MXene-Bimetallic Hybrids via Mixed Molten Salts Etching for Kinetics-Enhanced and Dendrite-Free Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries with high theoretical energy density (2600 Wh kg) are considered to be one of the most promising secondary batteries. However, the practical application of Li-S batteries is limited by the polysulfides shuttling and unstable lithium metal anodes. Herein, an asymmetric separator (CACNM@PP), composed of Co-Ni/MXene (CNM) on the cathode and Cu-Ag/MXene (CAM) on the anode for high-performance Li-S batteries is reported.

Interfacial Engineering of Ru Nanocluster-Modified TiO Nanotube-Assisted Regulation of Lithium Polysulfide Reactions.

The inhibition of lithium polysulfide (LiPS) diffusion and the acceleration of reaction kinetics are two major challenges for the practical application of lithium-sulfur (Li-S) batteries. Herein, through an interface engineering strategy, a multifunctional sulfur host based on Ru nanocluster-modified TiO nanotubes (TiO-Ru) was designed. The TiO-Ru interface field effect, combined with the hollow nanotube structure and the strong chemical action of TiO, enhanced the LiPS trapping ability and inhibited the "shuttle effect".

Furnishing Continuous Efficient Bidirectional Polysulfide Conversion for Long-Life and High-Loading Lithium-Sulfur Batteries via the Built-In Electric Field.

Most catalysts cannot accelerate uninterrupted conversion of polysulfides, resulting in poor long-cycle and high-loading performance of lithium-sulfur (Li-S) batteries. Herein, rich p-n junction CoS /ZnS heterostructures embedded on N-doped carbon nanosheets are fabricated by ion-etching and vulcanization as a continuous and efficient bidirectional catalyst. The p-n junction built-in electric field in the CoS /ZnS heterostructure not only accelerates the transformation of lithium polysulfides (LiPSs), but also promotes the diffusion and decomposition for Li S the from CoS to ZnS avoiding the aggregation of lithium sulfide (Li S).

Construction of Co O /ZnO Heterojunctions in Hollow N-Doped Carbon Nanocages as Microreactors for Lithium-Sulfur Full Batteries.

Lithium-sulfur (Li-S) batteries are promising alternatives of conventional Li-ion batteries attributed to their remarkable energy densities and high sustainability. However, the practical applications of Li-S batteries are hindered by the shuttling effect of lithium polysulfides (LiPSs) on cathode and the Li dendrite formation on anode, which together leads to inferior rate capability and cycling stability. Here, an advanced N-doped carbon microreactors embedded with abundant Co O /ZnO heterojunctions (CZO/HNC) are designed as dual-functional hosts for synergistic optimization of both S cathode and Li metal anode.

Electrochemical Resistive Switching in Nanoporous Hybrid Films by One-Step Molecular Layer Deposition.

An organic-inorganic hybrid resistive random-access memory based on a nanoporous zinc-based hydroquinone (Zn-HQ) thin film has been constructed with a Pt/Zn-HQ/Ag sandwich structure. The porous Zn-HQ functional layer was directly fabricated by a one-step molecular layer deposition. These Pt/Zn-HQ/Ag devices show a typical electroforming-free bipolar resistive switching characteristic with lower operation voltages and higher on/off ratio above 10.

CuO/SrTiCrO Heterojunction Photocatalyst for the Efficient Degradation of Isopropanol under Visible Light Irradiation.

A heterojunction of CuO and Cr-doped SrTiO (SrTiCrO) was designed for selective photocatalytic isopropanol (IPA) oxidation under visible light irradiation. The photocatalytic oxidation of IPA was measured in a fixed-bed reactor. Cr dopants can increase the light absorption and improve the activity of the catalyst.

In Situ Formation of Polycyclic Aromatic Hydrocarbons as an Artificial Hybrid Layer for Lithium Metal Anodes.

Nonuniform Li deposition causes dendrites and low Coulombic efficiency (CE), seriously hindering the practical applications of Li metal. Herein, we developed an artificial solid-state interphase (SEI) with planar polycyclic aromatic hydrocarbons (PAHs) on the surface of Li metal anodes by a facile in situ formation technology. The resultant dihydroxyviolanthron (DHV) layers serve as the protective layer to stabilize the SEI.

Tailoring Stress and Ion-Transport Kinetics via a Molecular Layer Deposition-Induced Artificial Solid Electrolyte Interphase for Durable Silicon Composite Anodes.

Silicon is considered as a blooming candidate material for next-generation lithium-ion batteries due to its low electrochemical potential and high theoretical capacity. However, its commercialization has been impeded by the poor cycling issue associated with severe volume changes (∼380%) upon (de)lithiation. Herein, an organic-inorganic hybrid film of titanicone via molecular layer deposition (MLD) is proposed as an artificial solid electrolyte interphase (SEI) layer for Si anodes.

Electrochemical Fabrication of Monolithic Electrodes with Core/Shell Sandwiched Transition Metal Oxide/Oxyhydroxide for High-Performance Energy Storage.

Transition metal oxides/oxyhydroxides (TMOs) are promising high-capacity materials for electrochemical energy storage. However, the low rate and poor cyclability hinder practical applications. In this work, we developed a general electrochemical route to fabricate monolithic core/shell sandwiched structures, which are able to significantly improve the electrochemical properties of TMO electrodes by electrically wiring the insulating active materials and alleviating the adverse effects caused by volume changes using engineered porous structures.