Feasibility of controlled nitric oxide generation ascorbate induced chemical reduction of nitrite ions.

Inhalable nitric oxide (iNO) is a lifesaving, FDA-approved drug to improve oxygenation in persistent pulmonary hypertension of the newborn. iNO also has many other applications in lung diseases owing to its vasodilatory and antimicrobial effects. However, its wider therapeutic application is often prohibited by the high cost and logistical barriers of traditional NO/N gas tanks.

Antithrombotic and Antimicrobial Potential of S-Nitroso-1-Adamantanethiol-Impregnated Extracorporeal Circuit.

This study presents the utilization of a novel, highly lipophilic nitric oxide (NO) donor molecule, S-nitroso-1-adamantanethiol (SNAT), for developing an NO-emitting polymer surface aimed at preventing thrombus formation and bacterial infection in extracorporeal circuits (ECCs). S-nitroso-1-adamantanethiol, a tertiary nitrosothiol-bearing adamantane species, was synthesized, characterized, and used to impregnate polyvinyl chloride (PVC) tubing for subsequent in vivo evaluation. The impregnation process with SNAT preserved the original mechanical strength of the PVC.

Effect of PLGA raw materials on in vitro and in vivo performance of drug-loaded microspheres.

Poly(lactide-co-glycolide) and poly(lactic-co-glycolic acids) (PLGAs) play a critical role in the development of commercial long-acting injectable microsphere formulations. However, very little information is available describing the impact of PLGA manufacturer and monomer distribution along the polymer chain (e.g.

Aqueous remote loading of model cationic peptides in uncapped poly(lactide-co-glycolide) microspheres for long-term controlled release.

Remote loading microencapsulation of peptides into polymer microspheres without organic solvent represents a promising alternative to develop long-acting release depots relative to conventional encapsulation methods. Here, we formulated drug-free microspheres from two kinds of uncapped poly(lactide-co-glycolides) (PLGAs), i.e.

Mechanistic analysis of the photolytic decomposition of solid-state S-nitroso-N-acetylpenicillamine.

S-Nitroso-N-acetylpenicillamine (SNAP) is among the most common nitric oxide (NO)-donor molecules and its solid-state photolytic decomposition has potential for inhaled nitric oxide (iNO) therapy. The photochemical NO release kinetics and mechanism were investigated by exposing solid-state SNAP to a narrow-band LED as a function of nominal wavelength and intensity of incident light. The photolytic efficiency, decomposition products, and the photolytic pathways of the SNAP were examined.

Aqueous remote loading of setmelanotide in poly(lactic-co-glycolic acid) microspheres for long-term obesity treatment.

Setmelanotide (Imcivree™) was developed as a daily injectable therapeutic peptide for the treatment of rare forms of syndromic obesity, such as POMC deficiency and leptin receptor deficiency. The important option of poly(lactic-co-glycolic acid) (PLGA) controlled release microspheres has become more attractive for this class of drugs upon the discovery that net positively charged peptides can be remote-loaded rapidly from aqueous peptide solution into blank microspheres at high loading and encapsulation efficiency. Here we sought to remote-load setmelanotide in PLGA microspheres and examine its potential for long-term controlled release and body weight control.

In vitro performance of composition-equivalent PLGA microspheres encapsulating exenatide acetate by solvent evaporation.

The once-weekly Bydureon® (Bdn) PLGA microsphere formulation encapsulating the GLP-1 receptor agonist, exenatide acetate, is an important complex injectable product prepared by coacervation for the treatment of type 2 diabetic patients. Encapsulation by coacervation is useful to minimize an undesirable initial burst of exenatide, but it suffers from manufacturing difficulties such as process scale-up and batch-to-batch variations. Herein we prepared exenatide acetate-PLGA formulations of similar compositions using the desirable alternative double emulsion-solvent evaporation technique.

Mechanistic evaluation of the initial burst release of leuprolide from spray-dried PLGA microspheres.

Spray-dried poly(lactic-co-glycolic acid) (PLGA) peptide-loaded microspheres have demonstrated similar long-term in vitro release kinetics compared to those produced by the solvent evaporation method and commercial products. However, the difficult-to-control initial burst release over the first 24 h after administration presents an obstacle to product development and establishing bioequivalence. Currently, detailed information about underlying mechanisms of the initial burst release from microspheres is limited.

Mapping in vivo microclimate pH distribution in exenatide-encapsulated PLGA microspheres.

