Relative sensitivity of hydrodynamic, thermodynamic, and chemical processes for simulating the buoyant multiphase plume and surfacing flows of an oil and gas blowout.

Deepwater hydrocarbon releases experience complex chemical and physical processes. To assess simplifications of these processes on model predictions, we present a sensitivity analysis using simulations for the Deepwater Horizon oil spill. We compare the buoyant multiphase plume metrics (trap height, rise time etc), the hydrocarbon mass flowrates at the near-field plume termination and their mass fractions dissolved in the water column and reaching the water surface.

Development of an offshore response guidance tool for determining the impact of SSDI on released gas and benzene from artificial subsea oil well blowout simulations.

We present an analysis of 2225 simulations of artificial oil well blowouts in nearshore and offshore waters of Newfoundland, Canada. In the simulations, we coupled the VDROP-J and TAMOC models to simulate the fate and transport of oil and gas from the release to the sea surface. Simulations were conducted with and without subsea dispersant injection.

Oil Transport Following the Blowout.

The oil spill in the Gulf of Mexico in 2010 was the largest in US history, covering more than 1,000 km of shorelines and causing losses that exceeded $50 billion. While oil transformation processes are understood at the laboratory scale, the extent of the spill made it challenging to integrate these processes in the field. This review tracks the oil during its journey from the Mississippi Canyon block 252 (MC252) wellhead, first discussing the formation of the oil and gas plume and the ensuing oil droplet size distribution, then focusing on the behavior of the oil on the water surface with and without waves.

Dynamics of Live Oil Droplets and Natural Gas Bubbles in Deep Water.

Explaining the dynamics of gas-saturated live petroleum in deep water remains a challenge. Recently, Pesch et al. [ 2018, 35 (4), 289-299] reported laboratory experiments on methane-saturated oil droplets under emulated deep-water conditions, providing an opportunity to elucidate the underlying dynamical processes.

The treatment of biodegradation in models of sub-surface oil spills: A review and sensitivity study.

Biodegradation is important for the fate of oil spilled in marine environments, yet parameterization of biodegradation varies across oil spill models, which usually apply constant first-order decay rates to multiple pseudo-components describing an oil. To understand the influence of model parameterization on the fate of subsurface oil droplets, we reviewed existing algorithms and rates and conducted a model sensitivity study. Droplets were simulated from a blowout at 2000 m depth and were either treated with sub-surface dispersant injection (2% dispersant to oil ratio) or untreated.

Tidal eddies at a narrow channel inlet in operational oil spill models.

In operational oil spill modeling, hydrodynamic models often employ a coarse-resolution grid for computational efficiency. However, this practical grid resolution poorly resolves small-scale flow features, such as starting jet vortices (tidal eddies) that are common at the inlet of bar-built estuaries with narrow inlet channels, particularly where channel dredging and jetties have been employed to aid ship traffic. These eddies influence Lagrangian transport paths and hence the fate of an oil spill potentially entering or leaving an estuary.

Oil spill modeling in deep waters: Estimation of pseudo-component properties for cubic equations of state from distillation data.

Deep-water oil spills represent a major, localized threat to marine ecosystems. Multi-purpose computer models have been developed to predict the fate of spilled oil. These models include databases of pseudo-components from distillation cut analysis for hundreds of oils, and have been used for guiding response action, damage assessment, and contingency planning for marine oil spills.

Behavior and dynamics of bubble breakup in gas pipeline leaks and accidental subsea oil well blowouts.

Subsea oil well blowouts and pipeline leaks release oil and gas to the environment through vigorous jets. Predicting the breakup of the released fluids in oil droplets and gas bubbles is critical to predict the fate of petroleum compounds in the marine water column. To predict the gas bubble size in oil well blowouts and pipeline leaks, we observed and quantified the flow behavior and breakup process of gas for a wide range of orifice diameters and flow rates.

Petroleum dynamics in the sea and influence of subsea dispersant injection during .

During the disaster, a substantial fraction of the 600,000-900,000 tons of released petroleum liquid and natural gas became entrapped below the sea surface, but the quantity entrapped and the sequestration mechanisms have remained unclear. We modeled the buoyant jet of petroleum liquid droplets, gas bubbles, and entrained seawater, using 279 simulated chemical components, for a representative day (June 8, 2010) of the period after the sunken platform's riser pipe was pared at the wellhead (June 4-July 15). The model predicts that 27% of the released mass of petroleum fluids dissolved into the sea during ascent from the pared wellhead (1,505 m depth) to the sea surface, thereby matching observed volatile organic compound (VOC) emissions to the atmosphere.

Droplet and bubble formation of combined oil and gas releases in subsea blowouts.

Underwater blowouts from gas and oil operations often involve the simultaneous release of oil and gas. Presence of gas bubbles in jets/plumes could greatly influence oil droplet formation. With the aim of understanding and quantifying the droplet formation from Deepwater Horizon blowout (DWH) we developed a new formulation for gas-oil interaction with jets/plumes.

Simulating Gas-Liquid-Water Partitioning and Fluid Properties of Petroleum under Pressure: Implications for Deep-Sea Blowouts.

With the expansion of offshore petroleum extraction, validated models are needed to simulate the behaviors of petroleum compounds released in deep (>100 m) waters. We present a thermodynamic model of the densities, viscosities, and gas-liquid-water partitioning of petroleum mixtures with varying pressure, temperature, and composition based on the Peng-Robinson equation-of-state and the modified Henry's law (Krychevsky-Kasarnovsky equation). The model is applied to Macondo reservoir fluid released during the Deepwater Horizon disaster, represented with 279-280 pseudocomponents, including 131-132 individual compounds.

Simulation of scenarios of oil droplet formation from the Deepwater Horizon blowout.

Knowledge of the droplet size distribution (DSD) from the Deepwater Horizon (DWH) blowout is an important step in predicting the fate and transport of the released oil. Due to the absence of measurements of the DSD from the DWH incident, we considered herein hypothetical scenarios of releases that explore the realistic parameter space using a thoroughly calibrated DSD model, VDROP-J, and we attempted to provide bounds on the range of droplet sizes from the DWH blowout within 200 m of the wellhead. The scenarios include conditions without and with the presence of dispersants, different dispersant treatment efficiencies, live oil and dead oil properties, and varying oil flow rate, gas flow rate, and orifice diameter.

Intercomparison of oil spill prediction models for accidental blowout scenarios with and without subsea chemical dispersant injection.

We compare oil spill model predictions for a prototype subsea blowout with and without subsea injection of chemical dispersants in deep and shallow water, for high and low gas-oil ratio, and in weak to strong crossflows. Model results are compared for initial oil droplet size distribution, the nearfield plume, and the farfield Lagrangian particle tracking stage of hydrocarbon transport. For the conditions tested (a blowout with oil flow rate of 20,000 bbl/d, about 1/3 of the Deepwater Horizon), the models predict the volume median droplet diameter at the source to range from 0.

Evolution of droplets in subsea oil and gas blowouts: development and validation of the numerical model VDROP-J.

The droplet size distribution of dispersed phase (oil and/or gas) in submerged buoyant jets was addressed in this work using a numerical model, VDROP-J. A brief literature review on jets and plumes allows the development of average equations for the change of jet velocity, dilution, and mixing energy as function of distance from the orifice. The model VDROP-J was then calibrated to jets emanating from orifices ranging in diameter, D, from 0.