Highly Efficient Photocatalytic Degradation of Imidacloprid Based on Iron Metal-Organic Frameworks of Mesoporous NH-MIL-88b/Graphite Carbon Nitride Nanocomposites by Visible Light Driven in Aqueous Media.

Pesticides that protect crops from insects and other pests are some of the main causes of water pollution. Imidacloprid (IMC) is the most widely used insecticide in the world and should be removed from the environment. This work aims to prepare mesoporous nanocomposites to increase the photodegradation efficiency of IMC.

Adsorption properties of low-cost synthesized nanozeolite L for efficient removal of toxic methylene blue dye from aqueous solution.

In this study, nanozeolite L was applied for the removal of toxic methylene blue dye (MB) to evaluate its feasibility as an effective adsorbent. Synthesized nanozeolite L was characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electronic microscopy (SEM), Brunauer-Emmett-Teller (BET), and energy-dispersive X-ray analysis (EDX) methods to determine its basic physicochemical properties. Batch adsorption studies were performed as a function of pH, adsorbent dose, contact time, initial MB concentration, and temperature.

Förster resonance energy transfer-based molecularly imprinted polymer /amine-functionalized metal-organic framework nanocomposite for trace level detection of 4-nitrophenol.

Herein, luminescent metal-organic framework (LMOF) is modified with molecularly imprinted polymer (MIP) and employed as an efficient and cost-effective nanoprobe for the determination of 4-nitrophenol (4-NP). Amine-UiO-66 support with unique luminescence property is chosen for creating the template of 4-NP using MIP to construct a highly selective LMOF-based sensor (amine-UiO-66/MIP nanocomposite). The imprinted sites formed at the surface of LMOF significantly enhance the selectivity of the probe for 4-NP over its analogs.

Design of turn-on luminescent sensor based on nanostructured molecularly imprinted polymer-coated zirconium metal-organic framework for selective detection of chloramphenicol residues in milk and honey.

Herein, an optical sensor based on nanostructured molecularly imprinted polymer (MIP) coated on a luminescent zirconium metal-organic framework (MIP/Zr-LMOF) is introduced, and its performance is investigated for the fluorescent determination of chloramphenicol (CAP) antibiotic residues in milk and honey. To fabricate the sensor, the surface of Zr-LMOF is modified with MIP in the presence of CAP template, resulting in the introduction of recognition sites for antibiotic molecules. The porous structure of Zr-LMOF with specific binding sites for CAP recognition benefiting from coated MIP leads to selective and sensitive detection of antibiotic.

Synthesis of zeolite NaY supported Mn-doped ZnS quantum dots and investigation of their photodegradation ability towards organic dyes.

In this work, Mn-doped ZnS quantum dots capped by L-cysteine (Mn@ZnS/L-cyst) and polyethylene glycol (Mn@ZnS/PEG) and also Mn-doped ZnS on zeolite NaY (Mn@ZnS/Y) were synthesized. These compounds were characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible and fluorescence spectroscopy. Then, the photodegradation ability of these three photocatalysts was investigated for degradation of 4',5'-dibromofluorescein dye under ultraviolet irradiation.

Green synthesis of fluorescent PEG-ZnS QDs encapsulated into Co-MOFs as an effective sensor for ultrasensitive detection of copper ions in tap water.

In this work, a novel and highly fluorescent (FL) metal-organic framework (MOF)-based host-guest hybrid system was developed through encapsulation of polyethylene glycol (PEG)-capped ZnS quantum dots (QDs) into zeolitic imidazolate framework (ZIF)-67 at ambient temperature. This new composite material was characterized by FT-IR, XRD, TEM, UV-Vis absorption and FL spectroscopy, and then exploited as fluorescence sensor for highly sensitive and selective detection of Cu (II) ions in water samples. The as-prepared PEG-ZnS QDs@ZIF-67 nanohybrids took advantages of both accumulation effect in ZIF-67 and FL sensitivity and selectivity in ZnS QDs toward analyte-Cu.

High-efficiency purification of sulforaphane from the broccoli extract by nanostructured SBA-15 silica using solid-phase extraction method.

Sulforaphane, a promising phytochemical, has received much attention in recent decades as a potential anticarcinogenic compound. In this research work, a novel, specific and affordable method has been developed for the separation and purification of natural sulforaphane from broccoli extract using SBA-15 mesoporous silica. SBA-15 was found to be the most efficient in the purification of sulforaphane compared to some of the conventionally used adsorbents and zeolites.

Gold-copper bimetallic nanoparticles supported on nano P zeolite modified carbon paste electrode as an efficient electrocatalyst and sensitive sensor for determination of hydrazine.

