Fabrication Protocol for Thermoplastic Microfluidic Devices: Nanoliter Volume Bioreactors for Cell Culturing.

Microfluidic devices consist of microchannels etched or embossed into substrates made of polymer, glass or silicon. Intricate connections of the microchannels to reactors with some smart mechanical structures such as traps or curvatures fulfil the desired functionalities such as mixing, separation, flow control or setting the environment for biochemical reactions. Here, we describe the fabrication methods of a thermoplastic microbioreactor step by step.

Magnetic Resonance Imaging-Compatible Optically Powered Miniature Wireless Modular Lorentz Force Actuators.

Minimally invasive medical procedures under magnetic resonance imaging (MRI) guidance have significant clinical promise. However, this potential has not been fully realized yet due to challenges regarding MRI compatibility and miniaturization of active and precise positioning systems inside MRI scanners, i.e.

Thermoplastic microfluidic bioreactors with integrated electrodes to study tumor treating fields on yeast cells.

Tumor-treating fields (TTFields) are alternating electrical fields of intermediate frequency and low intensity that can slow or inhibit tumor growth by disrupting mitosis division of cancerous cells through cell cycle proteins. In this work, for the first time, an in-house fabricated cyclo-olefin polymer made microfluidic bioreactors are integrated with Cr/Au interdigitated electrodes to test TTFields on yeast cells with fluorescent protein:Nop56 gene. A small gap between electrodes (50 m) allows small voltages (<150 mV) to be applied on the cells; hence, uninsulated gold electrodes are used in the non-faradaic region without causing any electrochemical reaction at the electrode-medium interface.

Cell trapping microfluidic chip made of Cyclo olefin polymer enabling two concurrent cell biology experiments with long term durability.

Cyclo Olefin Polymer (COP) based microbioreactors on a microfluidic chip were produced in house by hot-embossing and thermo-compression bonding methods. The chip allows two different experiments to be performed on trapped cells at the same time. On one side of the chip, red fluorescent protein (RFP) tagged nucleolar Nop56 protein was used to track changes in cell cycle as well as protein synthesis within the yeast cells under the application of the anti-tumor agent hydroxyurea (HU).

Real-Time Performance of a Tactile Neuroprosthesis on Awake Behaving Rats.

With the advancement of electrode and equipment technology, neuroprosthetics have become a promising alternative to partially compensate for the loss of sensorimotor function in amputees and patients with neurological diseases. Cortical neural interfaces are suitable especially for spinal cord injuries and amyotrophic lateral sclerosis. Although considerable success has been achieved in the literature by spike decoding of motor signals from the human brain, somatosensory feedback is essential for better motor control, interaction with objects, and the embodiment of prosthetic devices.

A low cost PS based microfluidic platform to investigate cell cycle towards developing a therapeutic strategy for cancer.

Inhibition of DNA damage response pathway in combination with DNA alkylating agents may enhance the selective killing of cancer cells leading to better therapeutic effects. MDM2 binding protein (MTBP) in human has a role in G1 phase (interphase of cell cycle) and its overexpression leads to breast and ovarian cancers. Sld7 is an uncharacterized protein in budding yeast and a potential functional homologue of MTBP.

Advances in microfluidic devices made from thermoplastics used in cell biology and analyses.

Silicon and glass were the main fabrication materials of microfluidic devices, however, plastics are on the rise in the past few years. Thermoplastic materials have recently been used to fabricate microfluidic platforms to perform experiments on cellular studies or environmental monitoring, with low cost disposable devices. This review describes the present state of the development and applications of microfluidic systems used in cell biology and analyses since the year 2000.

Modelling and Realization of a Water-Gated Field Effect Transistor (WG-FET) Using 16-nm-Thick Mono-Si Film.

We introduced a novel water-gated field effect transistor (WG-FET) which uses 16-nm-thick mono-Si film as active layer. WG-FET devices use electrical double layer (EDL) as gate insulator and operate under 1 V without causing any electrochemical reactions. Performance parameters based on voltage distribution on EDL are extracted and current-voltage relations are modelled.

Fabrication of cyclo olefin polymer microfluidic devices for trapping and culturing of yeast cells.

A microfluidic platform is designed and fabricated to investigate the role of uncharacterized YOR060C (Sld7) protein in aging in yeast cells for the first time. Saccharomyces cerevisiae yeast cells are trapped in the series of C-shaped regions (0.5 nL) of COP (cyclo olefin polymer), PMMA (poly methylmethacrylate), or PS (polystyrene) microbioreactors.

Thin film based semi-active resonant marker design for low profile interventional cardiovascular MRI devices.

Objectives: A new microfabrication method to produce low profile radio frequency (RF) resonant markers on catheter shafts was developed. A semi-active RF resonant marker incorporating a solenoid and a plate capacitor was constructed on the distal shaft of a 5 Fr guiding catheter. The resulting device can be used for interventional cardiovascular MRI procedures.

Using a low-amplitude RF pulse at echo time (LARFET) for device localization in MRI.

We describe a new method for frequency down-conversion of MR signals acquired with the radio-frequency projections method for device localization. A low-amplitude, off-center RF pulse applied simultaneously with the echo signal is utilized as the reference for frequency down-conversion. Because of the low-amplitude and large offset from the Larmor frequency, the RF pulse minimally interfered with magnetic resonance of protons.

A solution state diode using semiconductor polymer nanorods with nanogap electrodes.

A solution state polymer diode, which uses regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT):dichlorobenzene solution as the semiconductor between highly doped p-type silicon and aluminum electrodes has been built. Electrodes separated by a 40 nm gap enable intra-chain charge carrier transfer through the lengths of single polymer chains. This prevents chain to chain hopping and chain entanglements, increasing carrier mobility.

Monolithic valves for microfluidic chips based on thermoresponsive polymer gels.

The direct preparation of thermoresponsive monolithic copolymers by photopatterning of a liquid phase consisting of an aqueous solution of N-isopropylacrylamide, N-ethylacrylamide, N,N'-methylenebisacrylamide, and 4,4'-azobis(4-cyanovaleric acid) has been studied and the products used as valves within the channels of microfluidic devices. The volume change associated with the polymer phase transition at its lower critical solution temperature (LCST) leads to the rapid swelling and the deswelling of the 2.5% cross-linked monolithic gel thus enabling the polymer to close or open the channel and to function as a nonmechanically actuated valve.

Flow control valves for analytical microfluidic chips without mechanical parts based on thermally responsive monolithic polymers.

Monolithic plugs of poly(N-isopropylacrylamide) cross-linked with 5% methylenebisacrylamide have been prepared by photoinitiated polymerization within the channel of a microfluidic device. The volume change associated with the polymer phase transition at its lower critical solution temperature of 32 degrees C allows both the rapid swelling and the deswelling of the monoliths enabling the polymer to close or open the channel as it functions as a nonmechanical valve. Thermoelectric elements capable of changing the temperature of the system between 17 and 57 degrees C were used to actuate the valve.