Perceptions of readiness for independent practice among graduating orthopedic surgery residents in Ontario in the last 30 years.

Background: There is increasing concern regarding the lack of physicians and underresourcing of the medical system in Canada. The training of orthopedic surgeons has emerged as an area of particular concern. The purpose of this study was to gain insight into the outcomes of graduates of orthopedic surgery residency programs in Ontario in the last 30 years.

Delayed fixation of distal radial fractures beyond three weeks after initial failed closed reduction increases the odds of reoperation.

Aims: We aimed to compare reoperations following distal radial fractures (DRFs) managed with early fixation versus delayed fixation following initial closed reduction (CR).

Methods: We used administrative databases in Ontario, Canada, to identify DRF patients aged 18 years or older from 2003 to 2016. We used procedural and fee codes within 30 days to determine which patients underwent early fixation (≤ seven days) or delayed fixation following CR.

Biomechanical design of a new proximal humerus fracture plate using alternative materials.

Comminuted proximal humerus fractures are often repaired by metal plates, but potentially still experience bone refracture, bone "stress shielding," screw perforation, delayed healing, and so forth. This "proof of principle" investigation is the initial step towards the design of a new plate using alternative materials to address some of these problems. Finite element modeling was used to create design graphs for bone stress, plate stress, screw stress, and interfragmentary motion via three different fixations (no, 1, or 2 "kickstand" [KS] screws across the fracture) using a wide range of plate elastic moduli (E = 5-200 GPa).

Material Properties and Engineering Performance of Bone Fracture Plates Made from Plant Fiber Reinforced Composites: A Review.

Bone fracture plates are usually made from titanium alloy or stainless steel, which are much stiffer than bone. However, overly stiff plates can restrict axial interfragmentary motion at the fracture leading to delayed callus formation and healing, as well as causing bone "stress shielding" under the plate leading to bone atrophy, bone resorption, and plate loosening. Consequently, there have been many prior efforts to develop nonmetallic bone fracture plates with customized material properties using synthetic fibers (e.

Rehabilitation after musculoskeletal injury: an overview of systems in the United States and Canada.

As North America is largely industrialized with a variety of available private transportation options, trauma is a common occurrence, resulting in significant burdens of disability and costs to the health care system. To meet increasing trauma care needs, there is a robust organization of trauma and rehabilitation systems, particularly within the United States and Canada. The American and Canadian health care systems share multiple similarities, including well-equipped Level I trauma centers, specialized inpatient rehabilitation units for polytrauma patients, and thorough evaluations for recovery and post-discharge placement.

Early major fracture care in polytrauma-priorities in the context of concomitant injuries: A Delphi consensus process and systematic review.

Background: The timing of major fracture care in polytrauma patients has a relevant impact on outcomes. Yet, standardized treatment strategies with respect to concomitant injuries are rare. This study aims to provide expert recommendations regarding the timing of major fracture care in the presence of concomitant injuries to the brain, thorax, abdomen, spine/spinal cord, and vasculature, as well as multiple fractures.

Biomechanical Design Optimization of Distal Humerus Fracture Plates: A Review.

The goal of this article was to review studies on distal humerus fracture plates (DHFPs) to understand the biomechanical influence of systematically changing the plate or screw variables. The problem is that DHFPs are commonly used surgically, although complications can still occur, and it is unclear if implant configurations are always optimized using biomechanical criteria. A systematic search of the PubMed database was conducted to identify English-language biomechanical optimization studies of DHFPs that parametrically altered plate and/or screw variables to analyze their influence on engineering performance.

An overview of the current diagnostic approach to Periprosthetic Joint Infections.

The diagnosis of periprosthetic joint infections (PJI) presents a formidable challenge to orthopaedic surgeons due to its complex and diverse manifestations. Accurate diagnosis is of utmost importance, as even mild pain following joint replacement surgery may indicate PJI in the absence of a definitive gold standard diagnostic test. Numerous diagnostic modalities have been suggested in the literature, and international societies have continually updated diagnostic criteria for this debilitating complication.

Biomechanical testing of a computationally optimized far cortical locking plate versus traditional implants for distal femur fracture repair.

Background: This study experimentally validated a computationally optimized screw number and screw distribution far cortical locking distal femur fracture plate and compared the results to traditional implants.

Methods: 24 artificial femurs were osteotomized with a 10 mm fracture gap 60 mm proximal to the intercondylar notch. Three fixation constructs were used.

Association Between Periprosthetic Joint Infection and Mortality Following Primary Total Hip Arthroplasty.

Background: Periprosthetic joint infection (PJI) remains a dreaded and unpredictable complication after total hip arthroplasty (THA). In addition to causing substantial morbidity, PJI may contribute to long-term mortality risk. Our objective was to determine the long-term mortality risk associated with PJI following THA.

Cytotoxicity of novel hybrid composite materials for making bone fracture plates.

Bone fracture plates are usually made from steel or titanium, which are much stiffer than cortical bone. This may cause bone 'stress shielding' (i.e.

Orthopedic surgeons' transition into full-time practice over the last 20 years: an analysis using Ministry of Health billing data.

Background: Underemployment is a reality for many new graduates, who accept locum or part-time work as an alternative to unemployment because of lack of opportunities. We sought to analyze orthopedic surgeons' Ontario Health Insurance Program (OHIP) billing data over a 20-year period as a proxy of practice patterns and hypothesized that billing in the first 6 years of practice would be affected by underemployment and locum.

Methods: We analyzed the annual average billing totals of orthopedic surgeons, broken down by year of graduation, year of billings, and number of surgeons billing in that year.

