Effect of powder air polishing and ultrasonic scaling on the marginal and internal interface (tooth-veneer) of ceramic veneers: an in vitro study.

Objectives: This study investigated the influence of prophylactic treatments and thermocycling on the marginal and internal veneering interface (tooth-veneer) as well as on the surface texture of ceramic veneers.

Materials And Methods: A total of 32 extracted human premolars were restored with veneers made of lithium disilicate (LDS) or zirconia-reinforced lithium silicate (ZLS). An artificial aging of the specimens was conducted via five cycles of both thermocycling (5/55°C) and prophylactic treatment (powder air polishing or ultrasonic scaling).

Facial and dental arch shape in individuals with different bite force levels : A pilot study using geometric morphometrics.

Purpose: This pilot study aimed to assess the relationship between bite force variation and dental arch and facial shape using geometric morphometrics, an advanced method of statistical analysis that provides a detailed shape analysis of a structure considering the spatial relationship of its parts.

Methods: The sample consisted of 16 German adult men and women. For each individual, maximum bite force was recorded in four positions: maximum intercuspation, protrusion, laterotrusion to the right and to the left.

Prey size reflected in tooth wear: a comparison of two wolf populations from Sweden and Alaska.

Ingesta leaves distinct patterns on mammalian teeth during mastication. However, an unresolved challenge is how to include intraspecific variability into dietary reconstruction and the biomechanical aspects of chewing. Two extant populations of the grey wolf (), one from Alaska and one from Sweden, were analysed with consideration to intraspecific dietary variability related to prey size depending on geographical origin, sex and individual age as well as tooth function.

Laccase-Treated Polystyrene Surfaces with Caffeic Acid, Dopamine, and L-3,4-Dihydroxyphenylalanine Substrates Facilitate the Proliferation of Melanocytes and Embryonal Carcinoma Cells NTERA-2.

This study presents the effects of treating polystyrene (PS) cell culture plastic with oxidoreductase enzyme laccase and the catechol substrates caffeic acid (CA), L-DOPA, and dopamine on the culturing of normal human epidermal melanocytes (NHEMs) and human embryonal carcinoma cells (NTERA-2). The laccase-substrate treatment improved PS hydrophilicity and roughness, increasing NHEM and NTERA-2 adherence, proliferation, and NHEM melanogenesis to a level comparable with conventional plasma treatment. Cell adherence dynamics and proliferation were evaluated.

Enamel Caries Lesion Depth Obtained by Optical Coherence Tomography and Transverse Microradiography: A Comparative Study.

Introduction: Visual imaging of subsurface caries lesions is of vital interest in dentistry, which can be obtained by invasive radiography technique as well as by available non-destructive imaging approaches. Thus, as a first step toward the development of a new innovative approach, Spectral-domain optical coherence tomography (SD-OCT) was applied to detect the lesion depth in comparison to the established reference technique (transverse microradiography [TMR]).

Methods: Bovine enamel specimens were demineralized for 5 days, following previous studies.

Wear patterns of radular teeth in (Cephalopoda; Mollusca) are related to their structure and mechanical properties.

Radular teeth have to cope with wear, when interacting with ingesta. In some molluscan taxa, wear-coping mechanisms, related to the incorporation of high contents of iron or silica, have been previously determined. For most species, particularly for those which possess radulae without such incorporations, wear-coping mechanisms are understudied.

Age-related changes in the midpalatal suture: Comparison between CBCT staging and bone micromorphology.

The age-related maturation of the human midpalatal suture is challenging to predict, but critical for successful non-surgical rapid maxillary expansion (RME). While cone-beam computed tomography (CBCT) can be used to categorize the suture into stages, it remains unclear how well the stages predict the actual micromorphology of the palate. To address this clinically relevant question, we used CBCT together with three-dimensional micro-computed tomography (μCT) analysis on 24 human palate specimens from individuals aged 14-34 years.

Systematic review and network meta-analysis of restorative therapy and adhesive strategies in root caries lesions.

Aim: This systematic review and network meta-analysis (NMA) aimed to establish a clinically relevant hierarchy of the different adhesive and/or restorative approaches to restore cavitated root caries lesions through the synthesis of available evidence.

