Characterization of bipolar plates manufactured with various Pb/C ratios for unitized regenerative fuel cell system.

The weight reduction of the bipolar plate (BP) is essential for commercializing unitized regenerative fuel cells (URFCs). In order to lighten the weight of the bipolar plate, we have used Pb/C composite powder as a cost-effective primary material, which is a mixture of low-density graphite and lead. Further, varied lead-carbon weight ratios (1: 8, 1:4, 1:1, 4:1, and 8:1) were investigated for fabricating the bipolar plate by hot-pressing process adding styrene-butadiene rubber (SBR) as a binder.

Understanding the Residence Time Distribution in a Transient Inline Spiking System: Modeling, Experiments, and Simulations.

A transient inline spiking system is a promising tool for evaluating the performance of a virus filter in continuous operation. For better implementation of the system, we performed a systematic analysis to understand the residence time distribution (RTD) of inert tracers in the system. We aimed to understand the RTD of a salt spike, not retained onto or within the membrane pore, to focus on its mixing and spreading within the processing units.

Effect of Colloidal Interactions and Hydrodynamic Stress on Particle Deposition in a Single Micropore.

Clogging is ubiquitous. It happens in a wide range of material processing and causes severe performance degradation or process breakdown. In this study, we investigate clogging dynamics in a single micropore by controlling the surface property of the particle and processing condition.

Development of a transient inline spiking system for evaluating virus clearance in continuous bioprocessing-Proof of concept for virus filtration.

The development of continuous/connected bioprocesses requires new approaches for viral clearance validation, both for specific unit operations and for the overall process. In this study, we have developed a transient inline spiking system that can be used to evaluate virus clearance at distinct time points during prolonged operation of continuous bioprocesses. The proof of concept for this system was demonstrated by evaluating the viral clearance for a virus filtration step, both with and without a prefilter upstream of the virus filter.

Scale-up issues for commercial depth filters in bioprocessing.

Significant increases in cell density and product titer have led to renewed interest in the application of depth filtration for initial clarification of cell culture fluid in antibody production. The performance of these depth filters will depend on the local pressure and velocity distribution within the filter capsule, but these are very difficult to probe experimentally, leading to challenges in both process design and scale-up. We have used a combination of carefully designed experimental studies and computational fluid dynamics (CFD) to examine these issues in both lab-scale (Supracap 50) and pilot-scale (Stax ) depth filter modules, both employing dual-layer lenticular PDH4 media containing diatomaceous earth.

Fouling Mitigation via Chaotic Advection in a Flat Membrane Module with a Patterned Surface.

Fouling mitigation using chaotic advection caused by herringbone-shaped grooves in a flat membrane module is numerically investigated. The feed flow is laminar with the Reynolds number (Re) ranging from 50 to 500. In addition, we assume a constant permeate flux on the membrane surface.

Design Optimization for a Microfluidic Crossflow Filtration System Incorporating a Micromixer.

In this study, we report on a numerical study on design optimization for a microfluidic crossflow filtration system incorporated with the staggered herringbone micromixer (SHM). Computational fluid dynamics (CFD) and the Taguchi method were employed to find out an optimal set of design parameters, mitigating fouling in the filtration system. The flow and the mass transfer characteristics in a reference SHM model and a plain rectangular microchannel were numerically investigated in detail.

Nanothin Coculture Membranes with Tunable Pore Architecture and Thermoresponsive Functionality for Transfer-Printable Stem Cell-Derived Cardiac Sheets.

Coculturing stem cells with the desired cell type is an effective method to promote the differentiation of stem cells. The features of the membrane used for coculturing are crucial to achieving the best outcome. Not only should the membrane act as a physical barrier that prevents the mixing of the cocultured cell populations, but it should also allow effective interactions between the cells.