Analytical quality by design-based development of a capillary electrophoresis method for Omeprazole impurity profiling.

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer.

Innovative Reversed-Phase Chromatography Platform Approach for the Fast and Accurate Characterization of Membrane Vesicles' Protein Patterns.

Outer membrane vesicles (OMVs) have been widely explored to develop vaccine candidates for bacterial pathogens due to their ability to combine adjuvant properties with immunogenic activity. OMV expresses a variety of proteins and carbohydrate antigens on their surfaces. For this reason, there is an analytical need to thoroughly characterize the species expressed at their surface: we here present a simple and accurate reversed-phase ultrahigh-performance liquid chromatography (RP-UPLC) method developed according to quality by design principles.

Optimization of hydrolysis conditions of amino acid analysis for UHPLC-UV antigens content determination: Bexsero vaccine a case study.

In the present study the compositional analysis of the amino acids released by the acidic hydrolysis of the vaccine antigens was approached as an alternative to the dye-binding methods, for improvement of the quality control. In particular, the Analytical Quality by Design principles were undertaken in optimizing the hydrolysis conditions of the antigens to be applied prior to the quantitation by UHPLC-UV. Bexsero was used as a case study; it is a recombinant meningococcal B vaccine and one of its critical quality attributes is the content of the three core protein antigens, namely Neisseria Heparin Binding Antigen, factor H binding protein and Neisseria adhesin A, in the final formulation.

Analysis of Volatile Hydrocarbons (Pentene Dimers and Terpenes) in Extra Virgin Olive Oil: Optimization by Response Surface Methodology and Validation of HS-SPME-GC-MS Method.

A head space-solid phase microextraction-gas chromatography-mass spectrometery (HS-SPME-GC-MS) method for the simultaneous analysis of pentene dimers from lipoxygenase (LOX) pathway, monoterpenes, and sesquiterpenes in extra virgin olive oil (EVOO) was proposed. A Doehlert design was performed; the conditions of the HS-SPME preconcentration step (extraction temperature, extraction time, sample amount, and desorption time) were optimized by response surface methodology, allowing defining the method operable design region. A quantitative method was set up using the multiple internal standard normalization approach: four internal standards were used, and the most suitable one was selected for area normalization of each external standard.

Analytical Quality by Design-Compliant Development of a Cyclodextrin-Modified Micellar ElectroKinetic Chromatography Method for the Determination of Trimecaine and Its Impurities.

In 2022, the International Council for Harmonisation released draft guidelines Q2(R2) and Q14, intending to specify the development and validation activities that should be carried out during the lifespan of an analytical technique addressed to assess the quality of medicinal products. In the present study, these recommendations were implemented in Capillary Electrophoresis method development for the quality control of a drug product containing trimecaine, by applying Analytical Quality by Design. According to the Analytical Target Profile, the procedure should be able to simultaneously quantify trimecaine and its four impurities, with specified analytical performances.

Innovative thermally assisted on-line solid phase extraction-reversed phase liquid chromatography applied to targeted nutrimetabolomics in human biofluids.

In this study, the use of thermal desorption in on-line solid phase extraction coupled with reversed phase liquid chromatography (on-line SPE-LC) was for the first time proposed and demonstrated for the desorption of analytes strongly retained by multiple interaction polymeric sorbents. In detail, this analytical strategy was applied to the on-line SPE-LC targeted analysis of a model set of 34 human gut metabolites characterized by heterogeneous physicochemical properties (i.e.

Millet Fermented by Different Combinations of Yeasts and Lactobacilli: Effects on Phenolic Composition, Starch, Mineral Content and Prebiotic Activity.

Millet is the sixth-highest yielding grain in the world and a staple crop for millions of people. Fermentation was applied in this study to improve the nutritional properties of pearl millet. Three microorganism combinations were tested: (FPM1), plus (FPM2) and plus (FPM3).

New Trends in the Quality Control of Enantiomeric Drugs: Quality by Design-Compliant Development of Chiral Capillary Electrophoresis Methods.

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output.

Assessment of bioaccumulation of glyphosate and aminomethylphosphonic acid in marine mussels using capillary electrophoresis with light-emitting diode-induced fluorescence detection.

Glyphosate or N-(phosphonomethyl)glycine, widely used as herbicide in agriculture to control weeds and to facilitate harvesting, has been included in Group 2A pollutants (probably carcinogenic to humans) by the International Agency for Research on Cancer (IARC). In intensive agricultural areas, runoff and soil leaching are likely to drive glyphosate to surface waters, where the compound is often detected together with its main microbial metabolite, aminomethylphosphonic acid (AMPA). In the present study a method based on capillary electrophoresis coupled with light-emitting diode-induced fluorescence detection has been developed and validated for the determination of the two compounds in whole soft mass of marine mussels (Mytilus galloprovincialis).

