An off-chip platform for on-demand, single-target encapsulation for ultrasensitive biomarker detection.

Closed-channel microfluidic systems offer versatile on-chip capabilities for bioanalysis but often face complex fabrication and operational challenges. In contrast, free-boundary off-chip microfluidic platforms are relatively simple to fabricate and operate but lack the ability to perform complex tasks such as on-demand single-target sorting and encapsulation. To address these challenges, we develop an off-chip platform powered by a fluorescent-activated mechanical droplet sorting and production (FAM-DSP) system.

Wearable Electrochemical Biosensors for Advanced Healthcare Monitoring.

Recent advancements in wearable electrochemical biosensors have opened new avenues for on-body and continuous detection of biomarkers, enabling personalized, real-time, and preventive healthcare. While glucose monitoring has set a precedent for wearable biosensors, the field is rapidly expanding to include a wider range of analytes crucial for disease diagnosis, treatment, and management. In this review, recent key innovations are examined in the design and manufacturing underpinning these biosensing platforms including biorecognition elements, signal transduction methods, electrode and substrate materials, and fabrication techniques.

Humidity-Responsive Liquid Metal Core-Shell Materials for Enduring Heat Retention and Insulation.

High humidity in extremely cold weather can undermine the insulation capability of the clothing, imposing serious life risks. Current clothing insulation technologies have inherent deficiencies in terms of insulation efficiency and humidity adaptability. Here, humidity-stimulated self-heating clothing using aluminum core-liquid metal shell microparticles (Al@LM-MPs) as the filler is reported.

Enhanced CRISPR/Cas12a-based quantitative detection of nucleic acids using double emulsion droplets.

Pairing droplet microfluidics and CRISPR/Cas12a techniques creates a powerful solution for the detection and quantification of nucleic acids at the single-molecule level, due to its specificity, sensitivity, and simplicity. However, traditional water-in-oil (W/O) single emulsion (SE) droplets often present stability issues, affecting the accuracy and reproducibility of assay results. As an alternative, water-in-oil-in-water (W/O/W) double emulsion (DE) droplets offer superior stability and uniformity for droplet digital assays.

Enhancing the sensitivity and stability of electrochemical aptamer-based sensors by AuNPs@MXene nanocomposite for continuous monitoring of biomarkers.

Electrochemical aptamer-based (E-AB) sensors offer exciting potential for real-time tracking of various biomarkers, such as proteins and small molecules, due to their exceptional selectivity and adaptability. However, most E-AB sensors rely on planar gold structures, which inherently limit their sensitivity and operational stability for continuous monitoring of biomarkers. Although gold nanostructures have recently enhanced E-AB sensor performance, no studies have explored the combination of gold nanostructure with other types of nanomaterials for continuous molecular monitoring.

An automated and intelligent microfluidic platform for microalgae detection and monitoring.

Microalgae not only play a vital role in the ecosystem but also hold promising commercial applications. Conventional methods of detecting and monitoring microalgae rely on field sampling followed by transportation to the laboratory for manual analysis, which is both time-consuming and laborious. Although machine learning (ML) algorithms have been introduced for microalgae detection in the laboratory, no integrated platform approach has yet emerged to enable real-time, on-site sampling and analysing.

Tailored Fluorosurfactants through Controlled/Living Radical Polymerization for Highly Stable Microfluidic Droplet Generation.

Droplet-based microfluidics represents a disruptive technology in the field of chemistry and biology through the generation and manipulation of sub-microlitre droplets. To avoid droplet coalescence, fluoropolymer-based surfactants are commonly used to reduce the interfacial tension between two immiscible phases to stabilize droplet interfaces. However, the conventional preparation of fluorosurfactants involves multiple steps of conjugation reactions between fluorinated and hydrophilic segments to form multiple-block copolymers.

3D-printed liquid metal polymer composites as NIR-responsive 4D printing soft robot.

4D printing combines 3D printing with nanomaterials to create shape-morphing materials that exhibit stimuli-responsive functionalities. In this study, reversible addition-fragmentation chain transfer polymerization agents grafted onto liquid metal nanoparticles are successfully employed in ultraviolet light-mediated stereolithographic 3D printing and near-infrared light-responsive 4D printing. Spherical liquid metal nanoparticles are directly prepared in 3D-printed resins via a one-pot approach, providing a simple and efficient strategy for fabricating liquid metal-polymer composites.

A Non-Newtonian liquid metal enabled enhanced electrography.

Biopotential signals, like electrocardiography (ECG), electromyography (EMG), and electroencephalography (EEG), can help diagnose cardiological, musculoskeletal and neurological disorders. Dry silver/silver chloride (Ag/AgCl) electrodes are commonly used to obtain these signals. While a conductive hydrogel can be added to Ag/AgCl electrodes to improve the contact and adhesion between the electrode and the skin, dry electrodes are prone to movement.

Erratum: A crack compensation strategy for highly stretchable conductors based on liquid metal inclusions.

[This corrects the article DOI: 10.1016/j.isci.

Electro-mechano responsive elastomers with self-tunable conductivity and stiffness.

Materials with programmable conductivity and stiffness offer new design opportunities for next-generation engineered systems in soft robotics and electronic devices. However, existing approaches fail to harness variable electrical and mechanical properties synergistically and lack the ability to self-respond to environmental changes. We report an electro-mechano responsive Field's metal hybrid elastomer exhibiting variable and tunable conductivity, strain sensitivity, and stiffness.

3D actuation of foam-core liquid metal droplets.

