Redox-active Co(II) and Zn(II) Pincer Complexes as High-Capacity Anode Materials for Lithium-Ion Batteries.

To address the ongoing demand for high-performance energy storage devices, it is crucial to identify new electrode materials. Lithium-ion batteries (LIBs) store energy via the electrochemical redox process, so their electrode materials should have reversible redox properties for rechargeability. On that note, redox-active metal complexes are explored as innovative electrode materials for LIBs.

Lignin-based flame retardant via sequential purification-nanoparticle formation, and NP coupled chemical modification.

A nonhalogenated and ecofriendly flame-retarding material was developed using lignin, one of the main components of lignocellulosic biopolymers. Lignin was purified, dissolved, and formulated as nanoparticles and implemented after processing in an ecofriendly water-based γ-valerolactone (GVL) system at different concentrations. Nitrogen‑phosphorus sequential chemical modification was performed using polyethyleneimine (PEI) and phytic acid (PA), The char residue increased by ≥10 % compared with lignin nanoparticles (LNPs).

Synergistic Combination of Dual Clays in Multilayered Nanocomposites for Enhanced Flame Retardant Properties.

In an effort to reduce the flammability of synthetic polymeric materials such as cotton fabrics and polyurethane foam (PUF), hybrid nanocoatings are prepared by layer-by-layer assembly. Multilayered nanocomposites of a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA), are paired with two kinds of clay nanoplatelets, montmorillonite (MMT) and vermiculite (VMT). The physical properties such as thickness and mass and thermal behaviors in clay-based nanocoatings with and without incorporation of tris buffer are compared to assess the effectiveness of amine salts on flame retardant (FR) performances.

Lateral Size Effect of Graphene Oxide on Its Surface-Enhanced Raman Scattering Property.

The lateral size effect of graphene oxide (GO) on surfaced-enhanced Raman scattering (SERS) property is systematically investigated by using size-fractionalized GO. For the size fractionalization without changes of chemical structure, large-sized GO (LGO) and small-sized GO (SGO) are separated from the as-synthesized GO (AGO) by centrifugation and membrane filtration, respectively. The size-fractionalized GO sheets are immobilized on a solid substrate for the parallel comparison of their SERS property.

Understanding an Exceptionally Fast and Stable Li-Ion Charging of Highly Fluorinated Graphene with Fine-Controlled C-F Configuration.

Fluorine (F) atoms with the highest electronegativity and low polarizability can easily modify the surface and composition of carbon-based electrode materials. However, this is accompanied by complete irreversibility and uncontrolled reactivity, thus hindering their use in rechargeable electronic devices. Therefore, understanding the electrochemical effects of the C-F configuration might lead to achieving superior electrochemical properties.

Upcycling Plastic Waste into High Value-Added Carbonaceous Materials.

Even though plastic improved the human standard of living, handling the plastic waste represents an enormous challenge. It takes more than 100 years to decompose discarded or buried waste plastics. Microplastics are one of the causes of significantly pervasive environmental pollutants.

Fabrication of Fiber@Microporous Organic Polymer with Amino Groups@Cu Films for Flexible and Metal-Economical Electromagnetic Interference Shielding Materials.

Flexible and metal-economical electromagnetic interference (EMI) shielding films were fabricated based on microporous organic polymer (MOP) chemistry. MOP with amino groups (MOP-A) could be introduced to the surface of poly(ethylene terephthalate) (PET) fibers. Due to the microporosity and amino groups of MOP-A, Ag could be easily incorporated into PET@MOP-A.

High-toughness natural polymer nonwoven preforms inspired by silkworm cocoon structure.

As the interest in environmentally friendly materials and concerns regarding depletion of petroleum resources has increased, the research on natural polymers is being actively pursued. Among the various materials based on natural polymeric resources, the interest in using natural fibers in bio-composites has grown due to their lightweight, non-toxicity, low cost, and abundance. However, the lack of interfacial adhesion between filaments and poor water resistance make the use of natural fiber-based polymer composites less attractive.

Pyrolytic Carbon Nanosheets for Ultrafast and Ultrastable Sodium-Ion Storage.

Na-ion cointercalation in the graphite host structure in a glyme-based electrolyte represents a new possibility for using carbon-based materials (CMs) as anodes for Na-ion storage. However, local microstructures and nanoscale morphological features in CMs affect their electrochemical performances; they require intensive studies to achieve high levels of Na-ion storage performances. Here, pyrolytic carbon nanosheets (PCNs) composed of multitudinous graphitic nanocrystals are prepared from renewable bioresources by heating.