Quality by Design in optimizing the extraction of (poly)phenolic compounds from Vaccinium myrtillus berries.

Quality by Design was adopted for developing an effective extraction procedure of (poly)phenolic compounds from bilberry (Vaccinium myrtillus L.) fruits, using a pooled sample of berries from different regions of Ukraine. Mechanical solvent extraction, microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE) were investigated by screening matrices.

Application of Experimental Design Methodologies in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: A Review.

Chirality is one of the major issues in pharmaceutical research and industry. Capillary electrophoresis (CE) is an interesting alternative to the more frequently used chromatographic techniques in the enantioseparation of pharmaceuticals, and is used for the determination of enantiomeric ratio, enantiomeric purity, and in pharmacokinetic studies. Traditionally, optimization of CE methods is performed using a univariate one factor at a time (OFAT) approach; however, this strategy does not allow for the evaluation of interactions between experimental factors, which may result in ineffective method development and optimization.

A simple and selective electrochemical magneto-assay for sea lice eDNA detection developed with a Quality by Design approach.

Environmental DNA (eDNA) is a novel, non-invasive sampling procedure that allows the obtaining of genetic material directly from environmental samples without any evidence of biological sources. The eDNA methodology can greatly benefit from coupling it to reliable, portable and cost-effective tools able to perform decentralized measurements directly at the site of need and in resource-limited settings. Herein, we report a simple method for the selective analysis of eDNA using a magneto-assay with electrochemical detection.

Analytical quality by design in the development of a solvent-modified micellar electrokinetic chromatography method for the determination of sitagliptin and its related compounds.

A solvent-modified micellar electrokinetic chromatography method was developed following the Quality by Design approach for the simultaneous determination of sitagliptin (SIT), an oral antihyperglycemic drug, and its main impurities derived from the synthesis process. The separation system was identified in the scouting phase and was made by sodium dodecyl sulphate (SDS) micelles with the addition of n-butanol and methanol. The knowledge space was investigated through an asymmetric screening matrix, taking into consideration eight critical method parameters (CMPs) involving the composition of the background electrolyte in terms of buffer concentration and pH, the concentration of surfactants and organic modifiers, and voltage.

Quality by design optimization of a liquid chromatographic-tandem mass spectrometric method for the simultaneous analysis of structurally heterogeneous pharmaceutical compounds and its application to the rapid screening in wastewater and surface water samples by large volume direct injection.

This study focused on the Analytical Quality by Design (AQbD) optimization of the chromatographic separation and mass spectrometric detection of a wide group of structurally heterogeneous model pharmaceutical compounds (PhCs) and transformation products (TPs), chosen to cover the challenging issues of the co-presence of compounds characterized by (i) a wide range of physicochemical properties, (ii) the same mass transitions, and (iii) different ionisation modes. Italian consumption of PhCs were also considered as election criteria of target analytes. Octadecyl and pentafluorophenyl stationary phases, acetonitrile/methanol ratios and acidity of the eluents, column temperature, initial organic phase percentage, and elution gradient were investigated by AQbD, aiming at optimizing critical resolutions, sensitivities, and analysis time.

Optimization and validation of a method based on QuEChERS extraction and liquid chromatographic-tandem mass spectrometric analysis for the determination of perfluoroalkyl acids in strawberry and olive fruits, as model crops with different matrix characteristics.

A QuEChERS method was optimized and validated for the LC-MS/MS analysis of perfluoro-n-pentanoic acid (PFPeA), perfluoro-1-butanesulfonic acid (PFBuS), perfluoro-n-hexanoic acid (PFHxA), perfluoro-n-heptanoic acid (PFHpA), perfluoro-1-hexanesulfonic acid (PFHxS), perfluoro-n-octanoic acid (PFOA), perfluoro-n-nonanoic acid (PFNA), perfluoro-1-octanesulfonic acid (PFOS) and perfluoro-n-decanoic acid (PFDA) in freeze-dried strawberry and olive, as model fruits characterized by very different chemical compositions. The method was evaluated for apparent recovery, intra-day and inter-day precision, matrix effect and recovery. The method optimized for strawberry provided for most compounds absolute values of matrix effect (|ME%|) ≤ 11%, except for PFHxA, which showed a signal suppression of 22%.

Physicochemical properties and sorption capacities of sawdust-based biochars and commercial activated carbons towards ethoxylated alkylphenols and their phenolic metabolites in effluent wastewater from a textile district.

