Color-controlled nonstoichiometric spinel-type cobalt gallate nanopigments prepared by supercritical hydrothermal synthesis.

Spinel-type inorganic pigments with intensive color and chemical/thermal stability are showing extensive applications that could be further broadened by color manipulation and improvement of the material properties through nanosizing. In this study, we report the supercritical hydrothermal synthesis of nonstoichiometric spinel-type cobalt gallate nanoparticles (Co-Ga NPs) with controlled color. Without the conventional calcination procedure, NPs with greenish-blue, blue, and yellowish-green colors were synthesized from precursor solutions at pH 7, 9, and 11, respectively, with a low Co/Ga molar ratio of 0.

Facet-Controlled Synthesis of CeO Nanoparticles for High-Performance CeO Nanoparticle/SnO Nanosheet Hybrid Gas Sensors.

CeO nanocubes with metastable {100} facets and CeO nanooctahedrons with the most stable {111} facets are herein fabricated by controlling the morphology and facets of CeO nanoparticles. SnO nanosheet-based assembled films coated with these CeO nanocubes or CeO nanooctahedrons yield {100} CeO nanocubes/SnO nanosheets and {111} CeO nanooctahedron/SnO nanosheet hybrid gas sensors, respectively. The hybrid sensors with CeO nanoparticles exhibited enhanced sensing responses to numerous chemical species relative to a pristine SnO nanosheet gas sensor, including acetone, hydrogen, ethanol, ammonia, acetaldehyde, and allyl mercaptan.

Curcumin-Loaded Liposome Preparation in Ultrasound Environment under Pressurized Carbon Dioxide.

Curcumin-loaded liposomes were prepared using a supercritical carbon dioxide (SCCO2)−ultrasound environment system. The experiments were performed at temperatures of 40−70 °C and pressures of 10−25 MPa in a batch system with ultrasonication for 60 min. Transmission electron microscopy (TEM) images revealed liposome products with spherical morphologies and diameters of <100 nm.

Radiosensitization Effect of Gold Nanoparticles on Plasmid DNA Damage Induced by Therapeutic MV X-rays.

Gold nanoparticles (AuNPs) can be used with megavolt (MV) X-rays to exert radiosensitization effects, as demonstrated in cell survival assays and mouse experiments. However, the detailed mechanisms are not clear; besides physical dose enhancement, several chemical and biological processes have been proposed. Reducing the AuNP concentration while achieving sufficient enhancement is necessary for the clinical application of AuNPs.

Direct Observation Techniques Using Scanning Electron Microscope for Hydrothermally Synthesized Nanocrystals and Nanoclusters.

Metal oxide nanocrystals have garnered significant attention owing to their unique properties, including luminescence, ferroelectricity, and catalytic activity. Among the various synthetic methods, hydrothermal synthesis is a promising method for synthesizing metal oxide nanocrystals and nanoclusters. Because the shape and surface structure of the nanocrystals largely affect their properties, their analytical methods should be developed.

Direct Imaging for Single Molecular Chain of Surfactant on CeO Nanocrystals.

Organic surfactant controls the synthesis of nanocrystals (NCs) with uniform size and morphology by attaching on the surface of NCs and further facilitates their assembly into ordered superstructure, which produces versatile functional nanomaterials for practical applications. It is essential to directly resolve the surfactant molecules on the surface of NCs to improve the understanding of surface chemistry of NCs. However, the imaging resolution and contrast are insufficient for a single molecule of organic surfactant on NCs.

Titanium peroxide nanoparticles enhanced cytotoxic effects of X-ray irradiation against pancreatic cancer model through reactive oxygen species generation in vitro and in vivo.

Background: Biological applications of nanoparticles are rapidly increasing, which introduces new possibilities to improve the efficacy of radiotherapy. Here, we synthesized titanium peroxide nanoparticles (TiOxNPs) and investigated their efficacy as novel agents that can potently enhance the effects of radiation in the treatment of pancreatic cancer.

Methods: TiOxNPs and polyacrylic acid-modified TiOxNPs (PAA-TiOxNPs) were synthesized from anatase-type titanium dioxide nanoparticles (TiO2NPs).

Green solvent for green materials: a supercritical hydrothermal method and shape-controlled synthesis of Cr-doped CeO2 nanoparticles.

This paper describes a supercritical hydrothermal synthesis method as a green solvent process, along with products based on this method that can be used as green materials that contribute to solving environmental problems. The first part of this paper summarizes the basics of this method, including the mechanism of the reactions, specific features of the supercritical state for nanoparticle synthesis, the continuous flow-type reactor and applications; this provides a better understanding of the suitability of this method to synthesize green materials. The second part of the paper describes the method used to synthesize Cr-doped CeO(2) nanoparticles, which show an extremely high oxygen storage capacity, suggesting their high potential as an environmental catalyst.

Hydrothermal synthesis of inorganic-organic hybrid gadolinium hydroxide nanoclusters with controlled size and morphology.