Precise manipulation of liquid metal (LM) droplets possesses the potential to enable a wide range of applications in reconfigurable electronics, robotics, and microelectromechanical systems. Although a variety of methods have been explored to actuate LM droplets on a 2D plane, versatile 3D manipulation remains a challenge due to the difficulty in overcoming their heavy weight. Here, foam-core liquid metal (FCLM) droplets that can maintain the surface properties of LM while significantly reducing the density are developed, enabling 3D manipulation in an electrolyte.

Recent advances in non-optical microfluidic platforms for bioparticle detection.

The effective analysis of the basic structure and functional information of bioparticles are of great significance for the early diagnosis of diseases. The synergism between microfluidics and particle manipulation/detection technologies offers enhanced system integration capability and test accuracy for the detection of various bioparticles. Most microfluidic detection platforms are based on optical strategies such as fluorescence, absorbance, and image recognition.

Silver Nanoflakes-Enhanced Anisotropic Hybrid Composites for Integratable Pressure Sensors.

Flexible pressure sensors based on polymer elastomers filled with conductive fillers show great advantages in their applications in flexible electronic devices. However, integratable high-sensitivity pressure sensors remain understudied. This work improves the conductivity and sensitivity of PDMS-Fe/Ni piezoresistive composites by introducing silver flakes and magnetic-assisted alignment techniques.

A crack compensation strategy for highly stretchable conductors based on liquid metal inclusions.

Crack control strategies have been proven very useful for enhancing the stretchability of metal film-based stretchable conductors. However, existing strategies often suffer from the drawbacks of complicated preparation and predefined effective directions. Here, we propose a crack compensation strategy for preparing conductors featured with high stretchability by using liquid metal microparticles (LMMPs)-embedded polydimethylsiloxane (PDMS) as the substrate with a thin film of gold (Au) sputtered on the surface.

Connecting liquid metals with sound.

A stretchable conductive circuit is formed using a liquid metal-polymer composite.

Nanomaterial integrated 3D printing for biomedical applications.

3D printing technology, otherwise known as additive manufacturing, has provided a promising tool for manufacturing customized biomaterials for tissue engineering and regenerative medicine applications. A vast variety of biomaterials including metals, ceramics, polymers, and composites are currently being used as base materials in 3D printing. In recent years, nanomaterials have been incorporated into 3D printing polymers to fabricate innovative, versatile, multifunctional hybrid materials that can be used in many different applications within the biomedical field.

Engineering Polymers via Understanding the Effect of Anchoring Groups for Highly Stable Liquid Metal Nanoparticles.

Liquid metal nanoparticles (LMNPs) have recently attracted much attention as soft functional materials for various biorelated applications. Despite the fact that several reports demonstrate highly stable LMNPs in aqueous solutions or organic solvents, it is still challenging to stabilize LMNPs in biological media with complex ionic environments. LMNPs grafted with functional polymers (polymers/LMNPs) have been fabricated for maintaining their colloidal and chemical stability; however, to the best of our knowledge, no related work has been conducted to systematically investigate the effect of anchoring groups on the stability of LMNPs.

Microfluidic flow cytometry for blood-based biomarker analysis.

Flow cytometry has proven its capability for rapid and quantitative analysis of individual cells and the separation of targeted biological samples from others. The emerging microfluidics technology makes it possible to develop portable microfluidic diagnostic devices for point-of-care testing (POCT) applications. Microfluidic flow cytometry (MFCM), where flow cytometry and microfluidics are combined to achieve similar or even superior functionalities on microfluidic chips, provides a powerful single-cell characterisation and sorting tool for various biological samples.

Superelongation of Liquid Metal.

The ability to control interfacial tension electrochemically is uniquely available for liquid metals (LMs), in particular gallium-based LM alloys. This imparts them with excellent locomotion and deformation capabilities and enables diverse applications. However, electrochemical oxidation of LM is a highly dynamic process, which often induces Marangoni instabilities that make it almost impossible to elongate LM and manipulate its morphology directly and precisely on a 2D plane without the assistance of other patterning methods.

Light-controlled versatile manipulation of liquid metal droplets: a gateway to future liquid robots.

The controlled actuation of liquid metal (LM) droplets has recently shown great potential in developing smart actuating systems for applications in robotics. However, there is a lack of a simple approach for the precise manipulation of multiple LM droplets in a 2D plane, which hinders the development of complex control over droplets for realizing useful robotic applications. To overcome this challenge, here, a versatile and powerful light-induced manipulation of LM droplets is presented.

Exploiting machine learning for bestowing intelligence to microfluidics.

Intelligent microfluidics is an emerging cross-discipline research area formed by combining microfluidics with machine learning. It uses the advantages of microfluidics, such as high throughput and controllability, and the powerful data processing capabilities of machine learning, resulting in improved systems in biotechnology and chemistry. Compared to traditional microfluidics using manual analysis methods, intelligent microfluidics needs less human intervention, and results in a more user-friendly experience with faster processing.

A Liquid Metal Artificial Muscle.

Artificial muscles possess a vast potential in accelerating the development of robotics, exoskeletons, and prosthetics. Although a variety of emerging actuator technologies are reported, they suffer from several issues, such as high driving voltages, large hysteresis, and water intolerance. Here, a liquid metal artificial muscle (LMAM) is demonstrated, based on the electrochemically tunable interfacial tension of liquid metal to mimic the contraction and extension of muscles.

Reversible Underwater Adhesion for Soft Robotic Feet by Leveraging Electrochemically Tunable Liquid Metal Interfaces.

Soft crawling robots have potential applications for surveillance, rescue, and detection in complex environments. Despite this, most existing soft crawling robots either use nonadjustable feet to passively induce asymmetry in friction to actuate or are only capable of moving on surfaces with specific designs. Thus, robots often lack the ability to move along arbitrary directions in a two-dimensional (2D) plane or in unpredictable environments such as wet surfaces.