Materials And Methods: A systematic search was conducted in Medline/Web of Science/Embase/ Cochrane Library/Scopus/grey literature. RCTs investigating ≥2 restorative strategies (restorative /adhesive materials) for root caries lesions in adult patients were included.

Effect of the Adhesive Strategy on Clinical Performance and Marginal Integrity of a Universal Adhesive in Non-Carious Cervical Lesions in a Randomized 36-Month Study.

The effectiveness of a universal adhesive applied in three application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA) over 36 months. In 50 patients, three ( = 21) or four ( = 29) non-carious cervical lesions (NCCL) were restored with Venus Diamond Flow (Kulzer GmbH, Hanau, Germany). The adhesive iBond Universal (iBU, Kulzer, Germany) was used in self-etch (SE), etch-and-rinse (ER), or selective-enamel-etch mode (SEE).

Ancient human DNA recovered from a Palaeolithic pendant.

Artefacts made from stones, bones and teeth are fundamental to our understanding of human subsistence strategies, behaviour and culture in the Pleistocene. Although these resources are plentiful, it is impossible to associate artefacts to specific human individuals who can be morphologically or genetically characterized, unless they are found within burials, which are rare in this time period. Thus, our ability to discern the societal roles of Pleistocene individuals based on their biological sex or genetic ancestry is limited.

Variability in molar crown morphology and cusp wear in two Western chimpanzee populations.

Objectives: Chimpanzees (Pan troglodytes) possess a relatively generalized molar morphology allowing them to access a wide range of foods. Comparisons of crown and cusp morphology among the four subspecies have suggested relatively large intraspecific variability. Here, we compare molar crown traits and cusp wear of two geographically close populations of Western chimpanzees, P.

Influence of dental prophylaxis procedures on the tooth veneer interface in resin-based composite and polymer-infiltrated ceramic veneer restorations: an in vitro study.

Objectives: The aim of this study was to investigate the influence of dental prophylaxis cleaning procedures and artificial aging on veneers in human teeth. The external marginal and internal tooth veneer as well as the restoration surfaces were examined.

Material And Methods: Thirty-two extracted premolars were restored with resin-based composite (RBC) and polymer-infiltrated ceramic network (PICN) veneers.

Clinical Outcomes and Quantitative Margin Analysis of a Universal Adhesive Using a Randomized Clinical Trial over Three Years.

The effectiveness of a universal adhesive applied in different application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA). In each of the 22 patients, four non-carious cervical lesions (NCCL) were restored with Filtek Supreme XTE (3M). The adhesive Scotchbond Universal (SBU, 3M) was applied in self-etch (SE), selective-enamel-etch (SEE) or etch-and-rinse (ER) modes.

A skew in poo: Biases in primate fecal isotope analysis and recommendations for standardized sample preparation.

Feces are a treasure trove in the study of animal behavior and ecology. Stable carbon and nitrogen isotope analysis allows to assess the dietary niches of elusive primate species and primate breastfeeding behavior. However, some fecal isotope data may unwillingly be biased toward the isotope ratios of undigested plant matter, requiring more consistent sample preparation protocols.

Post-mortem enamel surface texture alteration during taphonomic processes-do experimental approaches reflect natural phenomena?

Experimental approaches are often used to better understand the mechanisms behind and consequences of post-mortem alteration on proxies for diet reconstruction. Dental microwear texture analysis (DMTA) is such a dietary proxy, using dental wear features in extant and extinct taxa to reconstruct feeding behaviour and mechanical food properties. In fossil specimens especially, DMTA can be biased by post-mortem alteration caused by mechanical or chemical alteration of the enamel surface.

A Computerized Simulation of the Occlusal Surface in Equine Cheek Teeth: A Simplified Model.

Equine mastication, as well as dental wear patterns, is highly important for the development of treatments in equine dentistry. During the last decades, the stress and strain distributions of equine teeth have been successfully simulated using finite element analysis. Yet, to date, there is no simulation available for dental tooth wear in equines.