In this report, a facile, efficient and low cost electrochemical sensor based on bimetallic Au-Cu nanoparticles supported on P nanozeolite modified carbon paste electrode (Au-Cu/NPZ/CPE) was constructed and its efficiency for determination of hydrazine in trace level was studied. For this purpose, agro waste material, stem sweep ash (SSA) was employed as the starting material (silica source) for the synthesis of nano P zeolite (NPZ). After characterization of the synthesized NPZ by analytical instruments (scanning electronic microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy), construction of Au-Cu/NPZ/CPE was performed by three steps procedure involving preparation of nano P zeolite modified carbon paste electrode (NPZ/CPE), introducing Cu ions into nano zeolite structure by ion exchange and electrochemical reduction of Cu ions upon applying constant potential.

Quantum dots and ionic liquid-sensitized effect as an efficient and green catalyst for the sensitive determination of glucose.

A novel fluorescence (FL) method using water-soluble CdSe quantum dots (QDs) is proposed for the fluorometric determination of hydrogen peroxide and glucose. Water-soluble CdSe QDs were synthesized by using thioglycolic acid as stabilizer in aqueous solutions. The nanoparticles were structurally and optically characterized by X-ray powder diffraction (XRD), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), UV-Vis absorption spectroscopy, photoluminescence (PL) emission spectroscopy and transmission electron microscope (TEM).

Synthesis and characterization of NaX nanozeolite using stem sweep as silica source and application of Ag-modified nanozeolite in electrocatalytic reduction of H2O2.

Nanozeolite is one of the three dimensional nanoporous materials consisting of extremely accessible surface area and shorter diffusion pathways. In this study, NaX nanozeolite is synthesized using the hydrothermal method from natural silica source of stem sweep ash (SSA). The synthesized nanoparticles were characterized using X-ray diffraction, scanning electronic microscopy, Brunauer-Emmett-Teller (BET) and FT-IR techniques.

The use of imidazolium ionic liquid/copper complex as novel and green catalyst for chemiluminescent detection of folic acid by Mn-doped ZnS nanocrystals.

A novel chemiluminescence (CL) method using water-soluble Mn-doped ZnS quantum dots (QDs) as CL emitter is proposed for the chemiluminometric determination of folic acid in pharmaceutical formulation. Water-soluble Mn-doped ZnS QDs were synthesized by using L-cysteine as stabilizer in aqueous solutions. The nanoparticles were structurally and optically characterized by X-ray powder diffraction (XRD), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), UV-Vis absorption spectroscopy and photoluminescence (PL) emission spectroscopy.

A novel luminol chemiluminescent method catalyzed by silver/gold alloy nanoparticles for determination of anticancer drug flutamide.

It was found that silver/gold alloy nanoparticles enhance the chemiluminescence (CL) of the luminol-H2O2 system in alkaline solution. The studies of UV-Vis spectra, CL spectra, effects of concentrations luminol, hydrogen peroxide and silver/gold alloy nanoparticles solutions were carried out to explore the CL enhancement mechanism. Flutamide was found to quench the CL signals of the luminol-H2O2 reaction catalyzed by silver/gold alloy nanoparticles, which made it applicable for the determination of flutamide.

Determination of epinephrine in pharmaceutical formulation by an optimized novel luminescence method using CdS quantum dots as sensitizer.

In this article, a novel chemiluminescence method using water-soluble CdS quantum dots (QDs) as sensitizers is proposed for the chemiluminometric determination of epinephrine. The method is based on the quenching effect of epinephrine on the chemiluminescence emission generated by the mixing of CdS quantum dots (QDs) with hydrogen carbonate (HCO3(-)) in the presence of hydrogen peroxide (H2O2) in an alkaline medium. The optimization of variables influencing the chemiluminescence response of the method has been carried out by using experimental design.

Removal of Cd(II) from aquatic system using Oscillatoria sp. biosorbent.

Biosorption of Cd(II) ions from aqueous solutions by native and dried Oscillatoria sp. Cyanobacterium biomass was investigated in the batch mode. The Oscillatoria sp.

A Box-Behnken design for determining the optimum experimental condition of the fungicide (Vapam) sorption onto soil modified with perlite.

In the present study, response surface methodology (RSM) based on the Box-Behnken design (BBD) was employed to investigate the effects of the different operating conditions on the removal of the fungicide (Vapam) onto soil modified with perlite using sorption process. The process parameters such as pH of the fungicide solution (2, 5 and 8), temperature (15, 25 and 35°C), shaking time (2, 13 and 24 h) and the percentage of perlite in the modified soil (0, 2 and 4 %) were investigated using a four-factor-three-level Box-Behnken design at an initial fungicide concentration of C(0) = 1.6 mg/L as a fixed input parameter.

Parameter optimization of the fungicide (Vapam) sorption onto soil modified with clinoptilolite by Taguchi method.

This study employs the Taguchi optimization methodology to optimize the effective parameters for the pesticide (Vapam) sorption onto soil modified with natural zeolite (clinoptilolite). The experimental factors and their ranges chosen for determination of the effective parameters were: initial Vapam concentration (0.4-1.