Fasciotomy and rate of amputation after tibial fracture in adults: a population-based cohort study.

Objectives: Limb amputation is a possible outcome of acute compartment syndrome. We undertook this study to investigate the occurrence of fasciotomy and amputation in patients with tibial fractures in the Ontario adult population, aiming to evaluate variables that may be associated with each of these outcomes.

Design: Retrospective, population-based cohort study (April 1, 2003-March 31, 2016).

Postfracture survival in a population-based study of adults aged ≥66 yr: a call to action at hospital discharge.

Postfracture survival rates provide prognostic information but are rarely reported along with other mortality outcomes in adults aged ≥50 yr. The timing of survival change following a fracture also needs to be further elucidated. This population-based, matched-cohort, retrospective database study examined 98 474 patients (73% women) aged ≥66 yr with an index fracture occurring at an osteoporotic site (hip, clinical vertebral, proximal non-hip non-vertebral [pNHNV], and distal non-hip non-vertebral [dNHNV]) from 2011 to 2015, who were matched (1:1) to nonfracture individuals based on sex, age, and comorbidities.

Position statement: management of proximal humerus fractures.

We sought to compare outcomes and reoperation rates for the surgical treatment of proximal humerus fractures (excluding head-splitting fractures, fracture-dislocations, and isolated greater-tuberosity fractures) in men and women older than 60 years. We searched MEDLINE, Embase, and Cochrane through to Feb. 1, 2022, and included all English-language randomized trials comparing operative versus nonoperative treatment; open reduction and internal fixation (ORIF) with locking plate versus intramedullary nail; arthroplasty versus ORIF; and reverse shoulder arthroplasty versus hemiarthroplasty.

Geriatric trauma: there is more to it than just the implant!

Geriatric trauma continues to rise, corresponding with the continuing growth of the older population. These fractures continue to expand, demonstrated by the incidence of hip fractures having grown to 1.5 million adults worldwide per year.

Biomechanical effects of different loads and constraints on finite element modeling of the humerus.

Currently, there is no established finite element (FE) method to apply physiologically realistic loads and constraints to the humerus. This FE study showed that 2 'simple' methods involving direct head loads, no head constraints, and rigid elbow or mid-length constraints created excessive stresses and bending. However, 2 'intermediate' methods involving direct head loads, but flexible head and elbow constraints, produced lower stresses and bending.

The Role of Revision Total Joint Arthroplasty for Periprosthetic Fractures With Unstable Implants.

The management of periprosthetic fractures with unstable prosthetic implants is a challenging and commonly encountered problem. It is important to address the many current issues and controversies regarding the treatment of periprosthetic fractures with revision total joint arthroplasty. Key strategies to optimize surgical decision making around the use of arthroplasty and management of complications following these complex injuries will be addressed.

Fixation Strategies for Periprosthetic Fractures With Stable Implants.

The fixation of periprosthetic fractures remains challenging and controversial. It is important to achieve consensus opinions regarding the management of stable periprosthetic fractures with internal fixation. Key strategies to optimize surgical decision making and fixation and manage complications following these difficult injuries are addressed.

Reducing the Burden of Disease Associated With Periprosthetic Fractures: Prevention and the Need for Improved Perioperative Care.

The management of periprosthetic fractures remains challenging and controversial. There continues to be a significant burden of disease and substantial resource implications associated with fractures following total joint arthroplasty. Achieving consensus opinions regarding the prevention and treatment of this problem has important implications given the profound effect on patient outcomes.

Biomechanical design optimization of proximal humerus locked plates: A review.

Background: Proximal humerus locked plates (PHLPs) are widely used for fracture surgery. Yet, non-union, malunion, infection, avascular necrosis, screw cut-out (i.e.

Biomechanical stress analysis using thermography: A review.

Biomechanics investigators are interested in experimentally measuring stresses experienced by dental structures, whole bones, joint replacements, soft tissues, normal limbs, etc. To do so, various experimental methods have been used that are based on acoustic, optical, piezo-resistive, or other principles, like digital image correlation, fiber optic sensors, photo-elasticity, strain gages, ultrasound, etc. Several biomechanical review papers have surveyed these research technologies, but they do not mention thermography.

Experimental Methods for Studying the Contact Mechanics of Joints.

Biomechanics researchers often experimentally measure static or fluctuating dynamic contact forces, areas, and stresses at the interface of natural and artificial joints, including the shoulders, elbows, hips, and knees. This information helps explain joint contact mechanics, as well as mechanisms that may contribute to disease, damage, and degradation. Currently, the most common in vitro experimental technique involves a thin pressure-sensitive film inserted into the joint space; but, the film's finite thickness disturbs the joint's ordinary articulation.

Mechanical Properties of Synthetic Bones Made by Synbone: A Review.

Biomechanical engineers and physicists commonly employ biological bone for biomechanics studies, since they are good representations of living bone. Yet, there are challenges to using biological bone, such as cost, degradation, disease, ethics, shipping, sourcing, storage, variability, etc. Therefore, the Synbone® company has developed a series of synthetic bones that have been used by biomechanical investigators to offset some drawbacks of biological bone.

Biomechanical properties of artificial bones made by Sawbones: A review.

Biomedical engineers and physicists frequently use human or animal bone for orthopaedic biomechanics research because they are excellent approximations of living bone. But, there are drawbacks to biological bone, like degradation over time, ethical concerns, high financial costs, inter-specimen variability, storage requirements, supplier sourcing, transportation rules, etc. Consequently, since the late 1980s, the Sawbones® company has been one of the world's largest suppliers of artificial bones for biomechanical testing that counteract many disadvantages of biological bone.