Rapid prototyping of perfusion cell culture devices for three-dimensional imaging of mesenchymal stem cell deposition and proliferation.

Perfusion of porous scaffolds transports cells to the surface to yield cellular constructs for 3D models of disease and for tissue engineering applications. While ceramic scaffolds mimic the structure and composition of trabecular bone, their opacity and tortuous pores limit the penetration of light into the interior. Scaffolds that are both perfusable and amenable to fluorescence microscopy are therefore needed to visualize the spatiotemporal dynamics of cells in the bone microenvironment.

Nanoparticle STING Agonist Reprograms the Bone Marrow to an Antitumor Phenotype and Protects Against Bone Destruction.

Unlabelled: When breast cancer metastasizes to bone, treatment options are limited. Failure to treat bone metastases is thought to be due to therapy-resistant features of the bone marrow microenvironment. Using a murine model of bone metastatic mammary carcinoma, we demonstrate that systemic delivery of polymer nanoparticles loaded with cyclic dinucleotide (CDN) agonists of stimulator of interferon genes (STING) inhibited tumor growth and bone destruction after 7 days of treatment.

Reactive oxygen species-degradable polythioketal urethane foam dressings to promote porcine skin wound repair.

Porous, resorbable biomaterials can serve as temporary scaffolds that support cell infiltration, tissue formation, and remodeling of nonhealing skin wounds. Synthetic biomaterials are less expensive to manufacture than biologic dressings and can achieve a broader range of physiochemical properties, but opportunities remain to tailor these materials for ideal host immune and regenerative responses. Polyesters are a well-established class of synthetic biomaterials; however, acidic degradation products released by their hydrolysis can cause poorly controlled autocatalytic degradation.

A Perfusion Bioreactor Model of Tumor-Induced Bone Disease Using Human Cells.

Advanced solid tumors often metastasize to bone. Once established in bone, these tumors can induce bone destruction resulting in decreased quality of life and increased mortality. Neither 2D in vitro models nor 3D animal models sufficiently recapitulate the human bone-tumor microenvironment needed to fully understand the complexities of bone metastasis, highlighting the need for new models.

Effect of Intramedullary Nailing Patterns on Interfragmentary Strain in a Mouse Femur Fracture: A Parametric Finite Element Analysis.

Delayed long bone fracture healing and nonunion continue to be a significant socioeconomic burden. While mechanical stimulation is known to be an important determinant of the bone repair process, understanding how the magnitude, mode, and commencement of interfragmentary strain (IFS) affect fracture healing can guide new therapeutic strategies to prevent delayed healing or nonunion. Mouse models provide a means to investigate the molecular and cellular aspects of fracture repair, yet there is only one commercially available, clinically-relevant, locking intramedullary nail (IMN) currently available for studying long bone fractures in rodents.

Rapid prototyping of cell culture microdevices using parylene-coated 3D prints.

Fabrication of microfluidic devices by photolithography generally requires specialized training and access to a cleanroom. As an alternative, 3D printing enables cost-effective fabrication of microdevices with complex features that would be suitable for many biomedical applications. However, commonly used resins are cytotoxic and unsuitable for devices involving cells.

Settable Polymeric Autograft Extenders in a Rabbit Radius Model of Bone Formation.

Autograft (AG) is the gold standard for bone grafts, but limited quantities and patient morbidity are associated with its use. AG extenders have been proposed to minimize the volume of AG while maintaining the osteoinductive properties of the implant. In this study, poly(ester urethane) (PEUR) and poly(thioketal urethane) (PTKUR) AG extenders were implanted in a 20-mm rabbit radius defect model to evaluate new bone formation and graft remodeling.

Conditioning the microenvironment for soft tissue regeneration in a cell free scaffold.

The use of cell-free scaffolds for the regeneration of clinically relevant volumes of soft tissue has been challenged, particularly in the case of synthetic biomaterials, by the difficulty of reconciling the manufacturing and biological performance requirements. Here, we investigated in vivo the importance of biomechanical and biochemical cues for conditioning the 3D regenerative microenvironment towards soft tissue formation. In particular, we evaluated the adipogenesis changes related to 3D mechanical properties by creating a gradient of 3D microenvironments with different stiffnesses using 3D Poly(Urethane-Ester-ether) PUEt scaffolds.

Effects of nanocrystalline hydroxyapatite concentration and skeletal site on bone and cartilage formation in rats.

Most fractures heal by a combination of endochondral and intramembranous ossification dependent upon strain and vascularity at the fracture site. Many biomaterials-based bone regeneration strategies rely on the use of calcium phosphates such as nano-crystalline hydroxyapatite (nHA) to create bone-like scaffolds. In this study, nHA was dispersed in reactive polymers to form composite scaffolds that were evaluated both in vitro and in vivo.