The pH inside the aqueous pores of poly(lactic-co-glycolic acid) (PLGA) microspheres, often termed microclimate pH (μpH), has been widely evaluated in vitro and shown to commonly be deleterious to pH-labile encapsulated drug molecules. However, whether the in vitro μpH is representative of the actual in vivo values has long been remained a largely unresolved issue. Herein we quantitatively mapped, for the first time, the in vivo μpH distribution kinetics inside degrading PLGA microspheres by combining two previously validated techniques, a cage implant system and confocal laser scanning microscopy.

Fenretinide combines perturbation of signaling kinases, cell-extracellular matrix interactions and matrix metalloproteinase activation to inhibit invasion in oral squamous cell carcinoma cells.

Basement membrane invasion defines malignant transformation of surface premalignancy. Treatment of oral squamous cell carcinoma (OSCC) cells with the synthetic vitamin A derivative, fenretinide (4HPR), induces numerous cancer-preventive effects including suppression of basement membrane invasion, elimination of anchorage-independent growth, disruption of actin cytoskeletal components and inhibition of the invasion-enabling focal adhesive kinase. The purpose of this study was to elucidate 4HPR's effects on additional invasion-relevant mechanisms including matrix metalloproteinase (MMP) activation and function, cell-extracellular matrix (ECM) attachments and interaction with a kinase that is essential for the epithelial-myoepithelial transformation i.

Effect of Surface Interactions on Microsphere Loading in Dissolving Microneedle Patches.

Microneedle (MN) patches enable simple self-administration of drugs via the skin. In this study, we sought to deliver drug-loaded microspheres (MSs) using MN patches and found that the poly(lactic--glycolic acid) (PLGA) MSs failed to localize in the MN tips during fabrication, thereby decreasing their delivered dose and delivery efficiency into skin. We determined that surface interactions between the hydrophobic MSs and the poly(dimethylsiloxane) (PDMS) mold caused MSs to adhere to the mold surface during casting in aqueous formulations, with hydrophobic interactions largely responsible for adhesion.

Efficient aqueous remote loading of peptides in poly(lactic-co-glycolic acid).

Poly(lactic-co-glycolic acid) (PLGA) long-acting release depots are effective for extending the duration of action of peptide drugs. We describe efficient organic-solvent-free remote encapsulation based on the capacity of common uncapped PLGA to bind and absorb into the polymer phase net positively charged peptides from aqueous solution after short exposure at modest temperature. Leuprolide encapsulated by this approach in low-molecular-weight PLGA 75/25 microspheres slowly and continuously released peptide for over 56 days in vitro and suppressed testosterone production in rats in an equivalent manner as the 1-month Lupron Depot®.

In vitro degradation and erosion behavior of commercial PLGAs used for controlled drug delivery.

Copolymers of lactic (or lactide) and glycolic (or glycolide) acids (PLGAs) are among the most commonly used materials in biomedical applications, such as parenteral controlled drug delivery, due to their biocompatibility, predictable degradation rate, and ease of processing. Besides manufacturing variables of drug delivery vehicles, changes in PLGA raw material properties can affect product behavior. Accordingly, an in-depth understanding of polymer-related "critical quality attributes" can improve selection and predictability of PLGA performance.

Optimizing zinc-HisTag coordination remote loading of proteins in PLGA microspheres.

Metal-HisTag coordination remote loading (MHCRL) of proteins in PLGA microspheres was previously developed to provide a useful tool for discovery and preclinical development of controlled release protein formulations. Here we describe optimization of MHCRL, including (1) reducing thermal stress, (2) decreasing the complexity and duration of the procedure, (3) increasing loading capacity, (4) increasing the penetration depth of protein, and (5) improving the release profile. Directly encapsulating ZnCOas a Znsource for HisTag coordination, rather than remotely loading Zn, increased the Zn content ∼6-fold.

Minimizing the initial burst of octreotide acetate from glucose star PLGA microspheres prepared by the solvent evaporation method.

Sandostatin long-acting release (SLAR) depot for 1-month controlled release of octreotide is a somatostatin analogue product that has been used extensively in the pharmacological treatment of acromegaly. The complexities in the SLAR coacervation manufacturing processes and the use of a unique glucose-starpoly(lactic-co-glycolic acid) (PLGA-glu) may have contributed to the lack of US FDA-approved generic products referencing SLAR in the USA. To address this challenge, we encapsulated octreotide acetate by the commonly used solvent evaporation method in microspheres of a similar composition to SLAR, including the use of a comparable PLGA-glu.