Three biochars were produced using sawdust from waste biomass, via a simple pyrolysis thermal conversion at 450, 650, and 850 °C (BC450, BC650, and BC850), without any activation process. These materials, together with vegetal and mineral commercial activated carbons (VAC and MAC), were characterized for their elemental composition, Brunauer-Emmett-Teller surface area, t-plot microporosity and Barrett-Joyner-Halenda mesoporosity. Moreover, iodine, phenol and methylene blue porosity indexes were measured.

Optimized hydrolytic methods by response surface methodology to accurately estimate the phenols in cereal by HPLC-DAD: The case of millet.

Extraction of free and bound phenols from millet in acidic and basic hydrolytic conditions were compared for the first time. Acidic hydrolysis was able to extract the highest amount of total phenolic compounds (up to 178 mg/100 g) while the basic hydrolysis underestimates the phenolic concentration. Our findings pointed out for the first time that methyl ferulate is naturally present as bound phenol in millet.

Quantitative amino acids profile of monofloral bee pollens by microwave hydrolysis and fluorimetric high performance liquid chromatography.

Bee pollen is an attractive resource in the field of alternative remedies and thanks to the content of carbohydrates, crude fibers, proteins and lipids must be considered as a supplementary food of high potential rate. In characterization of bee pollen with the aim to define its value in human nutrition, the amino acids profile is one of the most important attributes. In the present study, the determination of amino acids composition of different monofloral bee pollen samples was obtained by an approach combining microwave acidic hydrolysis (60 min at 150 °C instead of 22 h at 120 °C in conventional oven) followed by derivatization using 9-fluorenylmethylchloroformate (FMOC-Cl) and separation of amino acids derivatives using a Phenomenex Kinetex core-shell 5 μm C18 (150 x 4.

Removal efficiency and mass balance of polycyclic aromatic hydrocarbons, phthalates, ethoxylated alkylphenols and alkylphenols in a mixed textile-domestic wastewater treatment plant.

In this work the occurrence and fate of polycyclic aromatic hydrocarbons (PAHs), phthalic acid esters (PAEs), mono and diethoxylate alkylphenols (APEOs) and alkylphenols (APs) have been investigated during a two-weeks period in a facility treating mixed textile-domestic wastewater (Prato, Italy). The wastewater treatment plant (WWTP) consists of primary sedimentation, activated sludge biological oxidation, secondary sedimentation, clariflocculation and ozonation. The sludge is treated within the facility by thickening, dewatering and final incineration, thus providing the almost quantitative removal of the adsorbed micropollutants.

Analytical quality by design: Development and control strategy for a LC method to evaluate the cannabinoids content in cannabis olive oil extracts.

Cannabidiol (CBD) and Δ-tetrahydrocannabinol (Δ-THC) are considered as the most interesting cannabinoids in Cannabis sativa L. for the clinical practice. Since 2013, the Italian law allows pharmacists to prepare and dispense cannabis extracts to patients under medical prescription, and requires the evaluation of CBD and Δ-THC content in cannabis extracts before sale.

A new MS compatible HPLC-UV method for Teicoplanin drug substance and related impurities, part 1: Development and validation studies.

Teicoplanin is a glycopeptide antibiotic prepared by fermentation from cultures of Actinoplanes teichomyceticus, used as drug of last resort for the treatment of bacterial infections in humans. This study, which is the first in a series of two parts, describes the development of a LC method for the separation of Teicoplanin drug substance and its related impurities compatible with MS detection. The separation conditions for Teicoplanin were set on a LiChrospher 100 RP-18 column under gradient elution with a mobile phase composed of ammonium formate 25 mM at pH 6.

Risk-based approach for method development in pharmaceutical quality control context: A critical review.

Pharmaceutical regulatory bodies increasingly require the implementation of systematic approaches in pharmaceutical product development. Quality control methods play a key role in the control strategy of drugs manufacturing to assure their quality. A risk-based approach in the analytical method development is strongly recommended to ensure that the method performances fit the purpose of the method during its entire life-cycle.

Combining excitation-emission matrix fluorescence spectroscopy, parallel factor analysis, cyclodextrin-modified micellar electrokinetic chromatography and partial least squares class-modelling for green tea characterization.

In this study, an alternative analytical approach for analyzing and characterizing green tea (GT) samples is proposed, based on the combination of excitation-emission matrix (EEM) fluorescence spectroscopy and multivariate chemometric techniques. The three-dimensional spectra of 63 GT samples were recorded using a Perkin-Elmer LS55 luminescence spectrometer; emission spectra were recorded between 295 and 800 nm at excitation wavelength ranging from 200 to 290 nm, with excitation and emission slits both set at 10 nm. The excitation and emission profiles of two factors were obtained using Parallel Factor Analysis (PARAFAC) as a 3-way decomposition method.