Scalable CIGS Solar Cells Employing a New Device Design of Nontoxic Buffer Layer and Microgrid Electrode.

The efficiency of copper indium gallium selenide (CIGS) solar cells that use transparent conductive oxide (TCO) as the top electrode decreases significantly as the device area increases owing to the poor electrical properties of TCO. Therefore, high-efficiency, large-area CIGS solar cells require the development of a novel top electrode with high transmittance and conductivity. In this study, a microgrid/TCO hybrid electrode is designed to minimize the optical and resistive losses that may occur in the top electrode of a CIGS solar cell.

A machine learning-based approach for predicting renal function recovery in general ward patients with acute kidney injury.

Background: Acute kidney injury (AKI) is a significant challenge in healthcare. While there are considerable researches dedicated to AKI patients, a crucial factor in their renal function recovery, is often overlooked. Thus, our study aims to address this issue through the development of a machine learning model to predict restoration of kidney function in patients with AKI.

Effects of the Electrical Properties of SnO and C60 on the Carrier Transport Characteristics of p-i-n-Structured Semitransparent Perovskite Solar Cells.

Recently, metal halide perovskite-based top cells have shown significant potential for use in inexpensive and high-performance tandem solar cells. In state-of-the-art p-i-n perovskite/Si tandem devices, atomic-layer-deposited SnO has been widely used as a buffer layer in the top cells because it enables conformal, pinhole-free, and highly transparent buffer layer formation. In this work, the effects of various electrical properties of SnO and C60 layers on the carrier transport characteristics and the performance of the final devices were investigated using a numerical simulation method, which was established based on real experimental data to increase the validity of the model.

Optical Characterization and Prediction with Neural Network Modeling of Various Stoichiometries of Perovskite Materials Using a Hyperregression Method.

Quaternary perovskite solar cells are being extensively studied, with the goal of increasing solar cell efficiency and securing stability by changing the ratios of methylammonium, formamidinium, I, and Br. However, when the stoichiometric ratio is changed, the photoelectric properties reflect those of different materials, making it difficult to study the physical properties of the quaternary perovskite. In this study, the optical properties of perovskite materials with various stoichiometric ratios were measured using ellipsometry, and the results were analyzed using an optical simulation model.

Two-stage binary classifier for neuromuscular disorders using surface electromyography feature extraction and selection.

If surface electromyography (sEMG) can be used to determine neuromuscular disorders, it can diagnose conditions more easily than needle electromyography. In this study, sEMG during maximum voluntary isometric contraction and repetitive exercise was measured, and normal, myopathy, and neuropathy were classified with high accuracy using these signals. First, a two-stage binary classifier model was constructed to classify the patient group and the normal group and categorize the cases assigned to the patient group into myopathy and neuropathy groups.

Microwave-assisted ultrafast in-situ growth of N-doped carbon quantum dots on multiwalled carbon nanotubes as an efficient electrocatalyst for photovoltaics.

Multiwalled carbon nanotubes (MWCNTs) are at the forefront of metal-free electrocatalysts, however, the performance is still limited due to lack of functionality and dispersion. Coupling of MWCNTs with nitrogen doped carbon quantum dots (NCQDs) can impart the required active sites and dispersion. For the purpose, NCQDs are generally attached to MWCNTs by multistep processing, such as NCQDs synthesis, followed by their complex purification, surface activation, and crosslinking with MWCNT.

Solution-Processed ZnCdS Buffer Layers for Vapor Transport-Deposited SnS Thin-Film Solar Cells: Achieving High Open-Circuit Voltage.

As an alternative buffer material to CdS, ZnCdS buffer layers for vapor transport-deposited SnS thin-film solar cells (TFSCs) were fabricated using the successive ionic layer adsorption and reaction (SILAR) method. Varying the Zn-to-Cd ratio resulted in a series of ZnCdS thin films with controllable band gaps in the range of 2.40-3.

Na-Mediated Stoichiometry Control of FeS Thin Films: Suppression of Nanoscale S-Deficiency and Improvement of Photoresponse.

Control of the constituent phase and stoichiometry of iron pyrite (FeS) is a prerequisite for high-performance photovoltaic devices based on this material. If the pyrite contains sulfur-deficiency-related secondary phases which have a metallic character and a high possibility of coexistence in pyrite films, then significant carrier recombination is expected. In this work, the beneficial role of Na in suppressing the formation of nanoscale or amorphous sulfur-deficient secondary phases is reported with experimental evidence, leading to a higher phase purity for solution-processed pyrite films.

