Plaque heterogeneity influences in-stent restenosis following drug-eluting stent implantation: Insights from patient-specific multiscale modelling.

In-stent restenosis represents a major cause of failure of percutaneous coronary intervention with drug-eluting stent implantation. Computational multiscale models have recently emerged as powerful tools for investigating the mechanobiological mechanisms underlying vascular adaptation processes during in-stent restenosis. However, to date, the interplay between intervention-induced inflammation, drug delivery and drug retention has been under-investigated.

Laplace Transform Based Modeling of Drug Delivery with Reversible Drug Binding in a Multilayer Tissue.

Objective: Drug delivery from a drug-loaded device into an adjacent tissue is a complicated process involving drug transport through diffusion and advection, coupled with drug binding kinetics responsible for drug uptake in the tissue. This work presents a theoretical model to predict drug delivery from a device into a multilayer tissue, assuming linear reversible drug binding in the tissue layers.

Methods: The governing mass conservation equations based on diffusion, advection and drug binding in a multilayer cylindrical geometry are written, and solved using Laplace transformation.

Performance of drug-coated balloons in coronary and below-the-knee arteries: Anatomical, physiological and pathological considerations.

Below-the-knee (infrapopliteal) atherosclerotic disease, which presents as chronic limb-threatening ischemia (CLTI) in nearly 50% of patients, represents a treatment challenge when it comes to the endovascular intervention arm of management. Due to reduced tissue perfusion, patients usually experience pain at rest and atrophic changes correlated to the extent of the compromised perfusion. Unfortunately, the prognosis remains unsatisfactory with 30% of patients requiring major amputation and a mortality rate of 25% within 1 year.

Investigating the effect of drug release on in-stent restenosis: A hybrid continuum - agent-based modelling approach.

Background And Objective: In-stent restenosis (ISR) following percutaneous coronary intervention with drug-eluting stent (DES) implantation remains an unresolved issue, with ISR rates up to 10%. The use of antiproliferative drugs on DESs has significantly reduced ISR. However, a complete knowledge of the mechanobiological processes underlying ISR is still lacking.

Modelling smart drug release with functionally graded materials.

Functionally graded materials (FGMs), possessing properties that vary smoothly from one region to another, have been receiving increasing attention in recent years, particularly in the aerospace, automotive and biomedical sectors. However, they have yet to reach their full potential. In this paper, we explore the potential of FGMs in the context of drug delivery, where the unique material characteristics offer the potential of fine-tuning drug-release for the desired application.

Controlling release from encapsulated drug-loaded devices: insights from modeling the dissolution front propagation.

Dissolution of drug from its solid form to a dissolved form is an important consideration in the design and optimization of drug delivery devices, particularly owing to the abundance of emerging compounds that are extremely poorly soluble. When the solid dosage form is encapsulated, for example by the porous walls of an implant, the impact of the encapsulant drug transport properties is a further confounding issue. In such a case, dissolution and diffusion work in tandem to control the release of drug.

Genomic structural variation: A complex but important driver of human evolution.

Structural variants (SVs)-including duplications, deletions, and inversions of DNA-can have significant genomic and functional impacts but are technically difficult to identify and assay compared with single-nucleotide variants. With the aid of new genomic technologies, it has become clear that SVs account for significant differences across and within species. This phenomenon is particularly well-documented for humans and other primates due to the wealth of sequence data available.

Modeling Dual Drug Delivery from Eluting Stents: The Influence of Non-Linear Binding Competition and Non-Uniform Drug Loading.

Objective: There is increasing interest in simultaneous endovascular delivery of more than one drug from a drug-loaded stent into a diseased artery. There may be an opportunity to obtain a therapeutically desirable uptake profile of the two drugs over time by appropriate design of the initial drug distribution in the stent. Due to the non-linear, coupled nature of diffusion and reversible specific/non-specific binding of both drugs as well as competition between the drugs for a fixed binding site density, a comprehensive numerical investigation of this problem is critically needed.

Solute transport with Michaelis-Menten kinetics for in vitro cell culture.

A traditional method of in vitro cell culture involves a monolayer of cells at the base of a petri dish filled with culture medium. While the primary role of the culture medium is to supply nutrients to the cells, drug or other solutes may be added, depending on the purpose of the experiment. Metabolism by cells of oxygen, nutrients and drug is typically governed by Michaelis-Menten (M-M) kinetics.

Optimization of Initial Drug Distribution in Spherical Capsules for Personalized Release.

Objective: Customization of the rate of drug delivered based on individual patient requirements is of paramount importance in the design of drug delivery devices. Advances in manufacturing may enable multilayer drug delivery devices with different initial drug distributions in each layer. However, a robust mathematical understanding of how to optimize such capabilities is critically needed.

An intricate interplay between stent drug dose and release rate dictates arterial restenosis.

Since the introduction of percutaneous coronary intervention (PCI) for the treatment of obstructive coronary artery disease (CAD), patient outcomes have progressively improved. Drug eluting stents (DES) that employ anti-proliferative drugs to limit excess tissue growth following stent deployment have proved revolutionary. However, restenosis and a need for repeat revascularisation still occurs after DES use.

Mathematical modelling of endovascular drug delivery: Balloons versus stents.

The most common treatment for obstructive coronary artery disease (CAD) is the implantation of a permanent drug-eluting stent (DES). Not only has this permanency been associated with delayed healing of the artery, but it also poses challenges when treating subsequent re-narrowing due to in-stent restenosis (ISR). Drug-coated balloons (DCBs) provide a potential solution to each of these issues.

How Does Fluid Flow Influence Drug Release from Drug Filled Implants?

