Inhalation dosimetry and dose-response analysis of diacetyl, 2, 3-pentanedione, and acetoin using respiratory tract vapor uptake models.

Objective: The objectives are to develop inhalation dosimetry models of the flavoring agents diacetyl, 2, 3-pentanedione, and acetoin to predict uptake throughout the rat and human respiratory tracts and use the results with histopathology data from 2-week, nose-only inhalation exposures in Sprague-Dawley rats to assess relationships between predicted dose and responses.

Methods: Computational fluid dynamics (CFD) models of the nasal passages were used to simulate inspiratory airflow and vapor uptake and mechanistic models of the lung airways were used to simulate vapor uptake during a breathing cycle.

Results: Diacetyl and 2, 3-pentanedione demonstrated similar uptake and wall mass flux patterns throughout the respiratory tract.

Feasibility and effectiveness of an evidence-based intervention bundle to improve peri-operative care of older adults: A quality improvement study.

Background: Maintaining functional status is an essential therapeutic goal in peri-operative care of older adults. Although several recommendations concerning peri-operative management are available, pragmatic approaches to their sustainable implementation are lacking.

Objective: Multiple evidence-based recommendations for peri-operative care of older adults were bundled into a multicomponent intervention and assessed for feasibility and effectiveness.

The fate of an inhaled cigarette puff in the human respiratory tract.

Objective: Cigarette smoking can lead to a host of adverse health effects such as lung and heart disease. Increased lung cancer risk is associated with inhalation of carcinogens present in a puff of smoke. These carcinogenic compounds deposit in the lung at different sites and trigger a cascade of events leading to adverse outcomes.

The Impact of Ultrashort Pulse Laser Structuring of Metals on In-Vitro Cell Adhesion of Keratinocytes.

Besides the need for biomaterial surface modification to improve cellular attachment, laser-structuring is favorable for designing a new surface topography for external bone fixator pins or implants. The principle of this study was to observe how bioinspired (deer antler) laser-induced nano-microstructures influenced the adhesion and growth of skin cells. The goal was to create pins that allow the skin to attach to the biomaterial surface in a bacteria-proof manner.

[The 2021 Activity Report of the Tissue Transplantation and Biotechnology Section of the German Ophthalmological Society].

The Section on Tissue Transplantation and Biotechnology of the German Ophthalmologic Society presented its 11th annual report for the year 2021. The number of corneal samples has still risen in comparison to former years. Nevertheless, there is still a need for import of transplants from abroad.

Updating the biologically based dose-response model for the nasal carcinogenicity of inhaled formaldehyde in the F344 rat.

Chronic inhalation of formaldehyde by F344 rats causes nasal squamous cell carcinoma (SCC). This outcome is well-characterized: including dose-response and time course data for SCC, mechanistic endpoints, and nasal dosimetry. Conolly et al.

Relative contributions of endogenous and exogenous formaldehyde to formation of deoxyguanosine monoadducts and DNA-protein crosslink adducts of DNA in rat nasal mucosa.

Understanding the dose-response for formaldehyde-induced nasal cancer in rats is complicated by (1) the uneven distribution of inhaled formaldehyde across the interior surface of the nasal cavity and, (2) the presence of endogenous formaldehyde (endoF) in the nasal mucosa. In this work, we used computational fluid dynamics (CFD) modeling to predict flux of inhaled (exogenous) formaldehyde (exogF) from air into tissue at the specific locations where DNA adducts were measured. Experimental work has identified DNA-protein crosslink (DPX) adducts due to exogF and deoxyguanosine (DG) adducts due to both exogF and endoF.

Calibration of insulin pumps based on discrete doses at given cycle times.

One application in the medical treatment at very small flow rates is the usage of an Insulin pump that delivers doses of insulin at constant cycle times for a specific basal rate as quasi-continuous insulin delivery, which is an important cornerstone in diabetes management. The calibration of these basal rates are performed by either gravimetric or optical methods, which have been developed within the European Metrology Program for Innovation and Research (EMPIR) Joint Research Project (JRP) 18HLT08 Metrology for drug delivery II (MeDDII). These measurement techniques are described in this paper, and an improved approach of the analytical procedure given in the standard IEC 60601-2-24:2012 for determining the discrete doses and the corresponding basal rates is discussed in detail.

Estimating individual treatment effect on disability progression in multiple sclerosis using deep learning.

Disability progression in multiple sclerosis remains resistant to treatment. The absence of a suitable biomarker to allow for phase 2 clinical trials presents a high barrier for drug development. We propose to enable short proof-of-concept trials by increasing statistical power using a deep-learning predictive enrichment strategy.

Simulation Modeling of Air and Droplet Temperatures in the Human Respiratory Tract for Inhaled Tobacco Products.

Respiratory tract dosimetry predictions for inhalation of tobacco product smoke and aerosols are sensitive to the values of the physicochemical properties of constituents that make up the puff. Physicochemical property values may change significantly with temperature, particularly in the oral cavity and upper airways of the lung, where the puff undergoes adjustments from high temperatures in the tobacco product to reach body temperature. The assumption of fixed property values may introduce uncertainties in the predicted doses in these and other airways of the lung.

Biomechanical in vitro analysis of a novel flexible implant for pubic symphysis disruption using an ultra-high molecular weight polyethylene fiber cord.