Diflunisal-loaded poly(propylene sulfide) nanoparticles decrease S. aureus-mediated bone destruction during osteomyelitis.

Osteomyelitis is a debilitating infection of bone that results in substantial morbidity. Staphylococcus aureus is the most commonly isolated pathogen causing bone infections and features an arsenal of virulence factors that contribute to bone destruction and counteract immune responses. We previously demonstrated that diflunisal, a nonsteroidal anti-inflammatory drug, decreases S.

Principles of computer-controlled linear motion applied to an open-source affordable liquid handler for automated micropipetting.

OTTO is an open-source automated liquid handler that can be fabricated at a cost of $1,500 using off-the-shelf and 3D-printable parts as an alternative to commercial devices. Open-source approaches have been applied to build syringe pumps, centrifuges, and other laboratory equipment. These devices are affordable but generally rely on a single motor to perform simple operations and thus do not fully utilize the potential of the Maker Movement.

Compression-Resistant Polymer/Ceramic Composite Scaffolds Augmented with rhBMP-2 Promote New Bone Formation in a Nonhuman Primate Mandibular Ridge Augmentation Model.

Purpose: This study was designed to test the hypothesis that compression-resistant (CR) scaffolds augmented with recombinant human bone morphogenetic protein-2 (rhBMP-2) at clinically relevant doses in a nonhuman primate lateral ridge augmentation model enhances bone formation in a dose-responsive manner without additional protective membranes.

Materials And Methods: Defects (15 mm long × 8 mm wide × 5 mm deep) were created bilaterally in the mandibles of nine hamadryas baboons. The defect sites were implanted with poly(ester urethane) (PEUR)/ceramic CR scaffolds augmented with 0 mg/mL rhBMP-2 (CR control), 0.

Nanocrystalline hydroxyapatite-poly(thioketal urethane) nanocomposites stimulate a combined intramembranous and endochondral ossification response in rabbits.

Resorbable bone cements are replaced by bone osteoclastic resorption and osteoblastic new bone formation near the periphery. However, the ideal bone cement would be replaced by new bone through processes similar to fracture repair, which occurs through a variable combination of endochondral and intramembranous ossification. In this study, nanocrystalline hydroxyapatite (nHA)-poly(thioketal urethane) (PTKUR) cements were implanted in femoral defects in New Zealand White rabbits to evaluate ossification at 4, 12, and 18 months.

Concurrent Local Delivery of Diflunisal Limits Bone Destruction but Fails To Improve Systemic Vancomycin Efficacy during Staphylococcus aureus Osteomyelitis.

osteomyelitis is a debilitating infection of bone. Treatment of osteomyelitis is impaired by the propensity of invading bacteria to induce pathological bone remodeling that may limit antibiotic penetration to the infectious focus. The nonsteroidal anti-inflammatory drug diflunisal was previously identified as an osteoprotective adjunctive therapy for osteomyelitis, based on the ability of this compound to inhibit quorum sensing and subsequent quorum-dependent toxin production.

Tuning Ligand Density To Optimize Pharmacokinetics of Targeted Nanoparticles for Dual Protection against Tumor-Induced Bone Destruction.

Breast cancer patients are at high risk for bone metastasis. Metastatic bone disease is a major clinical problem that leads to a reduction in mobility, increased risk of pathologic fracture, severe bone pain, and other skeletal-related events. The transcription factor Gli2 drives expression of parathyroid hormone-related protein (PTHrP), which activates osteoclast-mediated bone destruction, and previous studies showed that Gli2 genetic repression in bone-metastatic tumor cells significantly reduces tumor-induced bone destruction.

Systemic delivery of a Gli inhibitor via polymeric nanocarriers inhibits tumor-induced bone disease.

Solid tumors frequently metastasize to bone and induce bone destruction leading to severe pain, fractures, and other skeletal-related events (SREs). Osteoclast inhibitors such as bisphosphonates delay SREs but do not prevent skeletal complications or improve overall survival. Because bisphosphonates can cause adverse side effects and are contraindicated for some patients, we sought an alternative therapy to reduce tumor-associated bone destruction.

Poly(Thioketal Urethane) Autograft Extenders in an Intertransverse Process Model of Bone Formation.

The development of autograft extenders is a significant clinical need in bone tissue engineering. We report new settable poly(thioketal urethane)-based autograft extenders that have bone-like mechanical properties and handling properties comparable to calcium phosphate bone cements. These settable autograft extenders remodeled to form new bone in a biologically stringent intertransverse process model of bone formation that does not heal when treated with calcium phosphate bone void fillers or cements alone.

Localized low-dose rhBMP-2 is effective at promoting bone regeneration in mandibular segmental defects.

