Effect of alkalizing agent on abuse deterrent potential of multiple-unit ingestion of bilayer abuse-deterrent extended-release tablets using propranolol as model drug for opioids overdose crisis.

The objective of present study is to develop bilayer abuse-deterrent extended-release tablets (ADERTs) using propranolol HCl as model drug for opioids overdose crisis. Bilayer ADERTs were fabricated by direct compression and formulated with polymer matrix in extended-release drug layer coupled with alkalizing and aversive agents in fast-disintegrating pH modifying layer. Various alkalizing agents, like magnesium hydroxide, aluminum hydroxide, calcium carbonate, and calcium hydroxide, were evaluated for their abuse-deterrent potential via in-vitro drug release and extraction studies.

Sublingual insulin administration: application of hydroxypropyl beta-cyclodextrin and poloxamer188 as permeation enhancers.

The objective of this investigation is to investigate the feasibility of sublingual insulin administration. Insulin solutions formulated with permeation enhancers (HPβCD/poloxamer 188) and their in-vitro and performances were evaluated. Thereafter, insulin fast-dissolving film was further developed to have similar properties, upon dissolving the film, of the optimized insulin solution.

Effect of ionization of drug on drug solubilization in SMEDDS prepared using Capmul MCM and caprylic acid.

The purpose of this study was to investigate the effect of ionization of drug on drug solubilization in SMEDDS (self-microemulsifying drug delivery system) prepared using Capmul MCM and caprylic acid. Solubilization capacity of blank SMEDDS dispersions for danazol, indomethacin and haloperidol as model drugs was determined. Based on the outcomes of solubilization capacity study, drug-loaded SMEDDS formulations were prepared and subjected to dispersion/precipitation study and droplet size analysis.

Transdermal iontophoretic delivery of tacrine hydrochloride: Correlation between in vitro permeation and in vivo performance in rats.

The aim of present investigation is to evaluate the feasibility of transdermal iontophoretic delivery of tacrine hydrochloride in Sprague Dawley (SD) rats using anodal iontophoretic patches and to correlate plasma tacrine concentration profiles to in vitro tacrine permeation flux. In vitro skin permeation studies were carried out across artificial membrane CELGRAD 2400, freshly excised SD rat abdominal skin, freshly excised hairless rat abdominal skin, and frozen pig skin to examine the role of permeation membranes. Furthermore, plasma profiles with an application of 0.

Application of design of experiments for formulation development and mechanistic evaluation of iontophoretic tacrine hydrochloride delivery.

Objective: The objective of this investigation is to develop mathematical equation to understand the impact of variables and establish statistical control over transdermal iontophoretic delivery of tacrine hydrochloride. In addition, possibility of using conductivity measurements as a tool of predicting ionic mobility of the participating ions for the application of iontophoretic delivery was explored.

Methods: Central composite design was applied to study effect of independent variables like current strength, buffer molarity, and drug concentration on iontophoretic tacrine permeation flux.

Formulation and rheological evaluation of ethosome-loaded carbopol hydrogel for transdermal application.

Objective: To select a suitable ethosome-loaded Carbopol hydrogel formulation, specifically tailored for transdermal application that exhibits (i) plastic flow with yield stress of approximately 50-80 Pa at low polymer concentration, (ii) relatively frequency independent elastic (G') and viscous (G″) properties and (iii) thermal stability.

Methods: Carbopol (C71, C934, C941, C971 or C974) hydrogels were prepared by dispersing Carbopol in distilled water followed neutralization by sodium hydroxide. The effects of Carbopol grade, Carbopol concentration, ethosome addition and temperature on flow (yield stress and viscosity) and viscoelastic (G' and G″) properties of Carbopol hydrogel were evaluated.

Solubility and dissolution enhancement strategies: current understanding and recent trends.

Identification of lead compounds with higher molecular weight and lower aqueous solubility has become increasingly prevalent with the advent of high throughput screening. Poor aqueous solubility of these lipophilic compounds can drastically affect the dissolution rate and subsequently the drug absorbed in the systemic circulation, imposing a significant burden of time and money during drug development process. Various pre-formulation and formulation strategies have been applied in the past that can improve the aqueous solubility of lipophilic compounds by manipulating either the crystal lattice properties or the activity coefficient of a solute in solution or both, if possible.

Elucidation of intestinal absorption mechanism of carvedilol-loaded solid lipid nanoparticles using Caco-2 cell line as an in-vitro model.

Enhanced oral bioavailability of poorly aqueous soluble drugs encapsulated in solid lipid nanoparticles (SLNs) via lymphatic delivery has been documented. Since no in-vitro lymphoid tissue is currently available, human excised Caco-2 cell monolayer could be alternative tissue for development of an in-vitro model to be used as a screening tool before animal studies are undertaken. Therefore, optimized carvedilol-loaded SLNs (FOPT-SLNs) were prepared, characterized, and evaluated using Caco-2 cell line as an in-vitro model.

