Sulfur Dioxide Degradation by Composite Photocatalysts Prepared by Recycled Fine Aggregates and Nanoscale Titanium Dioxide.

To alleviate the heavy burden on landfilling, construction and demolition wastes (C&DWs) are recycled and reused as aggregates in cementitious materials. However, the inherent characteristics of recycled fine aggregates (RFA), such as the high crushing index and high-water absorption, magnify the reusing difficulty. Nevertheless, attributing to the high porosity and high level of calcium hydroxides existing in the old mortar, RFA is featured with a high specific surface area and a high alkalinity.

Effect of Agriculture and Construction Wastes on the Properties of Magnesium Oxychloride Cement Mortar with Tourmaline Powder.

This research attempted to develop an environmentally-friendly functional building mortar by the combined use of agriculture wastes (agro-wastes) and construction wastes in magnesium oxychloride cement (MOC). The agro-wastes referred to corn stalk (CS) and saw dust (SD), which were used to improve the flexural properties of host cementitious material, whilst the construction wastes referred to recycled clay brick powder (CBP), which was employed to enhance compressive strength and water resistance. Moreover, tourmaline powder (TP) was added as a negative ion-inducing admixture, at a fixed dosage of 10% by weight of MgO, to bestow air-improving functions on the end products.

Use of wastes derived from earthquakes for the production of concrete masonry partition wall blocks.

Utilization of construction and demolition (C&D) wastes as recycled aggregates in the production of concrete and concrete products have attracted much attention in recent years. However, the presence of large quantities of crushed clay brick in some the C&D waste streams (e.g.

Properties of concrete blocks prepared with low grade recycled aggregates.

Low grade recycled aggregates obtained from a construction waste sorting facility were tested to assess the feasibility of using these in the production of concrete blocks. The characteristics of the sorted construction waste are significantly different from that of crushed concrete rubbles that are mostly derived from demolition waste streams. This is due to the presence of higher percentages of non-concrete components (e.