Performance and Uniformity Improvement in Ultrathin Cu(In,Ga)Se Solar Cells with a WO Nanointerlayer at the Absorber/Transparent Back-Contact Interface.

Thinning CIGSe absorber layer to less than 500 nm is desirable for reducing the cost per unit watt of photovoltaic-generated electricity, and also, the semitransparent solar cell based on such a thin absorber can be used in bifacial and superstrate configurations if the back electrode is transparent. In this study, a WO layer is inserted between Cu(In,Ga)Se (CIGSe) absorber and tin-doped indium oxide back-contact to enhance the hole collection at the back electrode. A WO interlayer with a thickness of 6 nm is found to be optimum because it causes a ∼38% relative increase in the fill factor of a ∼450 nm thick CIGSe-based device compared to the reference device without a WO interlayer.

The monoclonal antibody for discrimination of natural honey against artificial honey.

Background: Honey is a natural product used as food, medicine, or cosmetics for very long time and is made by bees. Honey contains various components such as sugar, protein, minerals, and vitamins. Honey is made by or , which commonly has major royal jelly proteins (MRJPs) as a major protein.

Increased miR-223 expression in foetal organs is a signature of acute chorioamnionitis with systemic consequences.

Acute chorioamnionitis, frequently observed in preterm placentas, is a major risk factor for the development of infection and non-infection-related adverse perinatal outcomes. MicroRNAs play important roles in immune cell development and function as well as in the development of cancers and neurologic diseases. We sought to investigate the changes in microRNA-223 (miR-223) expression and the functional significance of the changes in miR-223 expression in foetal organs in the presence of acute chorioamnionitis.

Identification of genes dysregulated by elevation of microRNA-210 levels in human trophoblasts cell line, Swan 71.

Problem: Preeclampsia is a serious pregnancy disorder characterized by gestational hypertension and proteinuria. miR-210 is significantly overexpressed in the placentas of preeclampsia patients.

Method Of Study: Swan 71 cells, first-trimester human trophoblastic cell line, were transfected with hsa-miR-210-3p oligonucleotides by electroporation.

Cinnamaldehyde derivatives inhibit degranulation and inflammatory mediator production in rat basophilic leukemia cells.

Mast cells play a critical role in allergic diseases. Therefore, development of new therapeutic agents that suppresses the activation of mast cells may help prevent or treat allergic diseases. Here, we investigated the anti-allergic effects of 4-chloro-cinnamaldehyde and 4-trifluoro-cinnamaldehyde in RBL-2H3 cells.

Coptis chinensis Franch. extract up-regulate type I helper T-cell cytokine through MAPK activation in MOLT-4 T cell.

Ethnopharmacological Relevance: The dried rhizome of Coptis chinensis Franch. (Huanglian) has been widely used in Asian traditional medicine. It was already known that Coptis chinensis Franch.

Carbon-Impurity Affected Depth Elemental Distribution in Solution-Processed Inorganic Thin Films for Solar Cell Application.

A common feature of the inorganic thin films including Cu(In,Ga)(S,Se)2 fabricated by nonvacuum solution-based approaches is the doubled-layered structure, with a top dense inorganic film and a bottom carbon-containing residual layer. Although the latter has been considered to be the main efficiency limiting factor, (as a source of high series resistance), the exact influence of this layer is still not clear, and contradictory views are present. In this study, using a CISe as a model system, we report experimental evidence indicating that the carbon residual layer itself is electrically benign to the device performance.

The Role of Positron Emission Tomography/Computed Tomography in Management and Prediction of Survival in Pancreatic Cancer.

The role of positron emission tomography (PET) and PET/computed tomography (CT) in the management of pancreatic cancer patients has not been clearly established. Although value of PET/CT in the staging of pancreatic cancer is still being debated, several studies pointed to its superior role in determining therapy response, recurrence detection, and survival prediction in comparison to conventional imaging including contrast-enhanced CT. This article reviews the current literature on usefulness of PET/CT in the management of pancreatic cancer patients.

Enhanced Photoelectrochemical Solar Water Splitting Using a Platinum-Decorated CIGS/CdS/ZnO Photocathode.