Metal-HisTag coordination for remote loading of very small quantities of biomacromolecules into PLGA microspheres.

Challenges to discovery and preclinical development of long-acting release systems for protein therapeutics include protein instability, use of organic solvents during encapsulation, specialized equipment and personnel, and high costs of proteins. We sought to overcome these issues by combining remote-loading self-healing encapsulation with binding HisTag protein to transition metal ions. Porous, drug-free self-healing microspheres of copolymers of lactic and glycolic acids with high molecular weight dextran sulfate and immobilized divalent transition metal (M) ions were placed in the presence of proteins with or without HisTags to bind the protein in the pores of the polymer before healing the surface pores with modest temperature.

Core-shell microneedle patch for six-month controlled-release contraceptive delivery.

There is a tremendous need for simple-to-administer, long-acting contraception, which can increase access to improved family planning. Microneedle (MN) patches enable simple self-administration and have previously been formulated for 1-2 months' controlled release of contraceptive hormone using monolithic polymer/drug MN designs having first-order release kinetics. To achieve zero-order release, we developed a novel core-shell MN patch where the shell acts as a rate-controlling membrane to delay release of a contraceptive hormone, levonorgestrel (LNG), for 6 months.

Engineering of Injectable Antibiotic-laden Fibrous Microparticles Gelatin Methacryloyl Hydrogel for Endodontic Infection Ablation.

This study aimed at engineering cytocompatible and injectable antibiotic-laden fibrous microparticles gelatin methacryloyl (GelMA) hydrogels for endodontic infection ablation. Clindamycin (CLIN) or metronidazole (MET) was added to a polymer solution and electrospun into fibrous mats, which were processed via cryomilling to obtain CLIN- or MET-laden fibrous microparticles. Then, GelMA was modified with CLIN- or MET-laden microparticles or by using equal amounts of each set of fibrous microparticles.

Coaxial electrospray of uniform polylactide core-shell microparticles for long-acting contraceptive.

Despite its high efficacy and good patient compliance, the only long-acting injectable (LAI) contraceptive currently available in the US, depot medroxyprogesterone acetate (DMPA), is limited by significant side effects and a delayed return to fertility for up to 10 months after its intended duration of action. To overcome these limitations, we sought to develop an injectable poly(D,l-lactide) (PLA) microparticle for sustained release of contraceptive hormone, etonogestrel (ENG). A one-step technique, coaxial electrospray method was applied to prepare uniform ENG loaded core-shell structured and slow-degrading PLA microparticles (ENG-cs-MPs) to provide release control while minimizing polymer content.

The Effects of pH and Excipients on Exenatide Stability in Solution.

Exenatide, a glucagon-like peptide-1 receptor agonist, is the active pharmaceutical ingredient in Byetta and Bydureon, two type 2 diabetes drug products that have generics and multiple follow-up formulations currently in development. Even though exenatide is known to be chemically and physically unstable at pH 7.5, there lacks a systematic evaluation of the impact of pH and excipients on the peptide solution stability.

Characterization of commercial PLGAs by NMR spectroscopy.

Poly(lactic-co-glycolic acid) (PLGA) is among the most common of biodegradable polymers studied in various biomedical applications such as drug delivery and tissue engineering. To facilitate the understanding of the often overlooked impact of PLGA microstructure on important factors affecting PLGA performance, we measured four key parameters of 17 commonly used commercial PLGA polymers (Expansorb®, Resomer®, Purasorb®, Lactel®, and Wako®) by NMR spectroscopy. HNMR and CNMR spectra were used to determine lactic to glycolic ratio (L/G ratio), polymer end-capping, glycolic blockiness (Rc), and average glycolic and lactic block lengths (L and L).

Immediate detachment of microneedles by interfacial fracture for sustained delivery of a contraceptive hormone in the skin.

Despite their high efficacy and safety, long-acting contraceptive methods are underutilized among women in some settings because they usually require injection or implantation by healthcare personnel. Here, we report a self-administrable microneedle (MN) patch for the rapid administration of a sustained-release contraceptive hormone delivery system into the skin that increases the simplicity and reliability of the MN delivery. We developed an immediate microneedle detachment system using a porous patch backing that has sufficient strength during MN insertion into skin under compression, but enables immediate detachment (< 1 s) of the MNs due to fracture at the MN - backing interface upon patch removal under tension from the skin surface.