Background-suppressed SRS fingerprint imaging with a fully integrated system using a single optical parametric oscillator.

Stimulated Raman Scattering (SRS) imaging can be hampered by non-resonant parasitic signals that lead to imaging artifacts and eventually overwhelm the Raman signal of interest. Stimulated Raman gain opposite loss detection (SRGOLD) is a three-beam excitation scheme capable of suppressing this nonlinear background while enhancing the resonant Raman signal. We present here a compact electro-optical system for SRGOLD excitation which conveniently exploits the idler beam generated by an optical parametric oscillator (OPO).

Intravascular optical coherence tomography to validate finite-element simulation of angioplasty balloon inflation.

Concrete methods are lacking to examine angioplasty simulation results. For the first time, we explored the application of intravascular optical coherence tomography (IVOCT) to experimentally validate results obtained from finite-element simulation of angioplasty balloon deployment. In order to simulate each experimental scenario, IVOCT images were used to create initial geometrical models for the balloon and the phantoms.

Assessment of Compressive Raman versus Hyperspectral Raman for Microcalcification Chemical Imaging.

We experimentally implement a compressive Raman technology (CRT) that incorporates chemometric analysis directly into the spectrometer hardware by means of a digital micromirror device (DMD). The DMD is a programmable optical filter on which optimized binary filters are displayed. The latter are generated with an algorithm based on the Cramer-Rao lower bound.

Diazonium Salt-Based Surface-Enhanced Raman Spectroscopy Nanosensor: Detection and Quantitation of Aromatic Hydrocarbons in Water Samples.

Here, we present a surface-enhanced Raman spectroscopy (SERS) nanosensor for environmental pollutants detection. This study was conducted on three polycyclic aromatic hydrocarbons (PAHs): benzo[a]pyrene (BaP), fluoranthene (FL), and naphthalene (NAP). SERS substrates were chemically functionalized using 4-dodecyl benzenediazonium-tetrafluoroborate and SERS analyses were conducted to detect the pollutants alone and in mixtures.

Demonstration of a frequency spectral compression effect through an up-conversion interferometer.

This paper reports on the experimental implementation of an interferometer featuring sum frequency generation (SFG) processes powered by a pump spectral doublet. The aim of this configuration is to allow the use of the SFG process over an enlarged spectral domain. By analyzing the converted signal, we experimentally demonstrate a frequency spectral compression effect from the infrared input signal to the visible one converted through the SFG process.

Intravascular optical coherence tomography to characterize tissue deformation during angioplasty: preliminary experiments with artery phantoms.

We explored the potential of intravascular optical coherence tomography (IVOCT) to assess deformation during angioplasty balloon inflation. Using a semi-compliant balloon and artery phantoms, we considered two experimental scenarios. The goal for the first scenario was to investigate if variation in the elasticity of the structure surrounding the balloon could be sensed by IVOCT monitoring.

Optimal signal processing of nonlinearity in swept-source and spectral-domain optical coherence tomography.

We demonstrate the efficiency of the convolution using an optimized Kaiser-Bessel window to resample nonlinear data in wavenumber for Fourier-domain optical coherence tomography (OCT). We extend our previous experimental demonstration that was performed with a specific swept-source nonlinearity. The method is now applied to swept-source OCT data obtained for various simulated swept-source nonlinearities as well as spectral-domain OCT data obtained from both simulations and experiments.

Real-time control of angioplasty balloon inflation based on feedback from intravascular optical coherence tomography: experimental validation on an excised heart and a beating heart model.

We report on real-time control of balloon inflation inside porcine arteries. In the first step, experiments were done in a coronary artery of an excised heart. In the second step, experiments were done in a beating heart setup providing conditions very close to in vivo conditions without the complications.

Real-time control of angioplasty balloon inflation based on feedback from intravascular optical coherence tomography: preliminary study on an artery phantom.

A method is proposed to achieve computerized control of angioplasty balloon inflation, based on feedback from intravascular optical coherence tomography (IVOCT). Controlled balloon inflation could benefit clinical applications, cardiovascular research, and medical device industry. The proposed method was experimentally tested for balloon inflation within an artery phantom.

Optical coherence tomography monitoring of angioplasty balloon inflation in a deployment tester.

We present an innovative integration of an intravascular optical coherence tomography probe into a computerized balloon deployment system to monitor the balloon inflation process. The high-resolution intraluminal imaging of the balloon provides a detailed assessment of the balloon quality and, consequently, a technique to improve the balloon manufacturing process. A custom-built swept-source optical coherence tomography system is used for real-time imaging.

Intravascular optical coherence tomography on a beating heart model.

The advantages and limitations of using a beating heart model in the development of intravascular optical coherence tomography are discussed. The model fills the gap between bench experiments, performed on phantoms and excised arteries, and whole animal in-vivo preparations. The beating heart model is stable for many hours, allowing for extended measurement times and multiple imaging sessions under in-vivo conditions without the complications of maintaining whole-animal preparation.

Experimental validation of an optimized signal processing method to handle non-linearity in swept-source optical coherence tomography.

We evaluate various signal processing methods to handle the non-linearity in wavenumber space exhibited by most laser sources for swept-source optical coherence tomography. The following methods are compared for the same set of experimental data: non-uniform discrete Fourier transforms with Vandermonde matrix or with Lomb periodogram, resampling with linear interpolation or spline interpolation prior to fast-Fourier transform (FFT), and resampling with convolution prior to FFT. By selecting an optimized Kaiser-Bessel window to perform the convolution, we show that convolution followed by FFT is the most efficient method.

Artifact removal in Fourier-domain optical coherence tomography with a piezoelectric fiber stretcher.

We describe an artifact removal setup swept-source optical coherence tomography (OCT) system that enables high-speed full-range imaging. We implement a piezoelectric fiber stretcher to generate a periodic phase shift between successive A-scans, thus introducing a transverse modulation. The depth ambiguity is then resolved by performing a Fourier filtering in the transverse direction before processing the data in the axial direction.

Three-beam photonic crystal fiber imaging interferometer.

Some varieties of photonic crystal fiber (PCF) have huge potential for high-resolution imaging in astronomy. They allow us to operate in a single-mode regime over a wide bandwidth keeping a high transmission level. Thus they may be used to carry wide spectral light over hundreds of meters.

Characterization of fluoride fibers for the Optical Hawaiian Array for Nanoradian Astronomy project.

We report on the interferometric characterization of a pair of 300 m long single-mode non-polarization-maintaining fibers designed for the Optical Hawaiian Array for Nanoradian Astronomy ('OHANA) project whose goal is to realize a kilometric near-infrared astronomical array by connecting the large telescopes of the Mauna Kea observatory with single-mode fibers. The fluoride glass fibers are operated in the astronomical K band (2.0-2.

Test of photonic crystal fiber in broadband interferometry.

Photonic crystal fibers (PCFs) are microstructured waveguides that are used in metrology, nonlinear optics, and coherent tomography. PCF studies are focused mainly on the improvement of dispersion properties and wide spectral single-mode operating domains. Consequently, in the astronomical context this kind of fiber is a good candidate for use in the design of a fiber-linked version of a stellar interferometer for aperture synthesis.