Irradiation Effects on Polymer-Grafted Gold Nanoparticles for Cancer Therapy.

In the context of cancer treatment, gold nanoparticles (AuNPs) are considered as very promising radiosensitizers. Here, well-defined polymer-grafted AuNPs were synthesized and studied under gamma irradiation to better understand the involved radiosensitizing mechanisms. First, various water-soluble and well-defined thiol-functionalized homopolymers and copolymers were obtained through atom transfer radical polymerization.

Covalent grafting of chitosan onto stainless steel through aryldiazonium self-adhesive layers.

Although the conventional methods for strong attachment of chitosan onto stainless steel require many steps in different solvents, it has been demonstrated in this work that covalent grafting of chitosan on a steel surface can be easily achieved through the formation of a self-adhesive surface based on aryldiazonium seed layers. Initially, a polyaminophenyl layer is grafted on a stainless steel surface by means of the one-step GraftFast(TM) process (diazonium induced anchoring process). The grafted aminophenyl groups are then converted to an aryldiazonium seed layer by simply dipping the substrate in a sodium nitrite acidic solution.

A H-evolving photocathode based on direct sensitization of MoS3 with an organic photovoltaic cell.

An organic solar cell based on a poly-3-hexylthiophene (P3HT): phenyl-C-butyric acid (PCBM) bulk hetero-junction was directly coupled with molybdenum sulfide resulting in the design of a new type of photocathode for the production of hydrogen. Both the light-harvesting system and the catalyst were deposited by low-cost solution-processed methods, i.e.

Nano-Electrochemistry and Nano-Electrografting with an Original Combined AFM-SECM.

This study demonstrates the advantages of the combination between atomic force microscopy and scanning electrochemical microscopy. The combined technique can perform nano-electrochemical measurements onto agarose surface and nano-electrografting of non-conducting polymers onto conducting surfaces. This work was achieved by manufacturing an original Atomic Force Microscopy-Scanning ElectroChemical Microscopy (AFM-SECM) electrode.

Molecular engineering of a cobalt-based electrocatalytic nanomaterial for H₂ evolution under fully aqueous conditions.

The viability of a hydrogen economy depends on the design of efficient catalytic systems based on earth-abundant elements. Innovative breakthroughs for hydrogen evolution based on molecular tetraimine cobalt compounds have appeared in the past decade. Here we show that such a diimine-dioxime cobalt catalyst can be grafted to the surface of a carbon nanotube electrode.

A Janus cobalt-based catalytic material for electro-splitting of water.

The future of energy supply depends on innovative breakthroughs regarding the design of cheap, sustainable and efficient systems for the conversion and storage of renewable energy sources. The production of hydrogen through water splitting seems a promising and appealing solution. We found that a robust nanoparticulate electrocatalytic material, H(2)-CoCat, can be electrochemically prepared from cobalt salts in a phosphate buffer.

Spontaneous grafting of diazonium salts: chemical mechanism on metallic surfaces.

The spontaneous reaction of diazonium salts on various substrates has been widely employed since it consists of a simple immersion of the substrate in the diazonium salt solution. As electrochemical processes involving the same diazonium salts, the spontaneous grafting is assumed to give covalently poly(phenylene)-like bonded films. Resistance to solvents and to ultrasonication is commonly accepted as indirect proof of the existence of a covalent bond.

Relationship between polypyrrole morphology and electrochemical activity towards oxygen reduction reaction.

The relationship between the morphology of polypyrrole and their electrocatalytic performances towards the oxygen reduction reaction (ORR) in alkaline media is described; annealed polypyrrole with granular- and tubules-like morphology exhibited different catalytic efficiencies.

Metal-free nitrogen-containing carbon nanotubes prepared from triazole and tetrazole derivatives show high electrocatalytic activity towards the oxygen reduction reaction in alkaline media.

High-performance oxygen reduction reaction (ORR) catalysts based on metal-free nitrogen-containing precursors and carbon nanotubes are reported. The investigated systems allow the evaluation of the effect of nitrogen-containing groups towards ORR and the results show that the catalysts are compatible with the conditions encountered in alkaline fuel cells, exhibiting good catalytic activity and stability compared with conventional Pt/C electrocatalyst.

Cyanide-bridged NiCr and alternate NiFe-NiCr magnetic ultrathin films on functionalized Si(100) surface.

Sequential growth in solution (SGS) was performed for the magnetic cyanide-bridged network obtained from the reaction of Ni(H(2)O)(2+) and Cr(CN)(6)(3-) (referred to as NiCr) on a Si(100) wafer already functionalized by a Ni(II) complex. The growth process led to isolated dots and a low coverage of the surface. We used the NiFe network as a template to improve the growth of the magnetic network.

Sequential growth in solution of NiFe Prussian blue coordination network nanolayers on Si(100) surfaces.

Controlling the elaboration of Coordination Networks (CoNet) on surfaces at the nanoscale remains a challenge. One suitable technique is the Sequential Growth in Solution (SGS), which has the advantage to be simple, cheap and fast. We addressed two issues in this article: i) the controlled synthesis of ultra thin films of CoNet (thickness lower than 10 nm), and ii) the investigation of the influence of the precursors' concentration on the growth process.

Electrochemical performance of annealed cobalt-benzotriazole/CNTs catalysts towards the oxygen reduction reaction.

One of the major limitations yet to the global implementation of polymer electrolyte membrane fuel cells (PEMFCs) is the cathode catalyst. The development of efficient platinum-free catalysts is the key issue to solve the problem of slow kinetics of the oxygen reduction reaction (ORR) and high cost. We report a promising catalyst for ORR prepared through the annealing treatment under inert conditions of the cobalt-benzotriazole (Co-BTA) complex supported on carbon nanotubes (CNTs).

