Adaptive Fabrication of Electrochemical Chips with a Paste-Dispensing 3D Printer.

Electrochemical (EC) detection is a powerful tool supporting simple, low-cost, and rapid analysis. Although screen printing is commonly used to mass fabricate disposable EC chips, its mask is relatively expensive. In this research, we demonstrated a method for fabricating three-electrode EC chips using 3D printing of relatively high-viscosity paste.

Introduced Hierarchically Ordered Porous Architecture on a Separator as an Efficient Polysulfide Trap toward High-Mass-Loading Li-S Batteries.

The severe shuttle effect and the depletion of active sulfur result in performance deterioration, presenting two formidable issues that must be overcome to achieve high-mass-loading lithium-sulfur batteries. Herein, we reported a composite separator by introducing carbon photonic crystals with a hierarchically ordered porous structure on a commercial separator. The ordered structure and interconnected hierarchical macro-meso-micropore network of the composite separator facilitate efficient trapping of polysulfides and rapid transport of lithium ions.

A precisely Assembled Wall-Like Architecture for High Lithium/Sodium Storage.

MXene nanosheets and ordered porous carbons both have their own advantages and disadvantages. Assembling and combining the advantages of the two will be a good choice for battery electrode hosts of active materials. In this work, an electrostatic separation-adsorption strategy is proposed to realize the ordered alternating self-assembly of MXene nanosheets and ordered porous carbon (MPOC), obtaining a unique wall-like porous material with a high conductivity and interconnected porous nanostructure, which strengthens the transfer rate of electrons and ions simultaneously.

Hoya-like Hierarchical Porous Architecture as Multifunctional Phosphorus Anode for Superior Lithium-Sodium Storage.

Designing nanostructured hosts with the merits of high conductivity, strong trapping ability, and long-term durability to improve the insulating nature and extreme volume change of red phosphorus (RP) is a promising option for the development of high-performance lithium/sodium-ion batteries (LIBs/SIBs). Here, a multifunctional RP immobilizer is proposed and fabricated, which comprises a nitrogen-doped hollow MXene sphere (NM) planted with the dual-sided porous carbon network (DCNM). In such a configuration, the highly conductive macroporous NM not only facilitates fast electron transport but also acts as the capturing center to entrap polyphosphide through strong chemical adsorption, while the uniformly distributed micromesoporous carbon network in or out of the sphere provides reliable RP accommodation and alleviates the volume expansion, as well as creates interpenetrating ion diffusion and electron transport channels.

Tailoring Ordered Porous Carbon Embedded with Cu Clusters for High-Energy and Long-Lasting Phosphorus Anode.

The natural insulating property and notorious pulverization of volume variation-induced materials during cycling pares the electrochemical activity of red phosphorous (RP) for lithium/sodium-ion batteries (LIBs/SIBs). To work out these issues, a tailored trimodal porous carbon support comprising highly ordered macropores and micro-mesoporous walls embedded with copper (Cu) nanoclusters (Cu-OMC) is proposed to confine RP. The construction of highly conductive copper-carbon wall facilitates fast electrons and ions transportation, while the interconnected and ordered porous structure not only creates enough space to resist the expansion effect of RP but also minimizes the ion diffusion length and enhances ion accessibility (the ion migration coefficient is ten times that of disordered porous carbon).

3D Ordered Porous Nanostructure Confers Fast Charge Transfer Rate and Reduces the Electrode Polarization in Thick Electrode.

Lithium batteries with high electrode thickness always possess a poor battery property due to electrode polarization along the thickness direction. Herein, a concept that the electrode polarization can be reduced through the fabrication of 3D ordered interconnected nanostructure in the electrode is put forward. A nitrogen-doped carbon photonic crystal (NCPC) with the ordered interconnected nanostructure is used in the electrode to prove the concept.

Dendrite-Free and Ultra-Long-Life Lithium Metal Anode Enabled via a Three-Dimensional Ordered Porous Nanostructure.