Drug-filled implants (DFIs) have emerged as an innovative approach to control the delivery of drugs. These devices contain the drug within the structure of the implant itself and avoid the need to include additional drug carrier materials such as a polymers, which are often associated with inflammation and delayed healing/tissue regeneration at the implant site. One common feature of in vitro experiments to generate drug release profiles is stirring or agitation of the release medium.

Drug diffusion and release from a bioerodible spherical capsule.

Controlled release of a drug contained in a spherical polymer capsule is of significant interest in many fields of medicine. There is growing interest in tailoring the erosion properties of the drug to help control and optimize the drug release process. Theoretical understanding of the nature of drug release from a bioerodible capsule is, therefore, important for designing effective drug delivery systems.

3D modelling of drug-coated balloons for the treatment of calcified superficial femoral arteries.

Background/objectives: Drug-coated balloon therapy for diseased superficial femoral arteries remains controversial. Despite its clinical relevance, only a few computational studies based on simplistic two-dimensional models have been proposed to investigate this endovascular therapy to date. This work addresses the aforementioned limitation by analyzing the drug transport and kinetics occurring during drug-coated balloon deployment in a three-dimensional geometry.

Do we really understand how drug eluted from stents modulates arterial healing?

The advent of drug-eluting stents (DES) has revolutionised the treatment of coronary artery disease. These devices, coated with anti-proliferative drugs, are deployed into stenosed or occluded vessels, compressing the plaque to restore natural blood flow, whilst simultaneously combating the evolution of restenotic tissue. Since the development of the first stent, extensive research has investigated how further advancements in stent technology can improve patient outcome.

Influence of vessel curvature and plaque composition on drug transport in the arterial wall following drug-eluting stent implantation.

In the last decade, many computational models have been developed to describe the transport of drug eluted from stents and the subsequent uptake into arterial tissue. Each of these models has its own set of limitations: for example, models typically employ simplified stent and arterial geometries, some models assume a homogeneous arterial wall, and others neglect the influence of blood flow and plasma filtration on the drug transport process. In this study, we focus on two common limitations.

Unexpected Role of Nonimmune Cells: Amateur Phagocytes.

Effective and efficient efferocytosis of dead cells and associated cellular debris are critical to tissue homeostasis and healing of injured tissues. This important task was previously thought to be restricted to professional phagocytes (PPs). However, accumulating evidence has revealed another type of phagocyte, the amateur phagocyte (AP), which can also participate in efferocytosis.

Macrophage membrane functionalized biomimetic nanoparticles for targeted anti-atherosclerosis applications.

Atherosclerosis (AS), the underlying cause of most cardiovascular events, is one of the most common causes of human morbidity and mortality worldwide due to the lack of an efficient strategy for targeted therapy. In this work, we aimed to develop an ideal biomimetic nanoparticle for targeted AS therapy. Based on macrophage "homing" into atherosclerotic lesions and cell membrane coating nanotechnology, biomimetic nanoparticles (MM/RAPNPs) were fabricated with a macrophage membrane (MM) coating on the surface of rapamycin-loaded poly (lactic-co-glycolic acid) copolymer (PLGA) nanoparticles (RAPNPs).

Mathematical modelling of fluid flow and solute transport to define operating parameters for perfusion cell culture systems.

In recent years, there has been a move away from the use of static two-dimensional cell culture models for testing the chemical safety and efficacy of drugs. Such models are increasingly being replaced by more physiologically relevant cell culture systems featuring dynamic flow and/or three-dimensional structures of cells. While it is acknowledged that such systems provide a more realistic environment within which to test drugs, progress is being hindered by a lack of understanding of the physical and chemical environment that the cells are exposed to.

How does stent expansion alter drug transport properties of the arterial wall?

Stents have become the most successful device to treat advanced atherosclerotic lesions. However, one of the main issues with these interventions is the development of restenosis. The coating of stents with antiproliferative substances to reduce this effect is now standard, although such drugs can also delay re-endothelialization of the intima.

Penetration of the blood-brain barrier and the anti-tumour effect of a novel PLGA-lysoGM1/DOX micelle drug delivery system.

Effective treatment of glioma and other central nervous system (CNS) diseases is hindered by the presence of the blood-brain barrier (BBB). A novel nano-delivery vehicle system composed of PLGA-lysoGM1/DOX micelles was developed to cross the BBB for CNS treatment. We have shown that doxorubicin (DOX) as a model drug encapsulated in PLGA-lysoGM1 micelles can achieve up to 3.

Covalent immobilization of biomolecules on stent materials through mussel adhesive protein coating to form biofunctional films.

It is widely accepted that surface biofunctional modification may be an effective approach to improve biocompatibility and confer new bioactive properties on biomaterials. In this work, mussel adhesive protein (MAP) was applied as a coating on 316 L stainless steel substrates (316 L SS) and stents, and then either immobilized VEGF or CD34 antibody were added to create biofunctional films. The properties of the MAP coating were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and a water contact angle test.

Mathematical modelling of the restenosis process after stent implantation.

The stenting procedure has evolved to become a highly successful technique for the clinical treatment of advanced atherosclerotic lesions in arteries. However, the development of in-stent restenosis remains a key problem. In this work, a novel two-dimensional continuum mathematical model is proposed to describe the complex restenosis process following the insertion of a stent into a coronary artery.

Biomimetic Nanotherapies: Red Blood Cell Based Core-Shell Structured Nanocomplexes for Atherosclerosis Management.

Cardiovascular disease is the leading cause of mortality worldwide. Atherosclerosis, one of the most common forms of the disease, is characterized by a gradual formation of atherosclerotic plaque, hardening, and narrowing of the arteries. Nanomaterials can serve as powerful delivery platforms for atherosclerosis treatment.