolytes is challenging due to the lack of understanding of relevant processes during sintering. Here, we use an environmental scanning electron microscopy (ESEM) to monitor the sintering behavior of NASICON-type LiAlTi(PO) (LATP) at low environmental pressures.

Nanoscale visualization of metallic electrodeposition in a well-controlled chemical environment.

Liquid phase transmission electron microscopy (TEM) provides a useful means to study a wide range of dynamics in solution with near-atomic spatial resolution and sub-microsecond temporal resolution. However, it is still a challenge to control the chemical environment (such as the flow of liquid, flow rate, and the liquid composition) in a liquid cell, and evaluate its effect on the various dynamic phenomena. In this work, we have systematically demonstrated the flow performance of anliquid TEM system, which is based on 'on-chip flow' driven by external pressure pumps.

Active Interphase Enables Stable Performance for an All-Phosphate-Based Composite Cathode in an All-Solid-State Battery.

High interfacial resistance and unstable interphase between cathode active materials (CAMs) and solid-state electrolytes (SSEs) in the composite cathode are two of the main challenges in current all-solid-state batteries (ASSBs). In this work, the all-phosphate-based LiFePO (LFP) and Li Al Ti (PO ) (LATP) composite cathode is obtained by a co-firing technique. Benefiting from the densified structure and the formed redox-active Li Fe Ti Al (PO ) (LFTAP) interphase, the mixed ion- and electron-conductive LFP/LATP composite cathode facilitates the stable operation of bulk-type ASSBs in different voltage ranges with almost no capacity degradation upon cycling.

transmission electron microscopy of battery cycling: thickness dependent breaking of TiO coating on Si/SiO nanoparticles.

Conformal coating of silicon (Si) anode particles is a common strategy for improving their mechanical integrity, to mitigate battery capacity fading due to particle volume expansion, which can result in particle crumbling due to lithiation induced strain and excessive solid-electrolyte interface formation. Here, we use transmission electron microscopy in an open cell to show that TiO coatings on Si/SiO particles undergo thickness dependent rupture on battery cycling where thicker coatings crumble more readily than thinner (∼5 nm) coatings, which corroborates the difference in their capacities.

Structural Study of Polyacrylonitrile-Based Carbon Nanofibers for Understanding Gas Adsorption.

Polyacrylonitrile-based carbon nanofibers (PAN-based CNFs) have great potential to be used for carbon dioxide (CO) capture due to their excellent CO adsorption properties. The porous structure of PAN-based CNFs originates from their turbostratic structure, which is composed of numerous disordered stacks of graphitic layers. During the carbonization process, the internal structure is arranged toward the ordered graphitic structure, which significantly influences the gas adsorption properties of PAN-based CNFs.

electrochemistry inside a TEM with controlled mass transport.

The field of electrochemistry promises solutions for the future energy crisis and environmental deterioration by developing optimized batteries, fuel-cells and catalysts. Combined with in situ transmission electron microscopy (TEM), it can reveal functional and structural changes. A drawback of this relatively young field is lack of reproducibility in controlling the liquid environment while retaining the imaging and analytical capabilities.

Three-Dimensional Quantification of the Facet Evolution of Pt Nanoparticles in a Variable Gaseous Environment.

Pt nanoparticles play an essential role in a wide variety of catalytic reactions. The activity of the particles strongly depends on their three-dimensional (3D) structure and exposed facets, as well as on the reactive environment. High-resolution electron microscopy has often been used to characterize nanoparticle catalysts but unfortunately most observations so far have been either performed in vacuum and/or using conventional (2D) in situ microscopy.

Facile Synthesis toward the Optimal Structure-Conductivity Characteristics of the Argyrodite LiPSCl Solid-State Electrolyte.

The high Li-ion conductivity of the argyrodite LiPSCl makes it a promising solid electrolyte candidate for all-solid-state Li-ion batteries. For future application, it is essential to identify facile synthesis procedures and to relate the synthesis conditions to the solid electrolyte material performance. Here, a simple optimized synthesis route is investigated that avoids intensive ball milling by direct annealing of the mixed precursors at 550 °C for 10 h, resulting in argyrodite LiPSCl with a high Li-ion conductivity of up to 4.

Towards optimization of experimental parameters for studying Li-O battery discharge products in TEM using in situ EELS.

The key to understanding the performance of Li-O batteries is to study the chemical and structural properties of their discharge product(s) at the nanometer scale. Using TEM for this purpose poses challenges due to the sensitivity of samples to air and electron beams. This paper describes our use of in situ EELS to evaluate experimental procedures to reduce electron-beam degradation and presents methods to deal with air sensitivity.

Magnetic Phase Transition in Spark-Produced Ternary LaFeSi Nanoalloys.

Using the magnetocaloric effect in nanoparticles holds great potential for efficient refrigeration and energy conversion. The most promising candidate materials for tailoring the Curie temperature to room temperature are rare-earth-based magnetic nanoalloys. However, only few high-nuclearity lanthanide/transition-metal nanoalloys have been produced so far.

Accessing the bottleneck in all-solid state batteries, lithium-ion transport over the solid-electrolyte-electrode interface.

Solid-state batteries potentially offer increased lithium-ion battery energy density and safety as required for large-scale production of electrical vehicles. One of the key challenges toward high-performance solid-state batteries is the large impedance posed by the electrode-electrolyte interface. However, direct assessment of the lithium-ion transport across realistic electrode-electrolyte interfaces is tedious.

Operando Nanobeam Diffraction to Follow the Decomposition of Individual Li2O2 Grains in a Nonaqueous Li-O2 Battery.

Intense interest in the Li-O2 battery system over the past 5 years has led to a much better understanding of the various chemical processes involved in the functioning of this battery system. However, detailed decomposition of the nanostructured Li2O2 product, held at least partially responsible for the limited reversibility and poor rate performance, is hard to measure operando under realistic electrochemical conditions. Here, we report operando nanobeam X-ray diffraction experiments that enable monitoring of the decomposition of individual Li2O2 grains in a working Li-O2 battery.