3D amino-induced electroless plating: a powerful toolset for localized metallization on polymer substrates.

The "3D amino-induced electroless plating" (3D-AIEP) process is an easy and cost-effective way to produce metallic patterns onto flexible polymer substrates with a micrometric resolution and based on the direct printing of the mask with a commercial printer. Its effectiveness is based on the covalent grafting onto substrates of a 3D polymer layer which presents the ability to entrap Pd species. Therefore, this activated Pd-loaded and 3D polymer layer acts both as a seed layer for electroless metal growth and as an interdigital layer for enhanced mechanical properties of the metallic patterns.

Ethanol-mediated metal transfer printing on organic films.

Ethanol-mediated metal transfer printing (mTP) is a soft method, which allows to efficiently deposit metals onto various organic surfaces for applications in organic electronics. This simple approach in based on the stronger adhesion of the metals to the organic materials in the presence of thin ethanol layer between the metallized PDMS and the substrate due to the capillary action. Patterns with a resolution of at least 20 μm have been obtained on organic polymeric materials and photoresists without heating or applied pressure.

Microscopic study of a ligand induced electroless plating process onto polymers.

The ligand induced electroless plating (LIEP) process was recently developed and thoroughly demonstrated with one of the most used polymers for plating processes: acrylonitrile-butadiene-styrene (ABS). This generic process is based, thanks to the use of diazonium salts as precursors, on the covalent grafting of a thin layer of poly(acrylic acid) (PAA) acting as ligand for metallic salts onto pristine polymer surfaces. This strategy takes advantage of the PAA ion exchange properties.

Growth and density control of nanometric nickel-iron cyanide-bridged objects on functionalized Si(100) surface.

Isolated nanometric objects of the nickel-iron cyanide-bridged coordination network are obtained by a sequential growth on "molecular seeds" anchored on Si(100) surfaces. Control of the density and the size of the nano-objects is achieved by imposing a growth process without side nucleation.

ABS polymer electroless plating through a one-step poly(acrylic acid) covalent grafting.

A new, efficient, palladium- and chromium-free process for the electroless plating of acrylonitrile-butadiene-styrene (ABS) polymers has been developed. The process is based on the ion-exchange properties of poly(acrylic acid) (PAA) chemically grafted onto ABS via a simple and one-step method that prevents using classical surface conditioning. Hence, ABS electroless plating can be obtained in three steps, namely: (i) the grafting of PAA onto ABS, (ii) the copper Cu(0) seeding of the ABS surface, and (iii) the nickel or copper metallization using commercial-like electroless plating bath.

Selective electroless copper deposition on self-assembled dithiol monolayers.

The paper reports the use of self-assembled monolayers (SAMs) of dithiols to induce electroless copper deposition on a gold substrate. The metallization catalyst, palladium nanoparticles, is bound on the dithiol SAM. The assembly process is followed by IR and X-ray photoelectron spectroscopies to confirm the formation of a monolayer with bound catalyst.

From hydrogenases to noble metal-free catalytic nanomaterials for H2 production and uptake.

Interconversion of water and hydrogen in unitized regenerative fuel cells is a promising energy storage framework for smoothing out the temporal fluctuations of solar and wind power. However, replacement of presently available platinum catalysts by lower-cost and more abundant materials is a requisite for this technology to become economically viable. Here, we show that the covalent attachment of a nickel bisdiphosphine-based mimic of the active site of hydrogenase enzymes onto multiwalled carbon nanotubes results in a high-surface area cathode material with high catalytic activity under the strongly acidic conditions required in proton exchange membrane technology.

Surface homogeneity of anion exchange membranes: a chronopotentiometric study in the overlimiting current range.

Electrotransport of sodium chloride near and through the ASV anion exchange membrane was first investigated. Chronopotentiometric and current-voltage characteristics results have shown that the ASV membrane acts as a totally conducting plane with respect to the transport of NaCl electrolyte. SEM and AFM images contributed to confirm the overall homogeneous surface of the membrane.

Localized electrografting of vinylic monomers on a conducting substrate by means of an integrated electrochemical AFM probe.

Combinations of scanning electrochemical microscopy (SECM) with other scanning probe microscopy techniques, such as atomic force microscopy (AFM), show great promise for directing localized modification, which is of great interest for chemical, biochemical and technical applications. Herein, an atomic force scanning electrochemical microscope is used as a new electrochemical lithographic tool (L-AFM-SECM) to locally electrograft, with submicrometer resolution, a non-conducting organic coating on a conducting substrate.

The in situ characterization and structuring of electrografted polyphenylene films on silicon surfaces. An AFM and XPS study.

An atomic force microscope was used so as to structure by nanofriction films of polynitrophenylene electrografted on substrates of n-type silicon (100) with the native oxide on the top of the surface. AFM measurements of thin films thickness have been carried out in the electrolytic solution for different applied potentials during the electrografting. This investigation allows (i) to determine the relationship between the applied potential and the final thickness of electrografted polyphenylene films and (ii) to specify how the thin layers grow.

Grafting a monolayer of superparamagnetic cyanide-bridged coordination nanoparticles on Si(100).

The grafting of a monolayer of 6 nm superparamagnetic cyanide-bridged CsNiCr nanoparticles was achieved on a Ni(II)-functionalized Si(100) substrate; magnetic studies reveals that the grafted nanoparticles are nearly magnetically isolated within the monolayer.

Monitoring the formation of TTF dimers by Na+ complexation.

The formation of the two dimeric species [(TTF)2]+* and (TTF+*)2 can be monitored by complexation of Na+ on a calix[4]arene-TTF assembly.