Ecotoxicity assessment of additives in commercial biodegradable plastic products: Implications for sustainability and environmental risk.

Biodegradable plastics have gained popularity as environmentally friendly alternatives to conventional petroleum-based plastics, which face recycling and degradation challenges. Although the biodegradability of these plastics has been established, research on their ecotoxicity remains limited. Biodegradable plastics may still contain conventional additives, including toxic and non-degradable substances, to maintain their functionality during production and processing.

Structural evaluation of Poly(lactic acid) degradation at standardized composting temperature of 58 degrees.

The accumulation of petroleum-based plastics on our planet is causing serious environmental pollution. Biodegradable plastics, promoted as eco-friendly solutions, hold the potential to address this issue. However, their impact on the environment and the mechanisms of their natural degradation remain inadequately understood.

Network of cyano-p-aramid nanofibres creates ultrastiff and water-rich hydrospongels.

The structure-property paradox of biological tissues, in which water-rich porous structures efficiently transfer mass while remaining highly mechanically stiff, remains unsolved. Although hydrogel/sponge hybridization is the key to understanding this phenomenon, material incompatibility makes this a challenging task. Here we describe hydrogel/sponge hybrids (hydrospongels) that behave as both ultrastiff water-rich gels and reversibly squeezable sponges.

Circular waste management: Superworms as a sustainable solution for biodegradable plastic degradation and resource recovery.

Bioplastics offer a promising solution to plastic pollution, however, their production frequently relies on edible biomass, and their degradation rates remain inadequate. This study investigates the potential of superworms (Zophobas atratus larvae) for polybutylene succinate (PBS) waste management, aiming to achieve both resource recovery and biodegradation. Superworms exclusively fed on PBS for a month exhibited the same survival rate as those on a standard bran diet.

Biodegradable, Water-Resistant, Anti-Fizzing, Polyester Nanocellulose Composite Paper Straws.

Among plastic items, single-use straws are particularly detrimental to marine ecosystems because such straws, including those made of poly(lactic acid) (PLA), are sharp and extremely slowly degradable in the ocean. While paper straws are promising alternatives, they exhibit hydration-induced swelling even when coated with a non-degradable plastic coating and promote effervescence (fizzing) in soft drinks owing to their surface heterogeneities. In this study, upgraded paper straw is coated with poly(butylene succinate) cellulose nanocrystal (PBS/CNC) composites.

Analysis of volatile organic compounds produced during incineration of non-degradable and biodegradable plastics.

As plastic consumption has increased, environmental problems associated with the accumulation of plastic wastes have started to emerge. These include the non-degradability of plastic and its disintegration into sub-micron particles. Although some biodegradable plastic products have been developed to relieve the landfill and leakage burden, a significant portion of discarded plastics are inevitably still incinerated.

Biosynthesis of Polyhydroxybutyrate with Cellulose Nanocrystals Using .

Polyhydroxybutyrate (PHB) is a natural polyester synthesized by several microorganisms. Moreover, it has excellent biodegradability and is an eco-friendly material because it converts water and carbon dioxide as final decomposition products. However, the applications of PHB are limited because of its stiffness and brittleness.

Aramid Nanofiber Templated In Situ SAr Polymerization for Maximizing the Performance of All-Organic Nanocomposites.

The performance limits of conventional super engineering plastics with inorganic nanofillers are surpassed by all-organic nanocomposites prepared via in situ SAr polymerization of polysulfone (PSU) in the presence of a highly dispersed aramid nanofiber (ANF) solution. The latter is directly used, bypassing the energy-consuming, nanostructure-damaging workup process. Using only a 0.

Study on the Synthetic Characteristics of Biomass-Derived Isosorbide-Based Poly(arylene ether ketone)s for Sustainable Super Engineering Plastic.

Demand for the development of novel polymers derived from biomass that can replace petroleum resources has been increasing. In this study, biomass-derived isosorbide was used as a monomer in the polymerization of poly(arylene ether ketone)s, and its synthetic characteristics were investigated. As a phase-transfer catalyst, crown ether has increased the weight-average molecular weight of polymers over 100 kg/mol by improving the reaction efficiency of isosorbide and minimizing the effect of moisture.

Sustainable and recyclable super engineering thermoplastic from biorenewable monomer.

Environmental and health concerns force the search for sustainable super engineering plastics (SEPs) that utilise bio-derived cyclic monomers, e.g. isosorbide instead of restricted petrochemicals.

Sustainable Boron Nitride Nanosheet-Reinforced Cellulose Nanofiber Composite Film with Oxygen Barrier without the Cost of Color and Cytotoxicity.

This paper introduces a boron nitride nanosheet (BNNS)-reinforced cellulose nanofiber (CNF) film as a sustainable oxygen barrier film that can potentially be applied in food packaging. Most commodity plastics are oxygen-permeable. CNF exhibits an ideal oxygen transmission rate (OTR) of <1 cc/m²/day in highly controlled conditions.

Environmentally-Friendly Synthesis of Carbonate-Type Macrodiols and Preparation of Transparent Self-Healable Thermoplastic Polyurethanes.

Carbonate-type macrodiols synthesized by base-catalyzed polycondensation of co-diols and dimethyl carbonate as an environmentally-friendly route were subsequently utilized for the preparation of transparent and self-healable thermoplastic polyurethanes (TPUs) containing a carbonate-type soft segment. Three types of macrodiols, obtained from mono, dual and triple diol-monomers for target molecular weights of 1 and 1.5 kg mol, were analyzed by ¹H NMR integration and the OH titration value.

Superior Toughness and Fast Self-Healing at Room Temperature Engineered by Transparent Elastomers.

The most important properties of self-healing polymers are efficient recovery at room temperature and prolonged durability. However, these two characteristics are contradictory, making it difficult to optimize them simultaneously. Herein, a transparent and easily processable thermoplastic polyurethane (TPU) with the highest reported tensile strength and toughness (6.

Techniques for Updating Pedestrian Network Data Including Facilities and Obstructions Information for Transportation of Vulnerable People.

Demand for a Pedestrian Navigation Service (PNS) is on the rise. To provide a PNS for the transportation of vulnerable people, more detailed information of pedestrian facilities and obstructions should be included in Pedestrian Network Data (PND) used for PNS. Such data can be constructed efficiently by collecting GPS trajectories and integrating them with the existing PND.

Pd-catalyzed decarboxylative coupling of propiolic acids: one-pot synthesis of 1,4-disubstituted 1,3-diynes via Sonogashira-homocoupling sequence.

One-pot synthesis of symmetric 1,4-disubstituted 1,3-diynes from iodoarenes and propiolic acid via Sonogashira reaction followed by Pd-catalyzed decarboxylative homocoupling is developed in high yields. Also, this system allows the one-pot synthesis of unsymmetric 1,4-disubstituted 1,3-diynes by cross-coupling of two different 3-substituted propiolic acids.