Ultra strong pyroprotein fibres with long-range ordering.

Silks are protein-based natural structured materials with an unusual combination of high strength and elongation. Their unique microstructural features composed of hard β-sheet crystals aligned within a soft amorphous region lead to the robust properties of silks. Herein we report a large enhancement in the intrinsic properties of silk through the transformation of the basic building blocks into a poly-hexagonal carbon structure by a simple heat treatment with axial stretching.

Long-Lasting NbO-Based Nanocomposite Materials for Li-Ion Storage.

Advanced nanostructured hybrid materials can help us overcome the electrochemical performance limitations of current energy storage devices. In this study, three-dimensional porous carbon nanowebs (3D-CNWs) with numerous included orthorhombic NbO (T-NbO) nanoparticles were fabricated using a microbe-derived nanostructure. The 3D-CNW/T-NbO nanocomposites showed an exceptionally stable long-term cycling performance over 70 000 cycles, a high reversible capacity of ∼125 mA h g, and fast Li-ion storage kinetics in a coin-type two-electrode system using Li metal.

Pyroprotein-Based Electronic Textiles with High Stability.

Thermally reducible pyroprotein-based electronic textiles (e-textiles) are fabricated using graphene oxide and a pyroprotein such as cocoon silk and spider web without any chemical agents. The electrical conductivity of the e-textile is 11.63 S cm , which is maintained even in bending, washing, and temperature variation.

Sodium-Ion Storage in Pyroprotein-Based Carbon Nanoplates.

Pyroprotein-based carbon nanoplates are fabricated from self-assembled silk proteins as a versatile platform to examine sodium-ion storage characteristics in various carbon environments. It is found that, depending on the local carbon structure, sodium ions are stored via chemi-/physisorption, insertion, or nanoclustering of metallic sodium.

Carbonization of a stable β-sheet-rich silk protein into a pseudographitic pyroprotein.

Silk proteins are of great interest to the scientific community owing to their unique mechanical properties and interesting biological functionality. In addition, the silk proteins are not burned out following heating, rather they are transformed into a carbonaceous solid, pyroprotein; several studies have identified potential carbon precursors for state-of-the-art technologies. However, no mechanism for the carbonization of proteins has yet been reported.

Nylon 610/graphene oxide composites prepared by in-situ interfacial polymerization.

Nylon 610/nylon 610-grafted graphene oxide (nylon 610/GO-g-nylon 610) composites were fabricated using acyl chloride-functionalized graphene oxide by in-situ interfacial polymerization. GO-g-nylon 610 was synthesized by the condensation reaction between the acyl chloride groups of GO and the amino groups at the nylon 610 chains during the in-situ polymerization. Nylon 610/GO composites without grafting nylon 610 onto GO were also prepared to investigate the influence of grafting nylon 610 on the interfacial adhesion between GO and the nylon 610 matrix.

Silver nanowire catalysts on carbon nanotubes-incorporated bacterial cellulose membrane electrodes for oxygen reduction reaction.

Silver nanowires have unique electrical, thermal and optical properties, which support their potential application in numerous fields including catalysis, electronics, optoelectronics, sensing, and surface-enhanced spectroscopy. Especially, their application such as catalysts for alkaline fuel cells (AFCs) have attracted much interest because of their superior electrical conductivity over that of any metal and their lower cost compared to Pt. In this study, multiwalled carbon nanotubes (MWCNTs)-incorporated bacterial cellulose (BC) membrane electrode with silver nanowire catalyst was prepared.

Microporous carbon nanoplates from regenerated silk proteins for supercapacitors.

Novel carbon-based microporous nanoplates containing numerous heteroatoms (H-CMNs) are fabricated from regenerated silk fibroin by the carbonization and activation of KOH. The H-CMNs exhibit superior electrochemical performance, displaying a specific capacitance of 264 F/g in aqueous electrolytes, a specific energy of 133 Wh/kg, a specific power of 217 kW/kg, and a stable cycle life over 10000 cycles.

Bacterial cellulose nanocrystals-embedded silk nanofibers.