Application of Capmul MCM and caprylic acid for the development of danazol-loaded SEDDS.

The feasibility of using Capmul MCM and caprylic acid (medium-chain triglyceride pre-digestion products) as the lipid phase was investigated for the development of self-emulsifying drug delivery system (SEDDS) as a carrier system to enhance solubilization of poorly water-soluble danazol. The composition of SEDDS was first evaluated by phase diagrams of lipid/surfactant/water systems. Thereafter, danazol-loaded SEDDS was formulated and subjected to dispersion/precipitation study in distilled water, HCl buffer, phosphate buffer, or biorelevant aqueous media.

Quality by design approach for formulation, evaluation and statistical optimization of diclofenac-loaded ethosomes via transdermal route.

The objective of this study was to fabricate and understand ethosomal formulations of diclofenac (DF) for enhanced anti-inflammatory activity using quality by design approach. DF-loaded ethosomal formulations were prepared using 4 × 5 full-factorial design with phosphatidylcholine:cholesterol (PC:CH) ratios ranging between 50:50 and 90:10, and ethanol concentration ranging between 0% and 30% as formulation variables. These formulations were characterized in terms of physicochemical properties and skin permeation kinetics.

Influence of electronic and formulation variables on transdermal iontophoresis of tacrine hydrochloride.

Freshly excised rat skin and side-by-side permeation cells were used to study the effect of electronic and formulation variables on transdermal iontophoretic delivery of tacrine. Current strength at 0.1-0.

Preparation, in vitro evaluation and statistical optimization of carvedilol-loaded solid lipid nanoparticles for lymphatic absorption via oral administration.

Carvedilol-loaded solid lipid nanoparticles (SLNs) were prepared using solubility parameter (δ) to select the lipid, and hot homogenization to fabricate SLNs. The effect of concentration of Compritol 888 ATO (COMP) and Poloxamer 188 (P-188) on the particle size of blank SLNs was studied using the design of experiments. Further narrow concentration range of COMP and P-188 was selected and carvedilol-loaded SLNs were prepared to obtain an optimized formulation which was lyophilized (L-SLNs), transformed into enteric compression-coated tablet and evaluated for drug release, X-ray diffraction and cellular uptake mechanism.

Transdermal delivery of diclofenac using water-in-oil microemulsion: formulation and mechanistic approach of drug skin permeation.

The objective of the present investigation was to enhance skin permeation of diclofenac using water-in-oil microemulsion and to elucidate its skin permeation mechanism. The w/o microemulsion formulations were selected based on constructed pseudoternary phase diagrams depending on water solubilization capacity and thermodynamic stability. These formulations were also subjected to physical characterization based on droplet size, viscosity, pH and conductivity.

Formulation and evaluation of time-controlled triple-concentric mefenamic acid tablets for rheumatoid arthritis.

A triple-concentric time-controlled release mefenamic acid (MA) tablet was developed using Carbopol and Ethocel polymers. The burst dose was programed to release immediately after an ingestion of tablet to be followed by a lag period of 2-4 h, and thereafter an 8 h controlled release of MA from core tablet. Core tablets were prepared using Carbopols 971P, 974P, 71G or 907 at various concentrations.

Statistical optimization of insulin-loaded Pluronic F-127 gels for buccal delivery of basal insulin.

The principle of statistical optimization was employed to fabricate insulin-loaded Pluronic F-127 (PF-127) gel formulations having the potential for buccal delivery of basal insulin. A two-level resolution III fractional factorial design was applied to simultaneously evaluate five independent formulation variables: PF-127 concentration, insulin concentration, sodium sulfate concentration, hydroxypropylmethyl cellulose (HPMC) concentration, and presence of sodium glycocholate. The amount of insulin released and permeated from gels as well as gelation time and mucoadhesion force of gels were measured and used as dependent response variables for formulation optimization.

Development and evaluation of controlled release ibuprofen matrix tablets by direct compression technique.

This investigation reports the development and evaluation of controlled release ibuprofen matrix tablets. Matrix tablets weighing 400 mg were fabricated by directly compressing ibuprofen (100 mg) with Eudragit RSPO and Avicel PH 101. The release of ibuprofen was dependant on concentration of Eudragit in the formulation.

Application of hydrogel polymers for development of thyrotropin releasing hormone-loaded adhesive buccal patches.

To utilize hydrogels for fabricating thyrotropin releasing hormone (TRH) adhesive buccal patches, type of hydrogels such as polyacrylic acids (Polycarbophil AA1, Carbopols 934P, 974P and 971P), celluloses (HPMC K4M, K4MCR and K15M), polysaccharide (sodium alginate) and polyacrylic acid combinations with either cellulose or polysaccharide were evaluated for adhesion force, water uptake and swelling capacity. Upon the characterization of hydrogel polymers, TRH-loading of patches fabricated from these hydrogels was evaluated at various polymer concentrations, combinations and ratios and then in vitro release kinetics of TRH from these patches were studied. Results indicated that maximum adhesion force was shown by polyacrylic acids.

