Publications by authors named "Shau-Wei Tsai"

Optically pure 3-substituted glutarates can be prepared from the alcoholic ring-opening of cyclic anhydride derivatives, esterification of 3-substituted glutaric acid, and hydrolysis, alcoholysis, aminolysis, and ammonolysis of the diester derivatives via hydrolases or organocatalysts. Unfortunately, most of them mainly focus on the first-step desymmetrization, leading to the difficulty on producing optically pure enantiomers. As a general trend in lipase-catalyzed desymmetrization of 3-methylglutarates, poorer enantiomeric excesses with lower chemical yields were found, as the methyl substituent is relatively small to induce a high enzyme stereodiscrimination.

View Article and Find Full Text PDF

Dissolving microneedles (MNs) display high efficiency in delivering poorly permeable drugs and vaccines. Here, two-layer dissolving polymeric MN patches composed of gelatin and sodium carboxymethyl cellulose (CMC) were fabricated with a two-step casting and centrifuging process to localize the insulin in the needle and achieve efficient transdermal delivery of insulin. In vitro skin insertion capability was determined by staining with tissue-marking dye after insertion, and the real-time penetration depth was monitored using optical coherence tomography.

View Article and Find Full Text PDF

Optically pure (R)-β-butyrolactone as an important chiral building block in the syntheses of various biologically active compounds and biodegradable polymers was prepared from (R,S)-β-butyrolactone through kinetic resolution. Candida antarctica lipase B (CALB) with a high enantiomeric ratio of 198 enantioselectively catalyzed the ring opening of the racemate with methanol in methyl tert-butyl ether at 45 °C and yielded the remaining (R)-β-butyrolactone. A detailed kinetic analysis indicated that methanol and (R)- and (S)-methyl ester all acted as competitive inhibitors for the enzyme.

View Article and Find Full Text PDF

In the Candida antarctica lipase B-catalyzed hydrolysis of (R,S)-azolides derived from (R,S)-N-protected proline in water-saturated methyl tert-butyl ether (MTBE), high enzyme activity with excellent enantioselectivity (V (S) V (R) (-1)  > 100) for (R,S)-N-Cbz-proline 1,2,4-triazolide (1) and (R,S)-N-Cbz-proline 4-bromopyrazolide (2) was exploited in comparison with their corresponding methyl ester analog (3). Changing of the substrate structure, water content, solvent, and temperature was found to have profound influences on the lipase performance. On the basis of enzyme activity and enantioselectivity and solvent boiling point, the best reaction condition of using 1 as the substrate in water-saturated MTBE at 45 °C was selected and further employed for the successful resolution of (R,S)-N-Cbz-pipecolic 1,2,4-triazolide (5) and (R,S)-N-Boc-nipecotic 1,2,4-triazolide (9).

View Article and Find Full Text PDF
Article Synopsis
  • * The optimal conditions for the reaction involve (R,S)-1-phenylethyl 4-bromopyrazole carbamate in water-saturated diisopropyl ether at 45 °C, achieving an enantiomeric ratio of 124 through kinetic analysis.
  • * Thermodynamic parameters were estimated to show a relationship between enthalpy and entropy, and the method's application was expanded to include other (R,S)-4-bromopyrazole carbamates derived from various (R,S)-alcohols
View Article and Find Full Text PDF

The best reaction condition of Candida antartica lipase B as biocatalyst, 3-(2-pyridyl)pyrazole as leaving azole, and water-saturated methyl t-butyl ether as reaction medium at 45°C were first selected for performing the hydrolytic resolution of (R,S)-2-(4-chlorophenoxyl) azolides (1-4). In comparison with the kinetic resolution of (R,S)-2-phenylpropionyl 3-(2-pyridyl)pyrazolide or (R,S)-α-methoxyphenylacetyl 3-(2-pyridyl)pyrazolide at the same reaction condition, excellent enantioselectivity with more than two order-of-magnitudes higher activity for each enantiomer was obtained. The resolution was then extended to other (R,S)-3-(2-pyridyl)pyrazolides (5-7) containing 2-chloro, 3-chloro, or 2,4-dichloro substituent, giving good (E > 48) to excellent (E > 100) enantioselectivity.

View Article and Find Full Text PDF

Dynamic synergistic effects in cellulosic bioconversion have been revealed between Trichoderma reesei cellulases and β-glucosidases (BGLs) from six Taiwanese fungi. A high level of synergy (8.9-fold) was observed with the addition of Chaetomella raphigera BGL to T.

View Article and Find Full Text PDF

The highest cellulases production from Daldinia caldariorum 263 (D-263) was found among Daldinia eschscholzii and Daldinia childiae. Three cellulases, one xylanase and one β-glucosidase of the molecular weights 55, 43, 34, 30, and 105 kDa, respectively, were determined by zymographic sodium dodecyl sulfate polyacrylamide gel electrophoresis. From the N-terminal sequencing, the major cellulase CelA belonging to glycosyl hydrolase family 5 was determined.

View Article and Find Full Text PDF

Esterases, lipases, and serine proteases have been applied as versatile biocatalysts for preparing a variety of chiral compounds in industry via the kinetic resolution of their racemates. In order to meet this requirement, three approaches of enzyme engineering, medium engineering, and substrate engineering are exploited to improve the enzyme activity and enantioselectivity. With the hydrolysis of (R,S)-mandelates in biphasic media consisting of isooctane and pH 6 buffer at 55 degrees C as the model system, the strategy of combined substrate engineering and covalent immobilization leads to an increase of enzyme activity and enantioselectivity from V(S)/(E(t)) = 1.

