Insights on the role of cryoprotectants in enhancing the properties of bioinks required for cryobioprinting of biological constructs.

Preservation and long-term storage of readily available cell-laden tissue-engineered products are major challenges in expanding their applications in healthcare. In recent years, there has been increasing interest in the development of off-the-shelf tissue-engineered products using the cryobioprinting approach. Here, bioinks are incorporated with cryoprotective agents (CPAs) to allow the fabrication of cryopreservable tissue constructs.

A protocol to study the effect of targeted parental education intervention to identify early childhood development disorder - multisite interventional study.

Background: In India, approximately 3.5 million children are affected by Developmental Delay (DD), often stemming from preterm births. These delays contribute to neurological and motor development delays, placing a significant financial burden on families.

Preparation of thermoresponsive & enzymatically crosslinkable gelatin-gellan gum bioink: A protein-polysaccharide hydrogel for 3D bioprinting of complex soft tissues.

Developing superior bioinks present several challenges in achieving ideal properties such as biocompatibility, viscosity, degradation rates & mechanical properties which are required to make functional tissue constructs. Various attempts have been made to prepare excellent bioink compositions that are suitable to address the above challenges. Herein, a versatile combination of gelatin (GL) - gellan gum (GG) bioink was successfully formulated & the bioink 7.

Innovative spiral nerve conduits: Addressing nutrient transport and cellular activity for critical-sized nerve defects.

Large-gap nerve defects require nerve guide conduits (NGCs) for complete regeneration and muscle innervation. Many NGCs have been developed using various scaffold designs and tissue engineering strategies to promote axon regeneration. Still, most are tubular with inadequate pore sizes and lack surface cues for nutrient transport, cell attachment, and tissue infiltration.

Development and Assessment of a Multipurpose Herbal Cream With Moringa oleifera Lam.

Background: Lam. (Moringaceae) is an indigenous tree extensively used as a nutrient and an antioxidant. In addition to its medicinal attributes, it possesses a promising role in moisturizing and cleansing the skin.

Fabrication of Anatomically Equivalent Pectin-Based Multifilament Nerve Conduits.

Reuniting denuded nerve ends after a long segmental peripheral nerve defect is challenging due to delayed axonal regeneration and incomplete, nonspecific reinnervation, as conventional hollow nerve guides fail to ensure proper fascicular complementation and obstruct axonal guidance across the defects. This study focuses on fabricating multifilament conduits using a plant-derived anionic polysaccharide, pectin, where the abundant availability of carboxylate (COO-) functional groups in pectin facilitates instantaneous sol-gel transition upon interaction with divalent cations. Despite their advantages, pectin hydrogels encounter structural instability under physiological conditions.

Effective inhibition of Sesbania grandiflora bioactive compounds against C-di-GMP phosphodiesterase of Pseudomonas aeruginosa.

Sesbania grandiflora also known as Agasthya has potent antibiofilm activity and its bioactive compounds obtained from the leaves are medicarpin, isoniazid and 4-methyl oxazole. Extra cellular polymeric substances (EPS) created by the bacterium involve the formation of biofilm and this causes the infections such as nosocomial infections, and urinary tract infections. Pseudomonas aeruginosa has been linked with high levels of intracellular Cyclic-di-Guanosine Monophosphate (c-di-GMP; PA4781) in biofilm formation.

Treatment resistance to melanoma therapeutics on a single cell level.

Therapy targeting the BRAF-MEK cascade created a treatment revolution for patients with BRAF mutant advanced melanoma. Unfortunately, 80% patients treated will progress by 5 years follow-up. Thus, it is imperative we study mechanisms of melanoma progression and therapeutic resistance.

Biofabrication & cryopreservation of tissue engineered constructs for on-demand applications.

Tissue engineered constructs prepared using conventional scaffold-based approaches have the potential to repair or regenerate damaged tissues and organs. Various scaffold fabrication strategies such as electrospinning, solvent casting, particulate leaching, gas foaming, hydrogels, freeze-drying, and 3D bioprinting have been used to fabricate artificial tissues. In recent times, 3D bioprinting has been predominantly used in various biomedical fields, including healthcare and pharmaceutical applications due to precision in 3D geometry.

Exploring Salivary Biomarkers for Tumor Diagnosis: A Narrative Review.

A promising method for non-invasive cancer diagnosis and prognosis is through salivary biomarkers. By utilizing the distinct characteristics of saliva and the progress made in biomarker studies, these markers provide more accurate diagnoses for a wider range of malignancies. An attempt was made to thoroughly investigate the field of salivary biomarkers for tumor prognosis and diagnosis, with an emphasis on their use in various cancer forms.

Probable paralytic rabies in a dog: ante-mortem clinical diagnosis implications in limited resource settings.

Introduction: Rabies is a dreadful zoonotic viral disease that affects animals and humans with a fatality rate of 100%. This report aims to create awareness among the veterinarians and general public about the paralytic form of rabies in order to understand the antemortem clinical diagnosis implications in limited resource settings, so as to follow the post-exposure prophylaxis at the golden hour period of rabies transmission.

Case Presentation: A one-year-old female dog was presented to the Ambulatory Clinic Unit, Veterinary Clinical Complex, Veterinary College and Research Institute, Theni, Tamil Nadu, India with the ailment of a dropped jaw and was unable to swallow food and water for the past three days.

Efficacy of 3D printed anatomically equivalent thermoplastic polyurethane guide conduits in promoting the regeneration of critical-sized peripheral nerve defects.

Three-dimensional (3D) printing is an emerging tool for creating patient-specific tissue constructs analogous to the native tissue microarchitecture. In this study, anatomically equivalent 3D nerve conduits were developed using thermoplastic polyurethane (TPU) by combining reverse engineering and material extrusion (i.e.