Development and in vitro evaluation of insulin-loaded buccal Pluronic F-127 gels.

Insulin-loaded buccal Pluronic F-127 (PF-127) gel formulations were fabricated to study the effect of PF-127 concentration, insulin concentration, presence of salt, addition of polymer, and permeation enhancer on their gelation time, mucoadhesion force, release and permeation characteristics of insulin from the gels. Thereafter, the principle of statistical optimization to prepare a gel formulation having the potential for buccal delivery of basal insulin in diabetic patients was employed. The gelation time decreased as the concentration of PF-127 increased.

Transdermal iontophoresis of hydromorphone across hairless rat skin in vitro.

The feasibility of delivering hydromorphone by transdermal iontophoresis to obtain therapeutically effective analgesic concentrations for the management of cancer-related pain was evaluated. Anodal iontophoresis was performed, and the effect of current strength, current duration, solution pH, presence of buffer ions, and drug concentration on the transdermal permeation of hydromorphone was investigated in vitro. Freshly excised full-thickness hairless rat skin and side-by-side permeation cells connected to the Phoresor II with Ag/AgCl electrodes was used.

Transdermal iontophoresis: impact on skin integrity as evaluated by various methods.

Transdermal iontophoresis, a noninvasive technique that facilitates drug transport through the skin by the use of an external electrical field, has expanded the scope of drugs that can be delivered transdermally and enables programmable drug delivery. In general, transdermal iontophoresis is considered to be a safe procedure, associated with moderate erythema and tingling sensations. However, ensuring that the skin barrier maintains its integrity during iontophoresis is an essential factor to increase its clinical applicability.

Hydromorphone in the management of cancer-related pain: an update on routes of administration and dosage forms.

Pain is experienced by a majority of cancer patients. As life expectancy has increased in developed and developing countries, cancer-related pain has become a major health concern. Despite the use of the three-step analgesic ladder proposed by the World Health Organization, pain still remains under treated.

Development of pH- and time-dependent oral microparticles to optimize budesonide delivery to ileum and colon.

A microparticulate system consisting of non-enzymatically degrading poly(dl-lactide-co-glycolide) (PLGA) core and delivering budesonide site specifically to distal ileum and colon was developed. Budesonide-loaded microparticles were fabricated using solvent evaporation technique and formulation variables studied included different molecular weight grades of PLGA polymer as well as concentration of polymer, surfactant and drug. Eudragit S-100, an enteric polymer, was then used to form a coating on the surface of budesonide-loaded PLGA microparticles for site specific delivery to the distal ileum and colon.

Double-coated poly (butylcynanoacrylate) nanoparticulate delivery systems for brain targeting of dalargin via oral administration.

The aim of this study is to evaluate oral administration of poly (butylcyanoacrylate) nanoparticulate delivery systems (PBCA-NDSs), double-coated with Tween 80 and poly (ethylene) glycol (PEG) 20000 for brain delivery of hexapeptide dalargin, an anti-nociceptive peptide that does not cross blood-brain barrier (BBB) by itself. Studies have proven the brain uptake of Tween 80 overcoated nanoparticles after intravenous administration, but studies for brain delivery of nanoparticles after oral administration had been limited due to reduced bioavailability of nanoparticles and extensive degradation of the peptide and/or nanoparticles by gastrointestinal enzymes. To address this problem, dalargin-loaded PBCA-NDS were successively double-coated with Tween 80 and PEG 20000 in varied concentrations of up to 2% each.

Effect of surfactant on fabrication and characterization of paclitaxel-loaded polybutylcyanoacrylate nanoparticulate delivery systems.

The feasibility of applying biodegradable polybutylcyanoacrylate (PBCA) nanoparticulate delivery systems (NDSs) for the controlled release of paclitaxel was investigated. Paclitaxel-loaded and unloaded PBCA-NDSs containing various surfactants (dextran 70, cholesterol, polyvinyl alcohol and lecithin) were prepared by anionic polymerization. The effects of surfactant (1% w/v), surfactant combination (1% w/v each), and surfactant concentration (0.

Effect of HPMC and Carbopol on the release and floating properties of Gastric Floating Drug Delivery System using factorial design.

The purpose of this study is to investigate the effect of formulation variables on drug release and floating properties of the delivery system. Hydroxypropyl methylcellulose (HPMC) of different viscosity grades and Carbopol 934P (CP934) were used in formulating the Gastric Floating Drug Delivery System (GFDDS) employing 2 x 3 full factorial design. Main effects and interaction terms of the formulation variables could be evaluated quantitatively by a mathematical model.