Constructing a stable non-dendritic lithium metal anode is the key to the development of high-energy batteries in the future. Herein, we fabricated nitrogen-doped carbon photonic crystals in situ in the macropores of carbon papers as a porous skeleton and confined hosts for metallic lithium. The large specific surface area of the carbon photonic crystal reduces the current density of the electrode.

Graphene/graphitic carbon nitride decorated with AgBr to boost photoelectrochemical performance with enhanced catalytic ability.

A novel graphene nanoplatelets (GNP) bridge between two semiconductors (AgBr and graphitic carbon nitride) was created to boost photoelectrochemical performance. The heterojunction created makes the whole system a Z-scheme catalyst. For the construction of this catalyst, the syringe pump methodology was adopted and different analytical techniques were used for the confirmation of structure and morphology.

Efficient Bifunctional Catalytic Electrodes with Uniformly Distributed NiN Active Sites and Channels for Long-Lasting Rechargeable Zinc-Air Batteries.

Freestanding bifunctional electrodes with outstanding oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) properties are of great significance for zinc-air batteries, attributed to the avoided use of organic binder and strong adhesion with substrates. Herein, a strategy is developed to fabricate freestanding bifunctional electrodes from the predeposited nickel nanoparticles (Ni-NCNT) on carbon fiber paper. The steric effect of monodispersed SiO nanospheres limits the configuration of carbon atoms forming 3D interconnected nanotubes with uniformly distributed NiN active sites.

Three-Dimensional-Ordered Porous Nanostructures for Lithium-Sulfur Battery Anodes and Cathodes Confer Superior Energy Storage Performance.

The nonuniformity of microscopic electrochemical reaction of electrodes essentially results in the partial reaction discrepancy and subsequent partial overheating, which is the most critical safety problem of the battery system in electric vehicles. Herein, we report a class of DLPC@S/DLPC@Li full cell based on a distinctly constructed double-layer photonic crystal (DLPC) with a three-dimensional-ordered interconnected structure. This full cell not only ensures the uniformity of microscopic electrochemical reaction but also solves common problems such as low conductivity of sulfur, poor cycle life, and lithium dendrite growth.

Enhanced Charge Transfer by Passivation Layer in 3DOM Ferroelectric Heterojunction for Water Oxidation in HCO /CO System.

Photoelectrochemical carbon dioxide conversion to fuels such as carbon monoxide, methanol, and ethylene exhibits great potential to solve energy issues. Unfortunately, CO conversion efficiency is still low due to violent charge recombination at the photoanode. Herein, a novel 3D macroporous ferroelectric heterojunction composed of BiFeO and LiNbO is developed by a template-assisted sol-gel method, aiming at facilitating charge transfer kinetics.

A Host-Configured Lithium-Sulfur Cell Built on 3D Nickel Photonic Crystal with Superior Electrochemical Performances.

The insulator of the sulfur cathode and the easy dendrites growth of the lithium anode are the main barriers for lithium-sulfur cells in commercial application. Here, a 3D NPC@S/3D NPC@Li full cell is reported based on 3D hierarchical and continuously porous nickel photonic crystal (NPC) to solve the problems of sulfur cathode and lithium anode at the same time. In this case, the 3D NPC@S cathode can not only offer a fast transfer of electron and lithium ion, but also effectively prevent the dissolution of polysulfides and the tremendous volume change during cycling, and the 3D NPC@Li anode can efficiently inhibit the growth of lithium dendrites and volume expansion, too.

Development of an accelerated leaching method for incineration bottom ash correlated to toxicity characteristic leaching protocol.

Heavy metals and some metalloids are the most significant inorganic contaminants specified in toxicity characteristic leaching procedure (TCLP) in determining the safety of landfills or further utilization. As a consequence, a great deal of efforts had been made on the development of miniaturized analytical devices, such as Microchip Electrophoresis (ME) and μTAS for on-site testing of heavy metals and metalloids to prevent spreading of those pollutants or decrease the reutilization period of waste materials such as incineration bottom ash. However, the bottleneck lied in the long and tedious conventional TCLP that requires 18 h of leaching.