Nanomaterial Biosensors in Salivary Diagnosis of Oral Cancer: A Scoping Review.

Oral cancer is among the highest in the Indian subcontinent. Advanced stages of oral cancer are associated with severe morbidity and higher mortality. Salivary diagnosis is novel and non-invasive.

HDR or SDR? A Subjective and Objective Study of Scaled and Compressed Videos.

We conducted a large-scale study of human perceptual quality judgments of High Dynamic Range (HDR) and Standard Dynamic Range (SDR) videos subjected to scaling and compression levels and viewed on three different display devices. While conventional expectations are that HDR quality is better than SDR quality, we have found subject preference of HDR versus SDR depends heavily on the display device, as well as on resolution scaling and bitrate. To study this question, we collected more than 23,000 quality ratings from 67 volunteers who watched 356 videos on OLED, QLED, and LCD televisions, and among many other findings, observed that HDR videos were often rated as lower quality than SDR videos at lower bitrates, particularly when viewed on LCD and QLED displays.

Awareness Levels About Specialty Services Offered by the Faculty of Dentistry in Sebha, Libya.

Background: Assessment of awareness levels about any hospital is critical to judge its current standings and plan for future development. Limited literature is available about dental health in Libya.

Aim: This study aimed to study the awareness and perception of the various specialty services offered by the Faculty of Dentistry (SDC), Sebha University for their quality and preference.

Identification, Evaluation, and Correction of Supracrestal Tissue Attachment (Previously Biologic Width) Violation: A Case Presentation With Literature Review.

The supracrestal tissue attachment (SCTA) is the new terminology for biologic width. SCTA is defined as the physiologic dimension of a solitary functional unit composed of junctional epithelium and connective tissue attachment. Its preservation is critical for the well-being of periodontal health.

Spatiotemporal Deep Learning-Based Cine Loop Quality Filter for Handheld Point-of-Care Echocardiography.

The reliability of automated image interpretation of point-of-care (POC) echocardiography scans depends on the quality of the acquired ultrasound data. This work reports on the development and validation of spatiotemporal deep learning models to assess the suitability of input ultrasound cine loops collected using a handheld echocardiography device for processing by an automated quantification algorithm (e.g.

Sensing of Quercetin With Cobalt-Doped Manganese Nanosystems by Electrochemical Method.

Background: The pressing need for precise, quick, and affordable detection of diverse biomolecules has led to notable developments in the realm of biosensors. Quercetin, a biomolecule rich in flavonoids predominantly found in our diet, is sensed by the electrochemical method. The electrochemical properties show remarkable improvement when MnO (MO) is doped with cobalt (Co).

Developing Odontoma in the Mandible of an Eight-Year-Old Boy.

Benign mixed odontogenic tumors have been repeatedly classified and reclassified over the past few decades. Odontoma is considered a hamartoma due to its slow growth and non-aggressive nature. We present an interesting case of developing odontoma in an eight-year-old boy.

Furcation Involvement in Periodontal Disease: A Narrative Review.

Furcation-involved teeth, commonly seen in dental practice, have a higher likelihood of needing extraction as the severity of periodontal furcation involvement increases. Studies consistently show that periodontitis in teeth with multiple roots significantly increases the risk of tooth loss, especially in the area where the furcation is involved. These furcation defects pose a major problem for dentists because of their location, accessibility issues, and the unpredictable healing process.

Combating Alcohol Adduct Impurity in Immunosuppressant Drug Product Manufacturing: A Scientific Investigation for Enhanced Process Control.

Objective: This research aims to elucidate critical impurities in process validation batches of tacrolimus injection formulations, focusing on identification and characterization of previously unreported impurity at RRT 0.42, identified as the tacrolimus alcohol adduct. The potential root causes for the formation of new impurity was determined using structured risk assessment by cause and effect fishbone diagram.

Multichannel Conduits with Fascicular Complementation: Significance in Long Segmental Peripheral Nerve Injury.

Despite the advances in tissue engineering approaches, reconstruction of long segmental peripheral nerve defects remains unsatisfactory. Although autologous grafts with proper fascicular complementation have shown meaningful functional recovery according to the Medical Research Council Classification (MRCC), the lack of donor nerve for such larger defect sizes (>30 mm) has been a serious clinical issue. Further clinical use of hollow nerve conduits is limited to bridging smaller segmental defects of denuded nerve ends (<30 mm).

Biosynthesis of Zinc Nanoparticles From Actinobacterium Streptomyces Species and Their Biological Potential.

Background: In today's world, antibiotic-resistant microorganisms are a major concern. There is solid evidence that metal nanoparticles (NPs) tend to have antimicrobial properties. The most effective substitute for antibiotic resistance is the incorporation of metal NPs.

Carboxymethyl cellulose-agarose hydrogel in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibers: A novel tissue engineered skin graft.

Healing chronic and critical-sized full-thickness wounds is a major challenge in the healthcare sector. Scaffolds prepared using electrospinning and hydrogels serve as effective treatment options for wound healing by mimicking the native skin microenvironment. Combining synthetic nanofibers with tunable hydrogel properties can effectively overcome limitations in skin scaffolds made only with nanofibers or hydrogels.

Tuning thermoresponsive properties of carboxymethyl cellulose (CMC)-agarose composite bioinks to fabricate complex 3D constructs for regenerative medicine.

3D bioprinting has emerged as a viable tool to fabricate 3D tissue constructs with high precision using various bioinks which offer instantaneous gelation, shape fidelity, and cytocompatibility. Among various bioinks, cellulose is the most abundantly available natural polymer & widely used as bioink for 3D bioprinting applications. To mitigate the demanding crosslinking needs of cellulose, it is frequently chemically modified or blended with other polymers to develop stable hydrogels.