Nanofibrous Bacterial cellulose nanocrystals (BCNs)-embedded silk fibroin were successfully fabricated using electrospinning. The morphology, structure and mechanical properties of the silk fibroin nanofibers were investigated at various BCNs concentrations from 0 to 7 wt%. SEM, TEM and XRD analyses were conducted to confirm the incorporation of the BCNs in the electrospun silk fibroin nanofibers.

Improved thermal properties of graphene oxide-incorporated poly(methyl methacrylate) microspheres.

Graphene, a single layer of carbon atoms in a two-dimensional lattice, has attracted considerable attention owing to its unique physical, chemical and mechanical properties. In particular, because of its excellent thermal properties such as high thermal conductivity and good thermal stability, graphene has been regarded as a one of the promising candidates for the reinforcing fillers on the polymer composites field. In this study, we prepared the poly(methyl methacrylate) (PMMA)/graphene oxide (GO) nanocomposite by a simple solution mixing process, and examined the thermal reinforcing effects of GO on a PMMA matrix.

Silk fibroin particles as templates for mineralization of calcium-deficient hydroxyapatite.

Silk fibroin particles prepared by phase separation with polyethylene oxide were coated with calcium-deficient hydroxyapatite (CDHA) crystals under various pH conditions. For different pH values, the growth and the morphology of CDHA crystals on the surface of silk fibroin particles were investigated in detail by zeta potential analysis, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction techniques. Negative charges formed by deprotonation of the functional groups on the surface of silk fibroin particles at high pH lead to an increase of binding affinity between the calcium ions of the CDHA crystals and the functional groups of the silk fibroin particles.

Flexible bio-composites based on silks and celluloses.

Biomaterials have attracted worldwide attention due to the concerns regarding health and the environment. Silk, a natural protein produced by several species of insects, has been examined as a potential material for applications in many biotechnological and biomedical fields. However, regenerated silk fibroin has poor ductility and mechanical properties.

Controlling microstructure of three-dimensional scaffolds from regenerated silk fibroin by adjusting pH.

For tissue engineering, it is very important to design and control the pore architecture of three-dimensional (3D) polymeric scaffolds, which plays an important role in directing tissue formation and function. In this study, 3D porous silk fibroin scaffolds produced using a freeze drying technique were prepared at pHs ranging from 5 to 9. The effects of pH on the pore microstructure of the silk fibroin scaffold were examined by rheometry, FESEM and FTIR.

Alkylated graphene nanosheet composites with polyaniline nanofibers.

We demonstrate a simple method to prepare alkylated graphene/polyaniline composites (a-GR/PANI) using solution mixing of exfoliated alkyl Iodododecane treated graphene oxide sheets with polyaniline nanofiber; polyaniline nanofibers (PANI) prepared by using rapid mixing polymerization significantly improve the processibility of polyaniline and its performance in many conventional applications. Also, polyaniline nanofibers exhibit excellent water dispersibility due to their uniform nanofiber morphology. Morphological study using SEM and TEM analysis showed that the fibrous PANI in the composites a-GR/PANI mainly adsorbed onto the surface or intercalated between the graphene sheets, due especially to the good interfacial interaction between the alkylated gaphene and the polyaniline nanofibers.

Adsorption behavior of carbon nanotubes on polystyrene surfaces.

Polystyrene (PS) was prepared using two different polymerization methods (dispersion polymerization and seed polymerization) to investigate the steric stabilizer effect during the adsorption process of carbon nanotubes (CNTs) on the surface of PS microspheres. Experiments with different microsphere diameters and difference types of CNTs were conducted to analyze the curvature effect of the spheres on the adsorption mechanism. The results showed that PS microspheres prepared through dispersion polymerization exhibited preferable adsorption behavior compared to PS spheres prepared through seed polymerization, suggesting that poly(N-vinylpyrrolidone) led to improved adsorption interactions between the CNTs and the PS microspheres in the CNTs dispersion.

Morphology and pore characteristics of bacterial cellulose/multiwalled carbon nanotube composite cryogels.

Bacterial cellulose/multiwalled carbon nanotube (MWCNT) composite cryogels were prepared via sol-gel chemistry using epichlorohydrin as a crosslinker. Their morphology and pore characteristics were examined under various conditions. The bacterial cellulose/MWCNT composite cryogels had a macroporous structure that contained mesopores and micropores due to the MWCNTs that were homogeneously incorporated in the macroporous network structure.