A Cu(InGa)Se2 film was modified with CdS/ZnO for application to solar water splitting. Platinum was electrodeposited on the ZnO layer as a hydrogen evolution catalyst. The effects of the electroplating time and acidity level of the electrolyte on the photocurrent density were studied.

Carbon monoxide poisoning-induced cardiomyopathy from charcoal at a barbecue restaurant: a case report.

Objective: Acute carbon monoxide poisoning has important clinical value because it can cause severe adverse cardiovascular effects and sudden death. Acute carbon monoxide poisoning due to charcoal is well reported worldwide, and increased use of charcoal in the restaurant industry raises concern for an increase in occupational health problems. We present a case of carbon monoxide poisoning induced cardiomyopathy in a 47-year-old restaurant worker.

Carbon- and oxygen-free Cu(InGa)(SSe)₂ solar cell with a 4.63% conversion efficiency by electrostatic spray deposition.

We have demonstrated the first example of carbon- and oxygen-free Cu(In,Ga)(SSe)2 (CIGSSe) absorber layers prepared by electrospraying a CuInGa (CIG) precursor followed by annealing, sulfurization, and selenization at elevated temperature. X-ray diffraction and scanning electron microscopy showed that the amorphous as-deposited (CIG) precursor film was converted into polycrystalline CIGSSe with a flat-grained morphology after post-treatment. The optimal post-treatment temperature was 300 °C for annealing and 500 °C for both sulfurization and selenization, with a ramp rate of 5 °C/min.

Amorphous Cu-In-S nanoparticles as precursors for CuInSe2 thin-film solar cells with a high efficiency.

CuInSe2 (CISe) absorber layers for thin-film solar cells were fabricated through the selenization of amorphous Cu-In-S nanoparticles, which were prepared by using a low-temperature colloidal process within one minute without any external heating. Two strategies for obtaining highly dense CISe absorber films were used in this work; the first was the modification of nanoparticle surface through chelate complexation with ethanolamine, and the second strategy utilized the lattice expansion that occurred when S atoms in the precursor particles were replaced with Se during selenization. The synergy of these two strategies allowed formation of highly dense CISe thin films, and devices fabricated using the absorber layer demonstrated efficiencies of up to 7.

CuInSe₂ thin-film solar cells with 7.72 % efficiency prepared via direct coating of a metal salts/alcohol-based precursor solution.

A simple direct solution coating process for forming CuInSe₂ (CIS) thin films was described, employing a low-cost and environmentally friendly precursor solution. The precursor solution was prepared by mixing metal acetates, ethanol, and ethanolamine. The facile formation of a precursor solution without the need to prefabricate nanoparticles enables a rapid and easy processing, and the high stability of the solution in air further ensures the precursor preparation and the film deposition in ambient conditions without a glove box.

The Schizosaccharomyces pombe inv1+ regulatory region is unusually large and contains redundant cis-acting elements that function in a SAGA- and Swi/Snf-dependent fashion.

The Schizosaccharomyces pombe inv1(+) gene encodes invertase, the enzyme required for hydrolysis of sucrose and raffinose. Transcription of inv1(+) is regulated by glucose levels, with transcription tightly repressed in high glucose and strongly induced in low glucose. To understand this regulation, we have analyzed the inv1(+) cis-regulatory region and the requirement for the trans-acting coactivators SAGA and Swi/Snf.

CuInSe2 (CIS) thin films prepared from amorphous Cu-In-Se nanoparticle precursors for solar cell application.

CuInSe(2) (CIS) absorber layers for thin film solar cells were formed via a nonvacuum route using nanoparticle precursors. A low-temperature colloidal process was used to prepare nanoparticles by which amorphous Cu-In-Se nanoparticles were formed within 1 min of reaction without any external heating. Raman spectra of the particles revealed that they were presumably mixtures of amorphous Cu-Se and In-Se binaries.

MR imaging findings of a primary cardiac osteosarcoma and its bone metastasis with histopathologic correlation.

An osteosarcoma of cardiac origin is extremely rare, and a comprehensive description of MR imaging (MRI) findings of cardiac osteosarcoma and its metastasis in the femur have not been reported in the literature. We present a case of cardiac osteosarcoma in a 47-year-old woman and its metastasis to the femur, focusing on the description of MRI findings of the cardiac and metastatic bony osteosarcoma with a histopathologic correlation.