View Article and Find Full Text PDF

A thermally stable esterase (SNSM-87) from Klebsiella oxytoca is explored as an enantioselective biocatalyst for the hydrolytic resolution of (R,S)-2-hydroxycarboxylic acid esters in biphasic media, where the best methyl esters possessing the highest enantioselectivity and reactivity are selected and elucidated in terms of the structure-enantioselectivity correlations and substrate partitioning in the aqueous phase. With (R,S)-2-chloromandelates as the model substrates, an expanded Michaelis-Menten mechanism for the rate-limiting acylation step is adopted for the kinetic analysis. The Brønsted slope of 25.

View Article and Find Full Text PDF

In comparison with the biocatalyst engineering and medium engineering approaches, very few examples have been reported on using the substrate engineering approach such as substrate-assisted catalysis (SAC) for naturally occurring or engineered lipases and serine proteases to improve the enzyme activity and enantioselectivity. By employing lipase-catalyzed hydrolysis of (R,S)-naproxen esters in water-saturated isooctane as the model system, we demonstrate the proton shuttle device to the leaving alcohol of the substrate as a new means of SAC to effectively improve the lipase activity or enantioselectivity. The result cannot only provide a strong evidence for the rate-limiting proton transfer for the bond-breaking of tetrahedron intermediate of the acylation step, but also sheds light for performing the hydrolysis, transesterification or aminolysis in organic solvents for the ester substrate that originally lipases cannot catalyze, but now can after introducing the device.

View Article and Find Full Text PDF

In recent years, the Carica papaya lipase (CPL) is attracting more and more interest. This hydrolase, being tightly bonded to the water-insoluble fraction of crude papain, is thus considered as a "naturally immobilized" biocatalyst. To date, several CPL applications have already been described: (i) fats and oils modification, derived from the sn-3 selectivity of CPL as well as from its preference for short-chain fatty acids; (ii) esterification and inter-esterification reactions in organic media, accepting a wide range of acids and alcohols as substrates; (iii) more recently, the asymmetric resolution of different non-steroidal anti-inflammatory drugs (NSAIDs), 2-(chlorophenoxy)propionic acids, and non-natural amino acids.

View Article and Find Full Text PDF

With the hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl esters via a partially purified papaya lipase (PCPL) in water-saturated isooctane as the model system, the enzyme activity, and enantioselectivty is altered by adding a variety of organo-soluble bases that act as either enzyme activators (i.e., TEA, MP, TOA, DPA, PY, and DMA) or enzyme inhibitors (i.

View Article and Find Full Text PDF

The enzymatic properties of Plumeria rubra latex have been evaluated for the first time, showing a high activity in both hydrolysis and synthesis reactions, and compared to the biocatalytic behavior of babaco (Vasconcellea x Heilbornii cv.) latex. Both biocatalysts have been optimized by studying the various parameters that influence reaction kinetics.

View Article and Find Full Text PDF

With the hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioesters in water-saturated isooctane as a model system, improvements of the specific lipase activity and thermal stability were found when a crude Carica papaya lipase (CPL) was partially purified and employed as the biocatalyst. The partially purified Carica papaya lipase (PCPL) was furthermore explored as an effective enantioselective biocatalyst for the hydrolytic resolution of (R,S)-profen thioesters in water-saturated organic solvents. The kinetic analysis in water-saturated isooctane indicated that both acyl donor and acyl acceptor have profound influences on the lipase activity, E-value, and enantioselectivity.

View Article and Find Full Text PDF

For the first time, the Carica papaya lipase (CPL) stored in crude papain is explored as a potential enantioselective biocatalyst for obtaining chiral acids from their racemic thioesters. Hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioester in water-saturated organic solvents is employed as a model system for studying the effects of temperature and solvents on lipase activity and enantioselectivity. An optimal temperature of 60 degrees C, based on the initial rate of (S)-thioester and a high enantiomeric ratio (i.

View Article and Find Full Text PDF

Polypropylene powders as the adsorbent for organic solution containing n-hexadecane and olive oil were employed as the carbon source for producing an alkaline lipase from Acinetobacter radioresistens. The best volumetric ratio of n-hexadecane to olive oil around 5 for lipase production was determined from shake-flask and fermentation cultivations. The existence of a maximum time course lipase activity of the aqueous phase was attributed to the compensation effects of olive oil on cell growth and lipase production, repression of lipase synthesis by oleic acid, and lipase adsorption on the supports.

View Article and Find Full Text PDF

Lipases immobilized on polypropylene powders have been used as the biocatalyst in the enantioselective hydrolysis of (S)-naproxen from racemic naproxen thioesters in isooctane, in which trioctylamine was added to perform in situ racemization of the remaining (R)-thioester substrate. A detailed study of the kinetics for hydrolysis and racemization indicates that increasing the trioctylamine concentration can activate and stabilize the lipase as well as enhance the racemization and non-stereoselective hydrolysis of the thioester. Effects of the aqueous pH value and trioctylamine concentration on (S)-naproxen dissociation and partitioning in the aqueous phase as well as the transportation in a hollow fiber membrane were further investigated.

View Article and Find Full Text PDF

The racemization of (S)-profen 2,2,2-trifluoroethyl thioesters in isooctane with trioctylamine as base was carried out, in which the Hammett equation log(k(int)) = 3.584sigma - 3.745 was successfully applied to describe the electron-withdrawing effect of the substituents to the alpha-phenyl moiety of the thioesters.

View Article and Find Full Text PDF