A series of gadolinium hydroxide [Gd(OH)3] nanoclusters having different morphologies was synthesized in the presence of 3,4-dihydroxy hydrocinnamic acid (DHCA), an organic modifier, under subcritical water conditions. These well-shaped Gd(OH)3 clusters are composed of many nanorods in a parallel orientation, rather than a disordered aggregation of nanorods, which are linked together by organic DHCA molecules. Here DHCA works as an inter-linker to form these cluster-like structures through coordination bonds.

Stress inversion from initial tensile to compressive side during ultrathin oxide growth of the Si(100) surface.

We report the real-time observation of the stress change during sub-nanometer oxide growth on the Si(100) surface. Oxidation initially induced a rapid buildup of tensile stress up to -1.9 × 10(8) N m(-2) with an oxide thickness of 0.

Supercritical hydrothermal synthesis and in situ organic modification of indium tin oxide nanoparticles using continuous-flow reaction system.

ITO nanoparticles were synthesized hydrothermally and surface modified in supercritical water using a continuous flow reaction system. The organic modification of the nanoparticles converted the surface from hydrophilic to hydrophobic, making the modified nanoparticles easily dispersible in organic solvent. The addition of a surface modifier into the reaction system impacted the crystal growth and particle size as well as dispersion.

Surfactant-assisted one-pot synthesis of superparamagnetic magnetite nanoparticle clusters with tunable cluster size and magnetic field sensitivity.

Magnetic nanoparticles (MNPs) have many potential biomedical applications. Improvements in their magnetic properties and solubility are necessary for these applications to realize their full potential. In this study, MNPs in the form of raspberry-like magnetite (Fe(3)O(4)) nanoparticle clusters, consisting of tiny Fe(3)O(4) particles with a diameter of approximately 20 nm, were prepared under hydrothermal conditions at 200 °C in the presence of 3,4-dihydroxyhydroxysinnamic acid (DHCA).

Material-binding peptide application--ZnO crystal structure control by means of a ZnO-binding peptide.

Recently, a zinc oxide (ZnO)-binding peptide (ZnOBP) has been identified and has been used to assist the synthesis of unique crystalline ZnO particles. We analyzed the influence of ZnOBP on the crystal growth of ZnO structures formed from zinc hydroxide. The addition of ZnOBP in the hydrothermal synthesis of ZnO suppressed [0001] crystal growth in the ZnO particles, indicating that the specificity of the material-binding peptide for specific inorganic crystal faces controlled the crystal growth.

Continuous hydrothermal synthesis of nickel oxide nanoplates and their use as nanoinks for p-type channel material in a bottom-gate field-effect transistor.

Nickel oxide nanoplates were continuously synthesized by hydrothermal reaction using a flow-type reactor. The products had a thickness of approximately 10 nm and a lateral size of 100-500 nm. The nanoplates were purified and drop-cast on a bottom-gate substrate and used as the channel material in a field-effect transistor after annealing at 300 degrees C.

Direct and selective immobilization of proteins by means of an inorganic material-binding peptide: discussion on functionalization in the elongation to material-binding peptide.

Using an artificial peptide library, we have identified a peptide with affinity for ZnO materials that could be used to selectively accumulate ZnO particles on polypropylene-gold plates. In this study, we fused recombinant green fluorescent protein (GFP) with this ZnO-binding peptide (ZnOBP) and then selectively immobilized the fused protein on ZnO particles. We determined an appropriate condition for selective immobilization of recombinant GFP, and the ZnO-binding function of ZnOBP-fused GFP was examined by elongating the ZnOBP tag from a single amino acid to the intact sequence.

Continuous synthesis of organic-inorganic hybridized cubic nanoassemblies of octahedral cerium oxide nanocrystals and hexanedioic acid.

We synthesized cubic nanoassemblies of octahedral CeO(2) nanocrystals by simply heating an aqueous solution of cerium nitrate (Ce(NO(3))(3)) in the presence of hexanedioic acid (HOOC(CH(2))(4)COOH) in a lab-scale plug-flow reactor. It was concluded that the octahedral shape of the primary CeO(2) nanocrystals plausibly leads to octa-coordination of the primary nanocrystals, thus enabling controlled assembly to form a cubic structure.

Disassembly of lignin and chemical recovery in supercritical water and p-cresol mixture. Studies on lignin model compounds.

The aim of the study was to gain insight into the role of the each unit of lignin in the formation of products. Glycerol, guaiacol, the mixture of glycerol and guaiacol (Gly&Gua), and guaiacylglycerol-beta-guaiacyl ether (GGGE) were used as lignin model compounds to study fragmentation of lignin in an excess of water and p-cresol at 400 degrees C. The products have been analyzed employing gas chromatography (GC)-mass spectrometer (MS) and gas chromatography-frame ionization detector for qualitative and quantitative analysis.