At least 26% of recent battlefield injuries are to the craniomaxillofacial (CMF) region. Recombinant human bone morphogenetic protein 2 (rhBMP-2) is used to treat CMF open fractures, but several complications have been associated with its use. This study tested the efficacy and safety of a lower (30% recommended) dose of rhBMP-2 to treat mandibular fractures.

Injectable, compression-resistant polymer/ceramic composite bone grafts promote lateral ridge augmentation without protective mesh in a canine model.

Objective: The objective of this study was to test the hypothesis that a compression-resistant bone graft augmented with recombinant human morphogenetic protein-2 (rhBMP-2) will promote lateral ridge augmentation without the use of protective mesh in a canine model.

Materials & Methods: Compression-resistant (CR) bone grafts were evaluated in a canine model of lateral ridge augmentation. Bilateral, right trapezoidal prism-shaped defects (13-14 mm long × 8-9 mm wide × 3-4 mm deep at the base) in 13 hounds (two defects per hound) were treated with one of four groups: (i) absorbable collagen sponge + 400 μg rhBMP-2/ml (ACS, clinical control) protected by titanium mesh, (ii) CR without rhBMP-2 (CR, negative control), (iii) CR + 200 μg rhBMP-2 (CR-L), or (iv) CR + 400 μg rhBMP-2 (CR-H).

Settable polymer/ceramic composite bone grafts stabilize weight-bearing tibial plateau slot defects and integrate with host bone in an ovine model.

Bone fractures at weight-bearing sites are challenging to treat due to the difficulty in maintaining articular congruency. An ideal biomaterial for fracture repair near articulating joints sets rapidly after implantation, stabilizes the fracture with minimal rigid implants, stimulates new bone formation, and remodels at a rate that maintains osseous integrity. Consequently, the design of biomaterials that mechanically stabilize fractures while remodeling to form new bone is an unmet challenge in bone tissue engineering.

Exploring the potential of polyurethane-based soft foam as cell-free scaffold for soft tissue regeneration.

Unlabelled: Reconstructive treatment after trauma and tumor resection would greatly benefit from an effective soft tissue regeneration. The use of cell-free scaffolds for adipose tissue regeneration in vivo is emerging as an attractive alternative to tissue-engineered constructs, since this approach avoids complications due to cell manipulation and lack of synchronous vascularization. In this study, we developed a biodegradable polyurethane-based scaffold for soft tissue regeneration, characterized by an exceptional combination between softness and resilience.

3D bone models to study the complex physical and cellular interactions between tumor and the bone microenvironment.

As the complexity of interactions between tumor and its microenvironment has become more evident, a critical need to engineer in vitro models that veritably recapitulate the 3D microenvironment and relevant cell populations has arisen. This need has caused many groups to move away from the traditional 2D, tissue culture plastic paradigms in favor of 3D models with materials that more closely replicate the in vivo milieu. Creating these 3D models remains a difficult endeavor for hard and soft tissues alike as the selection of materials, fabrication processes, and optimal conditions for supporting multiple cell populations makes model development a nontrivial task.

Poly(glycidol) Coating on Ultrahigh Molecular Weight Polyethylene for Reduced Biofilm Growth.

Semibranched poly(glycidol) (PG-OH) and poly(glycidol allylglycidyl ether) (PG-Allyl) coatings were formed on ultrahigh molecular weight polyethylene (UMWPE) in a unique two-step process which included radiation of UHMWPE followed by grafting of PG-OH or PG-Allyl to the surface via free radical cross-linking. Resulting surfaces were extensively characterized by FTIR-ATR, XPS, fluorescent microscopy, and contact goniometry. The performance was evaluated using the most prominent biofilm-forming bacteria Staphylococcus aureus for 24 and 48 h.

Fabrication of Trabecular Bone-Templated Tissue-Engineered Constructs by 3D Inkjet Printing.

3D printing enables the creation of scaffolds with precisely controlled morphometric properties for multiple tissue types, including musculoskeletal tissues such as cartilage and bone. Computed tomography (CT) imaging has been combined with 3D printing to fabricate anatomically scaled patient-specific scaffolds for bone regeneration. However, anatomically scaled scaffolds typically lack sufficient resolution to recapitulate the <100 micrometer-scale trabecular architecture essential for investigating the cellular response to the morphometric properties of bone.

Porcine Ischemic Wound-Healing Model for Preclinical Testing of Degradable Biomaterials.

Impaired wound healing that mimics chronic human skin pathologies is difficult to achieve in current animal models, hindering testing and development of new therapeutic biomaterials that promote wound healing. In this article, we describe a refinement and simplification of the porcine ischemic wound model that increases the size and number of experimental sites per animal. By comparing three flap geometries, we adopted a superior configuration (15 × 10 cm) that enabled testing of twenty 1 cm wounds in each animal: 8 total ischemic wounds within 4 bipedicle flaps and 12 nonischemic wounds.