Background: Plate osteosynthesis depicts the gold standard to surgically treat pubic symphysis disruptions. However, high rates of implant failure after plate osteosynthesis are reported, probably because of the iatrogenic arthrodesis of this fibrocartilaginous joint. Therefore, flexible implants for treatment of pubic symphysis disruptions appear to be a sensible solution.

Comparison of Total Immunoglobulin G in Ante- and Postmortem Blood Samples from Tissue Donors.

Background: A serology testing for infectious diseases (HIV, hepatitis B and C, syphilis) is mandatory in tissue donors. In many donors postmortem blood is the only sample available. Even though serological tests and nucleic acid amplification tests (NAT) used are validated for postmortem blood, a characterization of those blood samples is not yet established.

SARS-CoV-2: Impact on, Risk Assessment and Countermeasures in German Eye Banks.

Introduction: Since the beginning of the COVID-19 pandemic there has been some debate regarding the risk of transmission through tissue transplantation and tissue banking processes.

Aim Of The Study: To analyze the changes that SARS-CoV-2 has caused regarding the harvesting of corneal donor tissue and eye bank activities in Germany.

Methods: A questionnaire was provided to 26 eye banks in Germany, consisting of questions about adaptations made in the screening of potential donors and the harvesting of corneal tissue following the pandemic spread of SARS-CoV-2.

Pseudophakic corneal donor tissue in Descemet membrane endothelial keratoplasty (DMEK): implications for cornea banks and surgeons.

Objective: Increasingly, cornea banks are recovering donor tissue from pseudophakic donors. Little is known about their suitability for Descemet membrane endothelial keratoplasty (DMEK) surgery in terms of endothelial cell density (ECD) and preparation failure.

Methods And Analysis: We explored ECD during donor tissue preparation in 2076 grafts.

Investigation of Visual System Involvement in Spinocerebellar Ataxia Type 14.

Spinocerebellar ataxia type 14 (SCA-PRKCG, formerly SCA14) is a rare, slowly progressive disorder caused by conventional mutations in protein kinase Cγ (PKCγ). The disease usually manifests with ataxia, but previous reports suggested PRKCG variants in retinal pathology. To systematically investigate for the first time visual function and retinal morphology in patients with SCA-PRKCG.

Increased sensitivity of microbiological testing of cornea organ culture medium by additional resin treatment.

Objective: This validation study investigates the treatment of cornea organ culture medium (Modified Eagle Medium, Biochrom GmbH, Berlin, Germany) with RESEP, a new medical device for antibiotics removal, before microbiological testing with BACTEC blood culture bottles.

Methods And Analysis: 10-100 colony forming units of and were inoculated in 9mL of cornea organ culture medium. In group A, the medium was withdrawn with RESEP and treated for 20 min at room temperature, and then inoculated in BACTEC Plus Aerobic/F/Anaerobic/F blood culture bottles.

Primary Descemet's Membrane Endothelial Keratoplasty for Fuchs Endothelial Dystrophy versus Bullous Keratopathy: Histopathology and Clinical Results.

Purpose: To investigate functional and anatomical results up to 12 months after Descemet's membrane endothelial keratoplasty (DMEK) for Fuchs' endothelial dystrophy (FED) versus bullous keratopathy (BK) in consideration of morphologic characteristics on host's endothelium-Descemet's membranes (EDM).

Methods: In a prospective consecutive case series, 119 eyes underwent a primary DMEK for FED or BK. Intraoperatively obtained EDM were investigated immunohistologically.

Effects of Formulation Variables on Lung Dosimetry of Albuterol Sulfate Suspension and Beclomethasone Dipropionate Solution Metered Dose Inhalers.

The performance of pressurized metered dose inhalers (MDIs) is affected by formulation and device variables that impact delivered dose, aerodynamic particle size distribution, and consequently lung deposition and therapeutic effect. Specific formulation variables of relevance to two commercially available products-Proventil® HFA [albuterol sulfate (AS) suspension] and Qvar® [beclomethasone dipropionate (BDP) solution]-were evaluated to determine their influence on key performance attributes measured experimentally with in vitro cascade impaction studies. These commercial MDIs, utilized as model systems, provided mid-points for a design of experiments (DoE) plan to manufacture multiple suspension and solution MDI formulations.

Implementation of the Single European Code in a Multi-Tissue Bank.

Introduction: The traceability of tissue and cells transplants is important to ensure a high level of safety for the recipients. With the final introduction of the Single European Code (SEC) in April 2017 in the EU a consistent system among all member states became mandatory.

Methods: The regulations for the SEC on EU and national level were evaluated.

[Good practice procedures for acquisition and preparation of cryopreserved human amniotic membranes from donor placentas].

Within the framework of obtaining a valid authorization for tissue preparation of cryopreserved human amniotic membranes at the Paul Ehrlich Institute, pursuant to § 21a paragraph 1 of the German Medicines Act (AMG), parts of the existing good practice procedures for acquisition of cryopreserved human amniotic membranes from donor placentas were reviewed and supplemented by new knowledge. The present good practice procedures were formulated in cooperation with members of the section for tissue transplantation and biotechnology of the German Ophthalmological Society. The current revised version is presented in this article.

Characterisation of medical microfluidic systems regarding fast changing flow rates using optical front tracking methods.

The presented optical flow metering methods are appropriate to characterise the dynamic properties of microfluidic systems. The dynamic behaviour of clinical or medical devices, micro pumps and flow sensors based on thermal methods were investigated. The Camera-System covers a flow range from 50nl/min to 500µl/min.