Evaluation of quantitative light-induced fluorescence to assess lesion depth in cavitated and non-cavitated root caries lesions - An in vitro study.

Background: This in vitro study aimed to assess carious lesions on root surfaces using quantitative light-induced fluorescence (QLF) and to compare the readings with axial lesion depth on µCT.

Methods: The root surfaces of 107 extracted human teeth were included after visual-tactile inspection. For further analysis, the following parameters were assessed: clinical findings (non-cavitated: leathery or hard, cavitated), QLF- (QLF-D Biluminator 2+), and µCT-images (Bruker Skyscan 1172).

The effect of eraser sampling for proteomic analysis on Palaeolithic bone surface microtopography.

Bone surface modifications are crucial for understanding human subsistence and dietary behaviour, and can inform about the techniques employed in the production and use of bone tools. Permission to destructively sample such unique artefacts is not always granted. The recent development of non-destructive proteomic extraction techniques has provided some alternatives for the analysis of rare and culturally significant artefacts, including bone tools and personal ornaments.

Assessibility of different CAD/CAM ceramics with optical coherence tomography.

Objectives: To investigate the light penetration depth of various CAD/CAM ceramics and luting agents by spectral-domain optical coherence tomography (SD-OCT).

Methods: Six CAD/CAM ceramics: lithium disilicate (LS2), zirconia-reinforced lithium silicate (ZLS), lithium aluminosilicate (LAS), polymer infiltrated (PIC), feldspar (FEL) and zirconium oxide (ZRO) and five common luting agents, two self-adhesive and three adhesive materials, were included. SD-OCT wavelengths (1310/1550 nm) and frequencies (5/28 kHz) that are particularly suitable for these materials were investigated.

Dental wear proxy correlation in a long-term feeding experiment on sheep ().

Dietary reconstruction in vertebrates often relies on dental wear-based proxies. Although these proxies are widely applied, the contributions of physical and mechanical processes leading to meso- and microwear are still unclear. We tested their correlation using sheep (, = 39) fed diets of varying abrasiveness for 17 months as a model.

Dental microwear texture gradients in guinea pigs reveal that material properties of the diet affect chewing behaviour.

Dental microwear texture analysis (DMTA) is widely used for diet inferences in extant and extinct vertebrates. Often, a reference tooth position is analysed in extant specimens, while isolated teeth are lumped together in fossil datasets. It is therefore important to test whether dental microwear texture (DMT) is tooth position specific and, if so, what causes the differences in wear.

The Effect of Solutions Containing Extracts of Vochysia tucanorum Mart., Myrcia bellaCambess., Matricaria chamomilla L. and Malva sylvestris L. on Cariogenic Bacterial Species and Enamel Caries Development.

This study evaluated the effect of experimental solutions containing plant extracts on bacterial species and enamel caries prevention. Microcosm biofilm was produced from human saliva mixed with McBain saliva (0.2% sucrose) on bovine enamel for 5 days (3 days under anaerobiosis and 2 days under aerobiosis) at 37°C.

Dental wear patterns reveal dietary ecology and season of death in a historical chimpanzee population.

Dental wear analyses have been widely used to interpret the dietary ecology in primates. However, it remains unclear to what extent a combination of wear analyses acting at distinct temporal scales can be beneficial in interpreting the tooth use of primates with a high variation in their intraspecific dietary ecology. Here, we combine macroscopic tooth wear (occlusal fingerprint analysis, long-term signals) with microscopic 3D surface textures (short-term signals) exploring the tooth use of a historical western chimpanzee population from northeastern Liberia with no detailed dietary records.

Is Continuous Eruption Related to Periodontal Changes? A 16-Year Follow-up.

The aims of this study were to 1) determine if continuous eruption occurs in the maxillary teeth, 2) assess the magnitude of the continuous eruption, and 3) evaluate the effects of continuous eruption on the different periodontal parameters by using data from the population-based cohort of the Study of Health in Pomerania (SHIP). The jaw casts of 140 participants from the baseline (SHIP-0) and 16-y follow-up (SHIP-3) were digitized as 3-dimensional models. Robust reference points were set to match the tooth eruption stage at SHIP-0 and SHIP-3.